FiXiNGA's latest activity

  • FiXiNGA
    FiXiNGA replied to the thread XBOX One S Power On and then Off Q9F2.
    Okay I have some news but not finished the console. It was a failure of the mosfet Driver for MemIO. I measured the ground but did not know it before having the circuit diagrams. So I swapped the mosfet driver and the memory now getting 1.5V...
  • FiXiNGA
    FiXiNGA posted the thread XBOX One S Power On and then Off Q9F2 in Microsoft Xbox One.
    Hi, I have a XBOX One S which is beeping, shortly white light and then goes off. I measured all mosfets and observed that the Q9F2 Drain side is deadly shorted. By injecting 2 Amps nothing getting warm. I already pulled the two caps near to...
  • FiXiNGA
    FiXiNGA replied to the thread PS5 interchangeable ram moduls from EDM-010 to EDM-020?.
    thanks a lot. So it is a BGA180, as the one you have linked is not available any more I ordered the same from another shop.
  • FiXiNGA
    FiXiNGA replied to the thread PS5 interchangeable ram moduls from EDM-010 to EDM-020?.
    Hi again. I now have a console where I have to swap all eight modules to Samsung. Sadly I have no suitable stencil here. Does anyone knows the spec, which bga and which spacing is needed for PS5?
  • FiXiNGA
    FiXiNGA replied to the thread PS5 USB not enabled and no synch.
    yes sorry for my bad English. I have seen that the regulator gets warm and measured a short at his output. And the root cause of the short on this output was the cap I marked. After swapping the cap everything runs fine now. The regulator is...
  • FiXiNGA
    FiXiNGA replied to the thread PS5 USB not enabled and no synch.
    So I have some news. Still not working, Southbridge is re balled but not getting better regarding the USB. What I observed: Diode Reading of 5V Rail is -1.9V. That looks weird to me. Maybe a Regulator or diode is burnt? Stdby voltages are all...
    • IMG_2219.jpeg
  • FiXiNGA
    FiXiNGA replied to the thread PS5 USB not enabled and no synch.
    I swapped the WiFi Chip but still no enable for the USB Ports. Next try will be reflowing the Soutbridge cause enable comes from there. Interesting is, that on the transistor circuit in front of the MOSFET enable I did not found 5V or do not know...
  • FiXiNGA
    FiXiNGA replied to the thread PS5 USB not enabled and no synch.
    Okay, I can give it a try and swap with another wifi module from a Donor. Thanks, I will reply if it was the problem
  • FiXiNGA
    FiXiNGA posted the thread PS5 USB not enabled and no synch in Sony PlayStation 5.
    Hi all, I have a new PS5 on my bench. The console is booting normally but it is not possible to synch a controller and since it was resetet to factory no chance to do anything. No of the USB ports is working. I opened the board an checked all...
  • FiXiNGA
    FiXiNGA posted the thread Switch Lite automatically starts in Nintendo Switch.
    Hi all, I have a real weird Switch Lite on my workbench. It came in cause of Blue Screen of Death. I reballed the APU and RAM and cause of an short I swapped the MAX77620 and 77812 with a new one. The switch is going fine now, I added a new...
  • FiXiNGA
    FiXiNGA replied to the thread PS5 EDM 020 TPM Issue.
    No sadly not yet. 1708165781 Okay. I measured around and got 3,3V as well through the PullUp voltage for the Enable line. So I cannot understand what is wrong. The Southbridge ist getting a signal from that TPM. Maybe there is an issue.
Show older items
General chit-chat
Help Users
  • The Real Jdbye @ The Real Jdbye:
    we should kill the political section and ban all the active participants
  • SylverReZ @ SylverReZ:
    @The Real Jdbye, Or not have the political section on a gaming forum to begin with.
  • The Real Jdbye @ The Real Jdbye:
    @SylverReZ yeah, but it's too late for that :(
     +1
  • SylverReZ @ SylverReZ:
    True
  • sp3off @ sp3off:
    do yall think it's safe enough to update to 18.0.1 ?
  • sp3off @ sp3off:
    as a complete newbie on the switch shizzles, i'm afraid to go from 17.0 to 18.0.1
  • K3Nv2 @ K3Nv2:
    Or members could just have self control and learn how to not get so worked up
  • sp3off @ sp3off:
    and most important of all, i don't have any "sysnand CFW", I keep the sys free of modifications for online play
  • SylverReZ @ SylverReZ:
    @sp3off, I would check first on the Switch CFW guide to make sure its safe to update.
  • SylverReZ @ SylverReZ:
    If you really want to ensure that you're super cautious, don't update.
  • The Real Jdbye @ The Real Jdbye:
    i always say there are 2 things which should never be discussed on the internet, politics and religion
     +1
  • The Real Jdbye @ The Real Jdbye:
    in fact, that kinda applies to real life too because discussing them with anybody who doesn't share the same views as you do just leads to conflicts
  • K3Nv2 @ K3Nv2:
    Yet we keep bringing them up
  • mthrnite @ mthrnite:
    VOTE GOD 2024!
  • SylverReZ @ SylverReZ:
    @The Real Jdbye, Or any controversial opinions for that matter, of which they can be used against your will and leads to fights.
  • SylverReZ @ SylverReZ:
    When we voting mthrnite as GBAtemp pres?
  • sp3off @ sp3off:
    @SylverReZ So far on the hacks.guide website nothing seems to indicate that it's safe or not
  • mthrnite @ mthrnite:
    protect trans kids
  • The Real Jdbye @ The Real Jdbye:
    some people are capable of calmly discussing such things, but on a public forum or anywhere with a large amount of people, you're going to have people who can't
     +1
  • sp3off @ sp3off:
    Scires seems to have changed his own 1.7.0 release from "pre-release" to "release", while the tag is still named prerelease
  • K3Nv2 @ K3Nv2:
    Don't melt the snowflakes keep temps down
  • mthrnite @ mthrnite:
    I do not miss moderating religion topics in general OTC.
  • The Real Jdbye @ The Real Jdbye:
    i would even say most people who have any strong opinions on either of them aren't able to discuss them calmly
  • K3Nv2 @ K3Nv2:
    I don't get why we keep discussing things we say we hate
  • SylverReZ @ SylverReZ:
    This is why we can't have nice things.
    SylverReZ @ SylverReZ: This is why we can't have nice things.