Switch OLED Black Screen with tactile working

Eds05

Eds05

Member
OP
Newcomer
Level 2
Joined
May 24, 2023
Messages
23
Trophies
0
Age
35
XP
104
Country
France
Hello Guys,

Im trying to repair an OLED switch with blackscreen.

- the console is fully functional docked
- I change 2 times the screen connector
- I swap the motherboard to try the screen (is working)
- the tactile is functioning

I made diodes mesurements and everything is ok exept the pin 35 (0.179v), 28 (shorted, it shouldn’t), 7 (1.163v) and 6 (0.157v).

I followed this picture.


The pin 28 is still shorted without the connector.

Do you have an idea ?
 
jkyoho

jkyoho

Well-Known Member
Member
Level 10
Joined
Sep 2, 2020
Messages
1,278
Trophies
0
Age
39
Location
TORONTO
Website
form.jotform.com
XP
2,209
Country
Canada
pin28(0.667) comes directly from backside LED drive ic, check if anyone worked on the emmc shield and bridge the test point to ground
1713124868573.png
 
Eds05

Eds05

Member
OP
Newcomer
Level 2
Joined
May 24, 2023
Messages
23
Trophies
0
Age
35
XP
104
Country
France
Damn Im so upset it was that, but I touch the driver etc… Im good to buy a new one 😅

Thanks ! At least I learned something more, next time I put solder mask on these points before fixing the dat0 adapter on the emmc.
Post automatically merged:

Ok all my measurements are good on the connector now, but the console does not turn on.

No damages on the board, no shortcuts around power management ICs and the driver of the screen.

The board draws :

Screen connected
- with battery: 0,469A
- without battery : 0,033A and if I reverse the usb c connector I have between 0,005 - 0,008A

Without screen
- with battery : 0,469A with both usb-c side
- without battery: 0,006A switching to 0A and
looping but if I reverse the usb c port I have 0,033A

No reactions of the picofly.

My emmc could be faulty ?
 
Last edited by Eds05,
Eds05

Eds05

Member
OP
Newcomer
Level 2
Joined
May 24, 2023
Messages
23
Trophies
0
Age
35
XP
104
Country
France
Please do not laugh, since the moment I removed the ic driver to try to remove the shortcut on the pin 28 the vcc wire of the picofly was broken … the issue was the hint you gave me. At least like that I did a permanent dat0 and I reconnected the vcc … ahah ridiculous
 

Site & Scene News

Go to forum More news

Popular threads in this forum

Hacking Misc  Getting the MIG Switch to load an XCI dump without its original Initial Data

DBI language error

Emulation Homebrew  duckstation for Switch

Can you trade in a banned switch for an unbanned one?

Why is Atmosphere so dominant?

Last switch firmware blocking MIG SWITCH?

Crosscode Hacking thread

Hacking  Loader.kip for AMS 1.7.0 with FW 17.0.1 - sys-clk error ??

General chit-chat
Help Users
  • TwoSpikedHands @ TwoSpikedHands:
    Do I restart now using what i've learned on the EU version since it's a better overall experience? or do I continue with the US version since that is what ive been using, and if someone decides to play my hack, it would most likely be that version?
  • Sicklyboy @ Sicklyboy:
    @TwoSpikedHands, I'll preface this with the fact that I know nothing about the game, but, I think it depends on what your goals are. Are you trying to make a definitive version of the game? You may want to refocus your efforts on the EU version then. Or, are you trying to make a better US version? In which case, the only way to make a better US version is to keep on plugging away at that one ;)
  • Sicklyboy @ Sicklyboy:
    I'm not familiar with the technicalities of the differences between the two versions, but I'm wondering if at least some of those differences are things that you could port over to the US version in your patch without having to include copyrighted assets from the EU version
  • TwoSpikedHands @ TwoSpikedHands:
    @Sicklyboy I am wanting to fully change the game and bend it to my will lol. I would like to eventually have the ability to add more characters, enemies, even have a completely different story if i wanted. I already have the ability to change the tilemaps in the US version, so I can basically make my own map and warp to it in game - so I'm pretty far into it!
  • TwoSpikedHands @ TwoSpikedHands:
    I really would like to make a hack that I would enjoy playing, and maybe other people would too. swapping to the EU version would also mean my US friends could not legally play it
  • TwoSpikedHands @ TwoSpikedHands:
    I am definitely considering porting over some of the EU features without using the actual ROM itself, tbh that would probably be the best way to go about it... but i'm sad that the voice acting is so.... not good on the US version. May not be a way around that though
  • TwoSpikedHands @ TwoSpikedHands:
    I appreciate the insight!
  • The Real Jdbye @ The Real Jdbye:
    @TwoSpikedHands just switch, all the knowledge you learned still applies and most of the code and assets should be the same anyway
  • The Real Jdbye @ The Real Jdbye:
    and realistically they wouldn't

    be able to play it legally anyway since they need a ROM and they probably don't have the means to dump it themselves
  • The Real Jdbye @ The Real Jdbye:
    why the shit does the shitbox randomly insert newlines in my messages
  • Veho @ Veho:
    It does that when I edit a post.
  • Veho @ Veho:
    It inserts a newline in a random spot.
  • The Real Jdbye @ The Real Jdbye:
    never had that i don't think
  • Karma177 @ Karma177:
    do y'all think having an sd card that has a write speed of 700kb/s is a bad idea?
    trying to restore emunand rn but it's taking ages... (also when I finished the first time hekate decided to delete all my fucking files :wacko:)
  • The Real Jdbye @ The Real Jdbye:
    @Karma177 that sd card is 100% faulty so yes, its a bad idea
  • The Real Jdbye @ The Real Jdbye:
    even the slowest non-sdhc sd cards are a few MB/s
  • Psionic Roshambo @ Psionic Roshambo:
    https://www.youtube.com/watch?v=SjCivnt5t50
  • Karma177 @ Karma177:
    @The Real Jdbye it hasn't given me any error trying to write things on it so I don't really think it's faulty (pasted 40/50gb+ folders and no write errors)
  • DinohScene @ DinohScene:
    run h2testw on it
     +1
  • DinohScene @ DinohScene:
    when SD cards/microSD write speeds drop below a meg a sec, they're usually on the verge of dying
     +1
  • Psionic Roshambo @ Psionic Roshambo:
    Samsung SD format can sometimes fix them too
  • Purple_Heart @ Purple_Heart:
    yes looks like an faulty sd
  • Purple_Heart @ Purple_Heart:
    @Psionic Roshambo i may try that with my dead sd cards
     +1
  • Psionic Roshambo @ Psionic Roshambo:
    It's always worth a shot
  • TwoSpikedHands @ TwoSpikedHands:
    @The Real Jdbye, I considered that, but i'll have to wait until i can get the eu version in the mail lol
    TwoSpikedHands @ TwoSpikedHands: @The Real Jdbye, I considered that, but i'll have to wait until i can get the eu version in the...