Thanks for the reply! Sorry I wasn't clear, I would like to disable autoRCM but am unable to do it in Hekate as it already shows as disabled. Was wondering if I rebuild the Nand if that would fix it? First time dealing with this issue.
I have a V1 unpatched switch that only boots via Hekate - semi stock, sysMMC, and emuMMC launch options all boot successfully. Booting without using Hekate results in a black screen.
Doing some more troubleshooting, the switch is in RCM mode as...
Do the console boot without the chip? If not check the 3.3v rail if it is shorted or not. If it is not shorted check the voltage when you plug the power cable in to see if the 3.3v rail give you 3.3v or not. If it is not then check your 3.3v...
Ok thanks for the confirmation.
In the sthetix level 3 video, he doesn't restore boot0/1, do you know why not? I would think I'd need to restore boot0/1 in my case?
Thanks for the reply!
Unfortunately, I got an error when trying to dump prodinfo. This pretty much means I need to use Level 3 unbrick procedures? Meaning the switch will not be able to go online correct?
Has anyone replaced the OLED eMMC with a smaller one? I have an OLED with a bad Nand and wondering if I can replace with a 32 gb one. My understanding is just the user partition will be smaller. I've seen others upgrading to bigger nands but no...
Has anyone replaced the OLED eMMC with a smaller one? I have an OLED with a bad Nand and wondering if I can replace with a 32 gb one. My understanding is just the user partition will be smaller. I've seen others upgrading to bigger nands but no...
Well guaranteed quality is always subjective. You may seen big companies shipping faulty devices at times.
Mine costs about 1.8usd max all in all, and it is designed based on how I work with switches. So no question about it. I may get 1 out of...
It's fun though. I have ordered all the parts from taobao. Including the board from jlcpcb 100 completed units will cost me 140$. Nearly the cost of rp2040 zero on taobao. But i'm happy with it. The sole reason is fun if you ask me.
Tinyfly v2.0 - the layout is based on the well known rp2040-tiny from waveshare but made for switch.
1. All necessary pads are exposed and the LED DIN as well.
2. Resistors and capacitors are 0402 size for easier soldering
3. Default D0,CMD,CLK...
Does anyone know the value of this cap (circled in black) from the eMMC board? Also would I be able to steal one from a rp2040 tiny? Don't have any zeros unfortunately.