Recent content by Shomy

  1. Shomy

    Mimic Animal Crossing Island Transfer Tool behaviour from pc

    I've found this ldn library on GitHub and I was wondering if it would be possible to mimic the behaviour of the island transfer tool from pc. This would allow theoretically to transfer an island to PC and allowing to "backing it up" without needing homebrew. I tried using it and i managed to...
  2. Shomy

    Switch Lite won't turn on after Failed Picofly install

    Got an update from the repair shop. It's unfixable. There's no power to the 3.3V rails and all cpu caps seem to be shorted to ground so they said it's the cpu shorted. Edit: they tried removing all chips too and everything is shorted.
  3. Shomy

    Switch Lite won't turn on after Failed Picofly install

    Already tried it, but it does not work. I also tried shorting the test point for booting it without the daughter board. And unfortunately i do not have amp meter for USB-C. I guess I'll have to bring it to a repair shop. Thanks anyway.
  4. Shomy

    Switch Lite won't turn on after Failed Picofly install

    In voltage mode it is 0, in diode mode around ~0,8 1714481395 Tried again. The console still does not turn on. The chips as I said seem to be fine, the capacitors too. Could it be the eMMC? As I said in the first post, I unplugged the battery many times, so I wonder if something happened to...
  5. Shomy

    Switch Lite won't turn on after Failed Picofly install

    I see no shorts neither in the chips nor in the capacitor nearby. To check for shorts I used the 3.3V point that the modchip uses and there's no short. I'm not sure how to check if the powers delivers, i tried measuring the value between ground and that same point; 0V
  6. Shomy

    Switch Lite won't turn on after Failed Picofly install

    The cap is still there, though it was bridged, didn't notice it. I removed the bridge. Edit: still no power, battery charges (4.2V now) and I measure 15V from the charger cable when unplugging the battery.
  7. Shomy

    Switch Lite won't turn on after Failed Picofly install

    Managed to clean as much thermal paste as I could. I also measured the Voltage of the Battery (~4V). The battery seems to charge as it was at ~3.8 before (though the battery itself says 3.8V) and on the cpu caps and the rest of the board there are 4V.
  8. Shomy

    Switch Lite won't turn on after Failed Picofly install

    Unsoldered everything and still nothing. Even plugging the charger in does nothing. As for that cable, it was a desperate attempt to see if i could connect the B point somehow. 1714469831 Here's a Pic of the cleaned board. Tried to clean the CPU too, but there was too much thermal paste so I...
  9. Shomy

    Switch Lite won't turn on after Failed Picofly install

    Here are the pictures. The wire is connected to the pad at the right of the broken rst, I though that was rst too after I saw a schematic of the switch lite, I'm not sure though at this point. Edit: Forgot to mention, my modchip, as you can see in the pictures, shipped with an fpc kit...
  10. Shomy

    Switch Lite won't turn on after Failed Picofly install

    Hello, I tried installing a picofly modchip for the first time and at first everything went smooth, I managed to make it show the picofly logo, but then for some reason the console turned off and when I tried to reboot it, the modchip started flashing various errors (*=, *=*, =*). I tried...
  11. Shomy

    Homebrew NSUI Problem with Pokémon for gba

    @TurdPooCharger unfortunately I don't have it, so as you said, the only thing I can do is to use GBARunner2 because changing the motherboard doesn't have any sense lol, I can take directly a new console Anyway thanks for the help tough it didn't work
  12. Shomy

    Homebrew NSUI Problem with Pokémon for gba

    @TurdPooCharger I did everything and it seems to be all ok, except for... Pokemon Fire Red.... Sometimes it let me enter the game, but mostly of the times same problem.....
  13. Shomy

    Homebrew NSUI Problem with Pokémon for gba

    @TurdPooCharger ok, I'm restoring it After it restores, I need to follow the guide on the previous post right?
  14. Shomy

    Homebrew NSUI Problem with Pokémon for gba

    @TurdPooCharger uh.. I have a sysnand backup sooo, If I restore it, it will work again?
  15. Shomy

    Homebrew NSUI Problem with Pokémon for gba

    @TurdPooCharger i arledy did the ctrnand trasnfer using 3ds.guide, but I also backuped some files with Decrypt9, so now I only need to restore all the tickets, the problem is that I don't know how to do it xD
See more
General chit-chat
Help Users
  • No one is chatting at the moment.
    BigOnYa @ BigOnYa: I played the intro to far cry 5, that is like some crazy Jim Jones cult shit. Still its petty...