Hardware Help - Esp32-s3 (Pro S3) issue flashing ps4 exploit host

[Evan5935]

hello everyone! i need some help getting my Esp32-S3 up and running. every time I flash a FW with the python route of flashing or using an online flasher (because nodeMCU doesnt recognize the ProS3), I get Either a successful claimed flash (for 4mb FW) but no host when rebooting, or when attempting to flash the 16mb feather S2 versions (because Pro S3 is 16mb) I get "A fatal error occurred: Invalid head of packet (0x6F): Possible serial noise or corruption.". but it isnt corrupted, I downloaded EchoStretch's 7-in-1 like a million times.
i just want offline trainers and mod menus without having to use phone or PC all the time

 

[Leeful]

have you tried https://esp.huhn.me/
I saw a post online with someone having an issue with a ProS3 and they said it worked for them.

 

[Evan5935]

have you tried https://esp.huhn.me/
I saw a post online with someone having an issue with a ProS3 and they said it worked for them.

Hmm.. i have tried it, but I understand little about offsets

Perhaps i am directing it to install in the wrong place or something?

Thank you for any help you can offer!

Post automatically merged: Nov 17, 2022

have you tried https://esp.huhn.me/
I saw a post online with someone having an issue with a ProS3 and they said it worked for them.

Do you know anything about which offset to flash to? and if I need other Bin files?
the issue with esp.huhn.me, is that it requires knowledge about which offset to flash to.
it gives like four options; to flash at 0x10000, 0x8000, 0xE000, and 0x1000

 

[Evan5935]

anyone else have ideas???? it would be much appreciated

Here are the Specs:

• Dual 32bit Xtensa LX7 cores @ up to 240Mhz
• RISC-V Ultra Low Power Co-processor
• 2.4GHz Wifi - 802.11b/g/n
• Bluetooth 5, BLE + Mesh
• 16MB QSPI Flash
• 8MB of extra QSPI PSRAM
• 2x 700mA 3.3V LDO Regulators
• LDO2 is user controlled & auto-shuts down in deep-sleep
• Low power RGB LED
• ULTRA LOW Deep Sleep Current

• USB-C Connector with back-feed protection
• USB ESD protection
• Native USB + USB Serial JTAG
• LiPo Battery Charging + PicoBlade connector
• VBAT and 5V Sense Pins
• 3D High Gain Antenna
• STEMMA QT connector powered by LDO1
• 27x GPIO including castellated headers
• JTAG pins on the header
• TinyPICO/ProS3 compatibility

 

[teeboz]

i have files what ur email