deeps's latest activity

  • D
    deeps replied to the thread The MIG Switch Thread.
    and with that, we are back to square one - the hype around this product is weird and undeserved and only exists because people keep parroting misinformation about it being a rainbow-shitting unicorn
  • D
    deeps replied to the thread The MIG Switch Thread.
    So if you want to pirate with your migswitch you can: - currently not play anything, since no complete dumps are available anywhere yet - never use any online features again - never download a game update again - never download dlc again - never...
  • D
    deeps replied to the thread The MIG Switch Thread.
    they absolutely can, and I'm fairly certain they will. All they need to do is push another firmware update.
  • D
    deeps replied to the thread The MIG Switch Thread.
    good job spreading misinformation, dumbass. the migswitch always requires all the files.
  • D
    deeps replied to the thread The MIG Switch Thread.
    the migswitch is a cartridge emulator. an xci is not a complete cartridge, just the data partition basically. you need a bunch of additional files beyond the xci to emulate a full cartridge. those files are created when you use the mig dumper...
  • D
    deeps replied to the thread Bluetooth and WiFI are not working...
    if by "switch 2" you mean an oled, you probably forgot to reconnect the antennas
  • D
    deeps replied to the thread Hardware PicoFly or PicoCra*?.
    I use the regular IRFHS8342. I've tested all kinds of combinations of single mosfet, dual mosfet, apu-mount, back mount, different wire thickness, etc. The method you see in the photo above is the one I find works best (glitches the fastest). The...
  • D
    deeps replied to the thread Hacking Do new updates contain all previous updates?.
    Because the developer decided to remove some files that were only used for testing, or decided to compress some stuff that wasn't very well compressed, or... many possible reasons
  • D
    deeps replied to the thread Hardware PicoFly or PicoCra*?.
    There are, but it means you'll have to remove the motherboard. on v1/v2/lite you can normally leave the motherboard attached while installing the modchip. Also, soldering on the cpu isn't that bad. If you have years of experience microsoldering...
    • 2021_0523_193718_087.JPG
  • D
    deeps replied to the thread Hacking Hardware Picofly - a HWFLY switch modchip.
    saw someone else with that as well. it's not an issue
  • D
    deeps replied to the thread Hacking Hardware Picofly - a HWFLY switch modchip.
    run sd card benchmark
  • D
    deeps replied to the thread Hacking Hardware Picofly - a HWFLY switch modchip.
    ==* CPU always reach BCT check (no glitch reaction, check mosfet) something is wrong with your cpu flex.
  • D
    deeps replied to the thread Hacking Hardware Picofly - a HWFLY switch modchip.
    I would start by checking the dat0/cmd resistors (on the chip pcb). if they are 47 ohm they should be replaced with 100 ohm. if this doesn't help i'd try reseating and cleaning around the dat0 adapter. if still no go, get an rp2040-zero or tiny...
  • D
    deeps replied to the thread Hacking Hardware Picofly - a HWFLY switch modchip.
    it has rebooted into recovery mode. try connecting a usb cable from your pc to the switch when it is in this state and things will happen. this happens because your chip is crap.
  • D
    deeps replied to the thread The MIG Switch Thread.
    I guess if you don't intend to use it for piracy it makes sense. to be fair, you'll need to find the usb-c cord for the dumper as well
Show older items
General chit-chat
Help Users
  • No one is chatting at the moment.
    BigOnYa @ BigOnYa: Interesting. The macphone +2