Recent content by linkref

  1. L

    OLED boots straight to OFW 1/20 times

    Ok but what do you suggest, i have good readings value everywhere
  2. L

    Hacking Hardware HWfly-shaped Picofly boards start shipping in China

    Hello, I've modded an OLED switch with pico rp2040 board ready to solder, everything went well. Everything is okay, but i tried like 100 boots for training, and 1 time every 20 boots the switch boots straight to OFW and error code is : short - short - long (**=) If it happens, i just have to...
  3. L

    OLED boots straight to OFW 1/20 times

    I've soldered an hwfly-like pico based, with felxes.
  4. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    Ok so basicly no solution out of the box.. Is it okay to leave it like that ? I think it's okay to fail 1 boot on 30 boot.. ?
  5. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    I thought D0 was that error code : "=* D0 is not connected" Are you sure it's a dat0 error ?
  6. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello, I've modded an OLED switch with pico rp2040 board ready to solder, everything went well. Everything is okay, but i tried like 100 boots for training, and 1 time every 20 boots the switch boots straight to OFW and error code is : short - short - long (**=) If it happens, i just have to...
  7. L

    OLED boots straight to OFW 1/20 times

    Hello, I've modded an OLED switch with pico rp2040 board ready to solder, everything went well. Everything is okay, but i tried like 100 boots for training, and 1 time every 20 boots the switch boots straight to OFW and error code is : short - short - long (**=) If it happens, i just have to...
  8. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi, When I Install a RP2040 based picofly to V1 (erista), switch glitches up in 1 to 3 sec Erista is more like 15 to 45 sec. I use fw 2.73 Is there something to check for this issue ? Thanks a lot !
  9. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi, When I Install a RP2040 based picofly to V1 (erista), switch glitches up in 1 to 3 sec Erista is more like 15 to 45 sec. I use fw 2.73 Is there something to check for this issue ? Thanks a lot !
  10. L

    Picofly slow boot on Mairkos, fine on Erista

    When I said slow boot I meant slow glitching times
  11. L

    Picofly slow boot on Mairkos, fine on Erista

    Hi, When I Install a RP2040 based picofly to V1 (erista), switch glitches up in 1 to 3 sec Erista is more like 15 to 45 sec. I use fw 2.73 Is there something to check for this issue ? Thanks a lot !
  12. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    I had this on switch lite, it was bad solder join
  13. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi everyone, when installing hwfly picofly rp2040 based on switch lite, we cannot see the led indicator when backplate is putting back since the chip is located at the left of the CPU.. Any idea or solution to be able to see the led indicator on switch lites ?
  14. L

    No display after second boot logo, but everything works

    Hi, When i boot my switch, i have a black screen after the second logo... But controls are OK, touchscreen is OK and i have sound... But no display... even if the screen is backlighting... Here is a video : Does anyone have an idea ?
  15. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    i was talking about switch LITE, what are the D point is but where is the S point ? 1694031359 i was talking about switch LITE, what are the D point is but where is the S point ?
See more
General chit-chat
Help Users
    K3Nv2 @ K3Nv2: Stop doing drugs