Understading ancient GBA flash cartridges
- Thread starter vorob
- Start date
- Views 3,550
- Replies 31
- Likes 2
Open them and check for 32MiB/256Mbit of DRAM/PSRAM.
Or process a retail game through M3 Game Manager and try to run it (Pro can only run multiboots/256kb, Perfect can run most if not nearly all retail games)
Firmware and M3GM can be found here: http://linfoxdomain.com/nintendo/ds/ under the "M3 Perfect v31-v36" category. The prefix depends on the cart language, e* is english (and only goes up to v35. can still use M3GM-v36 with it). Most of these *cannot* be language-changed, only aware of the CF version being able to do so first-hand.
Also when soldering new batteries to these, please be careful. First of all, if the cart uses an ML (rechargeable) instead of CR cell (only aware of the lite doing this, but just in case), you *must* replace it with an ML (not VL, higher voltage!), or protect the battery from being charged. And secondly, use good tools, no direct-to-wall irons (not talking about portables like the pinecil, but those that go straight to an outlet with a regular AC cord) or gas irons, both of which are gonna scorch the fine pads and pull surrounding components off.
For the EZ3in1 NORFlash works on GBA, but still need to flash it from a DS (Wood and YSMenu have native support for this cart, otherwise use GBAExpLoader). And of course the lite version won't fit a GBA (the phat version being exceedingly rare these days)
Main thing that breaks on these is the SRAM. Use this to test it: https://www.gamebrew.org/wiki/3in1_SRAM_Test and if it gives an error *after* reboot, you need a new battery. If it errors *before* reboot, you likely need to reflow and pray it works (sometimes this can still be battery related... sure isn't in my EZ5C10's case though)
Last edited by Janni9009,
The branding confuses me, but the bottom one appears to be the M3 Perfect SD Lite. It should be good, I think.
The top one I have no idea. Google suggests it might be some version of a M3 Pro but I can't find a definite confirmation of that.
Confusingly, there is also a M3 Lite Perfect, which is a newer and entirely different cart only compatible with the DS Lite.
M3's branding and product naming is confusing, they had too many models, and information is hard to find nowadays, I'm actually unsure which models are good and which ones are not.
The only information on the top one I could find is this thread: https://gbatemp.net/threads/which-m3-gba-flash-card-is-this.353463/
Which suggests it could have either 4MB RAM (which would be bad for GBA) or 32MB (which would be good) and the only way to know is to open it up and look at the chips.
Both of the most recent photos were of the same card just on both sides of the pcb. The top loading SD card m3 didn’t just slide out so I left it.
Okay so in all likelihood a new battery and updating the firmware will make it a great choice for backing up my old GBA games without shelling out for the ez-flash omega de?
Edit: actually given my experience or lack there of with soldering these small things probably would rather just spend the extra money.
Post automatically merged:
Here's the images of the toploading one better laid out.
Last edited by ultraforce,
How well does it perform in regards to GBA games and saves? Does it have decent NDS capabilities?
it might be cool if someone figured out how to patch ds games for slot 2 and added compatibility for newer games for the old cards. it's kinda pointless but being able to play games from a slot 2 card is cool from a historical point of view.
anyone remember that old ds homebrew zelda game that only worked from slot 2? good times
anyone remember that old ds homebrew zelda game that only worked from slot 2? good times
interesting, I didnt know nds bootstrap worked on slot-2 cards. how's the compatibility? I dont have my ez4 anymore to check
Similar threads
- No one is chatting at the moment.
-
-
-
@
BigOnYa:
I may try the new ram site, and download more RAM to my Switch. Not sure if ddr3 is the right ram+1
for it tho. Edit- no it uses floppy Ram, just like @AncientBoi -
-
-
-
-
-
-
-
-
-
-
-
-
@
BakerMan:
truth be told, i agree with psi, i dislike both candidates, but i'd probably vote trump simply because the economy was better during his presidency+1 -
@
AngryCinnabon:
Just be careful, if trump ends up winning and using project 2025 America might really change...for the worse. -
-
@
AngryCinnabon:
anything that offers trump an opportunity to become an actual dictator
is bad in my book, i could care less if it wasn't for that... -
-
-
-
-
@
Psionic Roshambo:
@BakerMan, yeah that's about the only reason I would vote for Trump over Biden.+1 -
