Unable to dump OTP.bin
- Thread starter skawo
- Start date
- Views 4,050
- Replies 76
If you sent me the SLC and a list of the the ECC errors during the dump I can see which files are affected, so we could narrow down if it is SLC corruption or bad DRAM.
We could also run the memtest to see if the DRAM is good.
Don't restore the SLC yet, because with that we would loose the information about ECC errors
We could also run the memtest to see if the DRAM is good.
Post automatically merged:
Don't restore the SLC yet, because with that we would loose the information about ECC errors
The console started out with a blinking blue light, so there was definitely something wrong with it to start with.
I don't have a good SLC dump at all - the initial one was made to the caked SD card, and, a cursory look at one I made just now doesn't look promising. I will send everything I can dump to SDIO, though.
I don't have a good SLC dump at all - the initial one was made to the caked SD card, and, a cursory look at one I made just now doesn't look promising. I will send everything I can dump to SDIO, though.
Last edited by skawo,
No uncorrectable ECC errors... that is untypical for SLC corruption... Maybe it ha a messed up system.xml but this doesn't look like the typical a SLC page became bad and corrupted the fw.img problem.
If we had the keys form the otp, we could recrypt another SLC for this console. But everything on the SLC and MLC would be lost. So we would need the correct files for the devkit or whatever this is.
Given the keys, could the files from the mlc not be dumped (if there are any and it wasn't also wiped)?
That said I assume there's very little chance there's anywhere to source the slc stuff from :s
That said I assume there's very little chance there's anywhere to source the slc stuff from :s
I decrypted the seeprom and the bootparams structure is really weird. You can try this though:
Download the attached zip
Copy both to the SD root
Restore the boot1 in minute
Have it fix the SEEPROM values - it should say v8377
Hope PRSHhax works
I could probably re-encrypt my kiosks SLC dump, that could at least get us a starting point. From there you could possibly use mcp_recovery to flash a DDI?
Download the attached zip
Copy both to the SD root
Restore the boot1 in minute
Have it fix the SEEPROM values - it should say v8377
Hope PRSHhax works
Post automatically merged:
I could probably re-encrypt my kiosks SLC dump, that could at least get us a starting point. From there you could possibly use mcp_recovery to flash a DDI?
Similar threads
- No one is chatting at the moment.
-
-
-
@
Veho:
Look, it's China. They know what it's like when you give a poll to half a billion trolls.+1 -
-
-
@
Veho:
I know the pricing of electronics nowadays isn't "how much it actually costs" but "how much we can get away with", but putting up a poll is just cynical.+1
-
-
-
-
-
@
Julie_Pilgrim:
that game's engine is really fucking intensive so it runs like literal shit on xbox 360 and ps3 -
@
Veho:
Nah I'm getting value creep again. I look at a $50 console "but for just a few more dollars you could get XYZ" and I end up considering the Steam Deck.+1
-
-
-
-
@
Julie_Pilgrim:
like you port everything to pc except the one game where it would make the most sense. why. what do you gain from this
-
@
Julie_Pilgrim:
is sega just personally fucking with me? are they laughing while watching me through my kinect camera as i get up to restart my xbox for the third time because the game froze again
-
-
@
K3Nv2:
Valve probably going to do another refresh of the deck this fall with rog ally like specs tbh+1 -
-
-
-
-
-
@
Psionic Roshambo:
Longer battery life cooler temps and faster! What's not to like lol (probably expensive as hell)
@
Psionic Roshambo:
Longer battery life cooler temps and faster! What's not to like lol (probably expensive as hell)