Recent content by mviper28

  1. mviper28

    Hacking Hardware Picofly - a HWFLY switch modchip

    check the lcd connector on board it self, i think some bins ripped of
  2. mviper28

    Hacking Hardware Picofly - a HWFLY switch modchip

    yes
  3. mviper28

    Hacking Hardware Picofly - a HWFLY switch modchip

    can you help to place an order ? this first time doing this is this setting is ok? will it come with preinstalled components or i have to do something in order about the connector i can connect the ribbon cable and the other board came with rp2040 tiny to install firmware and update right?
  4. mviper28

    Hacking Hardware Picofly - a HWFLY switch modchip

    D = 1.310 has incorrect reading it should be between 0.400 to 0.800
  5. mviper28

    Hacking Hardware Picofly - a HWFLY switch modchip

    good job, it would be nice if you add extra pad for led DIN, so if someone need to connect it to switch lite led
  6. mviper28

    Hacking Hardware Picofly - a HWFLY switch modchip

    can you share Gerber file?
  7. mviper28

    Hacking Hardware Picofly - a HWFLY switch modchip

    i used this chip many time and working ok, it came without firmware you need to add it, i use 2.75 https://github.com/rehius/usk/releases
  8. mviper28

    Hacking Hardware Picofly - a HWFLY switch modchip

    I had the same problem 2 days ago with this chip got purple screen on boot when trying to boot to OFW even when I desolder the picofly completely, i also tried old original sxlite and same problem , failed to init retry count is 5 but same problem and the last thing i did is changed the flex...
  9. mviper28

    Hacking Hardware Picofly - a HWFLY switch modchip

    Me too 😒 Its always in rcm mode The strange thing is that the point gives a normal value
  10. mviper28

    Picofly AIO Thread

    too expensive, it's better to give it to the welders
  11. mviper28

    Picofly AIO Thread

    try this https://www.aliexpress.com/item/1005006307809981.html
  12. mviper28

    Picofly AIO Thread

    https://www.aliexpress.com/item/1005006308245249.html
  13. mviper28

    need advice on how to fix joycon drift issue

    Isopropyl Alcohol
  14. mviper28

    Installed hwfly RP2040 boots into OFW

    it's in flex cable on apu 1702229969 that's the mosfets
  15. mviper28

    Installed hwfly RP2040 boots into OFW

    check error code (yellow blinks) Error codes list (= is long pulse, * is short pulse): = USB flashing done ** RST is not connected *= CMD is not connected =* D0 is not connected == CLK is not connected =** eMMC init failure during glitch process =*= CPU never reach BCT check, should not happen...
See more
General chit-chat
Help Users
    Xdqwerty @ Xdqwerty: Also brb