Resource icon

EZ5 Kernel 2.0 RC20

These files are the loaders for the EZ5.
There are five main lines presently in existence:
The 3.0
The 2.0 line
The 1.9 line
The 1.86 line
The older lines.

EZ5i users can only use open beta 1 and beyond of the 3.0 line if they have updated to v101 firmware. Otherwise EZ5i users can only use beta 6 of 1.90 and all the 2.0 line.
EZ5 plus users can only use 1.86c and beyond.
EZ5 original and NYE users can use just about anything they can find.

The 3.0 line was initially aimed at the EZ5i but is based on the 2.0 line.

The 2.0 loaders are a total rewrite of the loader bringing loader speed increases.
They now feature all the features that were initially lost in the transition and they are probably better than those they replaced.

The 1.9 line is a beta line but featured some new and interesting tweaks to things. As of this moment 2.0 does everything better than 1.9 but prior to that

1.86c has some features but not as fully developed as the 2.0 line, it does however have the most stable support for the EZ 3 in 1 GBA slot device. While it is considered the stable version of the three it no longer gets backports of fixes.

The most notable use for the even older lines is that they still use a savelist; this is a list of games and their save types that the EZ5 then emulates. This means roms with anti piracy or otherwise in need of a patch can often work with these versions.
They will feature rudimentary cheats and soft reset only.
General chit-chat
Help Users
  • K3Nv2 @ K3Nv2:
    Switch the switch to resolve your issue
  • Xdqwerty @ Xdqwerty:
    @BigArnold, sorry but i cant, i dont have a switch. also what k3nv2 says is a joke
  • B @ BigArnold:
    That's what I figured. I put a post up in a forum but no one seems to replying to posts there. I also don't what this chat is attached to.
  • K3Nv2 @ K3Nv2:
    General chat as it implies
  • Xdqwerty @ Xdqwerty:
    @BigArnold, try posting in the "switch noob paradise" thread
  • B @ BigArnold:
    That's where I put it. But like I said other people's posts from a day or two ago have no responses. I'm not sure if the chat is part of the Nintendo forum that I'm on or a part of the website as a whole.
  • Xdqwerty @ Xdqwerty:
    @BigArnold, part of the website as a whole
  • Xdqwerty @ Xdqwerty:
    then try making a thread
  • Xdqwerty @ Xdqwerty:
    wait you are too new to be able to do that
  • B @ BigArnold:
    That's fine. I'll find my way.
    +1
  • BigOnYa @ BigOnYa:
    @BigArnold you put the fusee or hekate.bin in the hekate/ payloads folder, or use app to push the payload to switch while its in rcm mode
    +1
  • B @ BigArnold:
    The problem is is that TegraGUI isn't detecting my Switch despite it being plugged in and in RCM or maintenance mode.
    +1
  • BigOnYa @ BigOnYa:
    Did you click install driver inside the tegra app.
  • B @ BigArnold:
    I did all of that stuff and it seemed successful but still nothing. The only thing different from the guide I used was that my device wasn't showing up as APX but rather Nintendo Switch.
  • B @ BigArnold:
    I did it inside the Tegra app and Zadig.
  • BigOnYa @ BigOnYa:
    Try a different USB c cable, or different USB port on your pc.
  • B @ BigArnold:
    I tried a different port and don't have another cable. I'm fairly certain there's no issue with the equipment I'm using.
  • BigOnYa @ BigOnYa:
    Some cheap USB c cables don't send data, they only charge
  • B @ BigArnold:
    The cable is usually used to connect my controller to my switch's dock.
  • BigOnYa @ BigOnYa:
    Only other thing Id suggest is using a phone/tablet and use the Rekato app, or different pc
  • B @ BigArnold:
    Okay then.
    Thanks for your help.
    +2
  • S @ salazarcosplay:
    @Xdqwerty how are you doing!?
  • Xdqwerty @ Xdqwerty:
    @salazarcosplay,
    I keep thinking about killing myself and i believe i dont deserve to be happy... i also feel a bit dizzy
  • S @ salazarcosplay:
    @Xdqwerty I believe
    you deserve to be happy
    Xdqwerty @ Xdqwerty: @salazarcosplay, aw thx