Recent content by DankBreak270

  1. DankBreak270

    Hacking Hardware Picofly - a HWFLY switch modchip

    I was using my switch and it won’t boot into ofw without using hekate I’m on the latest few so how would I update to fix it
  2. DankBreak270

    [Hacking] Use v2 Switch screen on v1 Switch?

    Sorry forgot to say that I only had to use hekate on one of the card readers also after fixing through hekate it still worked on ofw
  3. DankBreak270

    [Hacking] Use v2 Switch screen on v1 Switch?

    I’ve tried 4 different games card readers and they all worked for both v1 and v2 digitizers 1682033119 Got them from v1 and v2 switchs
  4. DankBreak270

    [Hacking] Use v2 Switch screen on v1 Switch?

    This is old but it’s not true you can use v1 screens on a v2 if you need proof I can send a pic if it dosent work at first try to reset the touch screen on hekate works like a charm
  5. DankBreak270

    Second nand backup

    Yeah I didn’t even install tinfoil just used 90dns tester
  6. DankBreak270

    Second nand backup

    I was just wondering if I “dirtied” the nand
  7. DankBreak270

    Second nand backup

    No I modded the switch made a nand backup and then reset the switch on ofw I’m asking if I should make a new nand backup I already tested to make sure the switch wasn’t banned. If I or the person who buys the switch has to restore the nand for whatever reason it won’t allow the use of online you...
  8. DankBreak270

    Second nand backup

    I was dumb and made a nand backup then reset the console when I had to restore the backup (the switch wouldn’t boot without hekate) I had to reset the console again because I would get a error when trying to go online it now works and is not banned but should I make a backup now the only thing I...
  9. DankBreak270

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yes all models of switch can be modded with a pico you need to connect dat 0 for it to work and on oleds that can be difficult
  10. DankBreak270

    Hacking Hardware Picofly - a HWFLY switch modchip

    The size of the resistor doesn’t really matter it’s the amount of ohms that matter I used through hole resistors and they worked fine of course you probably don’t want to use anything smaller than 0603 because it’s difficult to solder to a small resistor 1680167492 To long and to short wires...
  11. DankBreak270

    Hacking Hardware Picofly - a HWFLY switch modchip

    I forget what points there called but the 2 top right ones hook one to vol minus and the other to the power button on the ribbon cable 1680043611 Rcm mode maybe
  12. DankBreak270

    Hacking Hardware Picofly - a HWFLY switch modchip

    Random question but why not hook up data + and - to the pads on the switch then hook up the reset to vol - and the power button so you could flash it after taking off the usb
  13. DankBreak270

    I think I killed my switch trying to install the HWFLY chip. What now?

    Is it me or is the nand connecter look wrong I don’t think that’s what the original solder looks like to me all of the left side look disconnected could just be the angle tho 1680020910 Check the power button if you look on the connector you can short the top 2 together and and should power on...
  14. DankBreak270

    Hacking Hardware Misc Is Wayayeo Safe/Legit

    Your best bet is to save up for a v2 switch and then have it modded I actually have a spare one that I modded that I’m selling
  15. DankBreak270

    Hacking Hardware Misc Is Wayayeo Safe/Legit

    Yeah I don’t feel comfortable modding a oled sorry
See more
General chit-chat
Help Users
    SylverReZ @ SylverReZ: https://www.youtube.com/watch?v=b5aJ-57_YsQ