Recent content by enriqueiglesias

  1. E

    Hacking Get SSBB(J) To work on almost all Modchips

    Very little if your wii is already updated to 3.1 before you try this. A lot if it is 3.0 or below You can check you wii firmware's version on the upper right corner of your wii's configuration menu screen.
  2. E

    GBAtemp Exclusive: WiiScrubber

    We are not. YET. And wiiscrubber doesn't take us any closer. It's a completely different thing. But maybe one day ...
  3. E

    GBAtemp Exclusive: WiiScrubber

    Well, we can all be happy. Let me copy-paste myself from another forum and save some typing Those with an original dump only need to: -make a copy of their untouched .iso -run wiiscrub on the copy -run an automatic patcher generator to generate the differences between the untouched and the...
  4. E

    GBAtemp Exclusive: WiiScrubber

    Since the software is just so far ahead, it would probably cost very little to add a "brick-blocker" type of option that, at the same time, will add even a little bit more compression by wiping the update partition. As you know, check number of partitions (32bits value at 0x40000) and decrease...
  5. E

    Hardware Dairantou Smash Brothers WontWorkAfter1.9GUpdadate

    Yeah, I'm sorry But indeed the "eject" method doesn't really work (at all). It sort-of bypasses the whole update. Sure, you hear hommer voice, but the disc wasn't even inside while the update was supposingly taking place, so no update really occurred. It only SEEMED like it was working, but it...
  6. E

    Hacking Get SSBB(J) To work on almost all Modchips

    If he is running the same modchip than you, then the most likely cause is that his wii's reader is tuned too low for the discs you are using. Perhaps he could try finding an even better media/burner combination to burn a disc and see if his wii can read it that way. If not, he could try...
  7. E

    Hacking Get SSBB(J) To work on almost all Modchips

    For those having problems running this game, you should try setting the layerbreak on the recording software (i.e. imgburn->write iso to dvd->tools->settings->write->layerbreak->user specified->2084960). This is almost necessary for d2ckey users and some other non-wiikey chips.
  8. E

    Hacking Report your experiences with DVD DL on the Wii

    For those having problems running this game, you should try setting the layerbreak on the recording software (i.e. imgburn->write iso to dvd->tools->settings->write->layerbreak->user specified->2084960). This is almost necessary for d2ckey users and some other non-wiikey chips.
  9. E

    Gaming Brawl DVD9 problem!

    If you are using wiikey 1.9g, there is a 99% chance that using a different media AND/OR a different burner, would solve your problem. BTW, recommended recording speeds are 2.4x or 4x. If you have any other modchip, specially d2ckey, there may be additional problems you may want to research.
  10. E

    Hacking Wlip

    I'm sorry to bring the bad news but you may want to take care of that drive noise sooner rather than later. A lot of wii's drive mechanisms are breaking down for much less than that. Please note that you should screw the screws in place NOT TOO TIGHT (this is even more important than leaving...
  11. E

    Hacking Report your experiences with DVD DL on the Wii

    Try to burn your iso again and see if you can use +R DL media instead (make sure it doesn't say "made in india"--those suck) and try on a different burner. Also, changing your recording software could really help here, since you seem to have a problem with the media recognition part of the...
  12. E

    Hacking Get SSBB(J) To work on almost all Modchips

    Most likely not. Remember the requirements are: 1)For non-japanese wii's, having your wii updated to the 3.1 level firmware prior to playing the game. Check your wii's configuration menu to see if your wii is 3.1u (USA NTSC-U) or 3.1e (Europe PAL). If it's not at 3.1, connect your wii to the...
  13. E

    Hacking Get SSBB(J) To work on almost all Modchips

    1.9g beta, also called 1.9g hotfix, is the only 1.9g release available. In other words, they are all the same and the only ones.
  14. E

    Hacking Report your experiences with DVD DL on the Wii

    Indeed. But most people have a hard time believing it, and they keep trying more and more burns on the same burner and/or media, when all is needed is to try 2-3 different brands on 2 (3 if you are unlucky) different burners until you find a combination that your wii's likes. Then, just stick to...
  15. E

    Gaming DVD 9 Problems

    No, it also depends a lot on the burner. Usually verbatim, tdk or memorex will work but, occasionally, fails on some burners. If you happen to have another (preferebly non-laptop) burner around, maybe you'd want to try that. Just remember to use slowish burning speed, definitely under 8x...
See more
General chit-chat
Help Users
    BigOnYa @ BigOnYa: I may try the new ram site, and download more RAM to my Switch. Not sure if ddr3 is the right... +1