Shomy's latest activity
-
Shomy posted the thread Mimic Animal Crossing Island Transfer Tool behaviour from pc in Nintendo Switch.I've found this ldn library on GitHub and I was wondering if it would be possible to mimic the behaviour of the island transfer tool from pc. This would allow theoretically to transfer an island to PC and allowing to "backing it up" without... -
Shomy replied to the thread Switch Lite won't turn on after Failed Picofly install.Got an update from the repair shop. It's unfixable. There's no power to the 3.3V rails and all cpu caps seem to be shorted to ground so they said it's the cpu shorted. Edit: they tried removing all chips too and everything is shorted.
-
Shomy replied to the thread Switch Lite won't turn on after Failed Picofly install.Already tried it, but it does not work. I also tried shorting the test point for booting it without the daughter board. And unfortunately i do not have amp meter for USB-C. I guess I'll have to bring it to a repair shop. Thanks anyway.
-
Shomy replied to the thread Switch Lite won't turn on after Failed Picofly install.In voltage mode it is 0, in diode mode around ~0,8 1714481395 Tried again. The console still does not turn on. The chips as I said seem to be fine, the capacitors too. Could it be the eMMC? As I said in the first post, I unplugged the battery...
-
Shomy replied to the thread Switch Lite won't turn on after Failed Picofly install.I see no shorts neither in the chips nor in the capacitor nearby. To check for shorts I used the 3.3V point that the modchip uses and there's no short. I'm not sure how to check if the powers delivers, i tried measuring the value between ground...
-
Shomy replied to the thread Switch Lite won't turn on after Failed Picofly install.The cap is still there, though it was bridged, didn't notice it. I removed the bridge. Edit: still no power, battery charges (4.2V now) and I measure 15V from the charger cable when unplugging the battery.
-
-
Shomy replied to the thread Switch Lite won't turn on after Failed Picofly install.Managed to clean as much thermal paste as I could. I also measured the Voltage of the Battery (~4V). The battery seems to charge as it was at ~3.8 before (though the battery itself says 3.8V) and on the cpu caps and the rest of the board there...
-
-
Shomy replied to the thread Switch Lite won't turn on after Failed Picofly install.Unsoldered everything and still nothing. Even plugging the charger in does nothing. As for that cable, it was a desperate attempt to see if i could connect the B point somehow. 1714469831 Here's a Pic of the cleaned board. Tried to clean the...
-
-
Shomy replied to the thread Switch Lite won't turn on after Failed Picofly install.Here are the pictures. The wire is connected to the pad at the right of the broken rst, I though that was rst too after I saw a schematic of the switch lite, I'm not sure though at this point. Edit: Forgot to mention, my modchip, as you can see...
-
-
Hello, I tried installing a picofly modchip for the first time and at first everything went smooth, I managed to make it show the picofly logo, but then for some reason the console turned off and when I tried to reboot it, the modchip started...
-
-
-
-
-
-
-
@
K3Nv2:
Buy this hack into a 10gbps line https://www.ebay.com/itm/3947023877...pxoTJiUT82&var=&widget_ver=artemis&media=COPY -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
