I have a shorted moset that's causing the 12v output to short to ground on a ps5 slim PSU.
Can anyone send a link where I can buy one? The closest I can find is
https://www.mouser.co.uk/ProductDetail/YAGEO-XSemi/XP6NA3R5IT?qs=9vOqFld9vZU7VD8y6cwo6g%3D%3D
I have an EDM-020 ps5 that immediately shuts down after turning it on.
UART code reads
80810001 Low General Power Failure (Periphery, GDDR6, APU, Data Line Short)
All the standby voltages are present, but what I have noticed is the inductors across the v core rail are shorting to ground with...
I have a Nintendo switch that came in for repair, usual m92 and p13 short.
I've changed the USB port m92 and p13.
The console boots up and works fine but is only drawing between 0.22 and 0.47 amp's
After some testing I found that the usb port is constantly outputting 5v, my usb c amp meter...
I have a backup of my prod.keys but not the prodinfo.bin
Can I rebuild a prodinfo.bin using my prod.keys so I can go online.
I have no other backup only the prod.keys and the console doesn't boot
I'm working on a water damaged switch that after cleaning has no shorts.
Correct voltages coming out of the max77620.
Initially it was only drawing 0.03 amps, so I changed the 2 max77621 second stage regulators and reflowed the max77620. And changed the bq and m92 (the water damage was around...
Hello all,
I'm maximus from the UK. Want to learn about hardware and repairing consoles, and share my knowledge with you guys too.
Thanks for having me
I've had to replace the fpc lcd connector as there was a bent pin,
After putting the console back together the fan just stays on and it's at full speed, I mean it's throwing out lots of air.
I know the fan connector is next to the LCD fpc connector, but can't see anything odd.
I'm getting...