Purple screen on a modded Oled is almost certainly the CMD resistor. The value should be 4.7k. It looks like they used 30awg which is way too thick, likely broke the resistor terminal. swap those wires for 36awg. the clk via under the...
Purple screen on a modded Oled is almost certainly the CMD resistor. The value should be 4.7k. It looks like they used 30awg which is way too thick, likely broke the resistor terminal. swap those wires for 36awg. the clk via under the...
Purple screen on a modded Oled is almost certainly the CMD resistor. The value should be 4.7k. It looks like they used 30awg which is way too thick, likely broke the resistor terminal. swap those wires for 36awg. the clk via under the...
Purple screen on a modded Oled is almost certainly the CMD resistor. The value should be 4.7k. It looks like they used 30awg which is way too thick, likely broke the resistor terminal. swap those wires for 36awg. the clk via under the...
Purple screen on a modded Oled is almost certainly the CMD resistor. The value should be 4.7k. It looks like they used 30awg which is way too thick, likely broke the resistor terminal. swap those wires for 36awg. the clk via under the...
A tela roxa em um Oled modificado é quase certamente o resistor CMD. O valor deve ser 4,7k. Parece que eles usaram 30awg, que é muito grosso, provavelmente quebrou o terminal do resistor. troque esses fios por 36awg. o clk sob o dissipador de...
Não mudei a porta, no arquivo esta porta 1337 e deixei assim, só mudei o ip, ams só obtenho erro timeout (winerror10060)
I didn't change the port in wupcliente, it says port 1337 which is already in the file, is this correct or could there be...
I did everything again and managed to run python to fix the sysprod, but I can't get past this step.
It seems like it can't connect to the wii u, does the wii u leave it on this error screen to connect? it is already online on my wifi network.
Thanks for your answer! In the Fix section of sys_prod, I was unable to start aroma
"4.Make sure the console is booting into Aroma (should be with wafel_payloader)"
What should I do in this section?
Hello, I managed to proceed with everything except for the part of the mii where I always receive error 155-0206, here is my log file and print of sd files:
https://drive.google.com/drive/folders/1vAd_diYS6TTeKYvo72hgTU7VehyVYfdf?usp=sharing
Anyone update for this? "Everything went fine for me, the log showed no errors at the end, but it seems like I missed something, as I can't start from aroma or the Wii U menu, I only get the black screen of the 'minutes' app, what can I do to...
Everything went fine for me, the log showed no errors at the end, but it seems like I missed something, as I can't start from aroma or the Wii U menu, I only get the black screen of the 'minutes' app, what can I do to start the aroma? thanks.
The way I used to do it was tedious and was quite complex, however with the v2.0 release of the wafel_setup_mlc plugin, region changing has become much simpler.
It is identical to just rebuilding the MLC, but this has region changing specific...
Hi, I also have an imitation HWFLY chip in Pico2040 version, FW 2.75 on Switch V1 erista patched.
During factory reset under OFW 17.0.0 the error message 2002-3540 appears even when there is no SD card in the switch.
I will try to find the...
Only thing drive me crazy is all these new horror games nowadays is its so dark, all time. I can't even play them. I understand they trying to create spooky but be creative a little, not just darkness with pop out scare scenes.