Search results

  1. N

    Hacking Hardware Picofly - a HWFLY switch modchip

    I found a solution for OLED switches with Dat0 adapter which are capricious and refuse to start. I tap lightly on the place indicated in the photo, this is obviously enough to put the adapter back on the chip and the console then starts on Atmosphere. Could this pose a real risk for the...
  2. N

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello everybody I have an rp2040 clone ordered from Ali. I installed it on my switch v2 and I get an RST error at boot. The rst point of the chip is shorted. When I remove the battery, the short circuit is no longer. When I put the battery back in and restart it comes back with the error **...
  3. N

    Hacking Hardware Picofly - a HWFLY switch modchip

    I tried to use an AON6414A mosfet and still get an error ==*. Does anyone have a photo of its setup? THANKS
  4. N

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi do you have a photo of your installation with this mosfet?
  5. N

    clone data from one emmc to another

    No unfortunately, I wanted to do the kamikaze method and I drilled too much. But in Hekate i can"t dump the old emmc and copy to the new?
  6. N

    clone data from one emmc to another

    Good morning, I messed up a friend's console. I would like to recover the data from its emmc (backup profile) and copy it to the emmc of the motherboard which I will replace. How to do it please.
  7. N

    Hacking Hardware Picofly - a HWFLY switch modchip

    I spent two hours yesterday on a console. Error ==* I tested different mosfets. In the end the error came from the fact that I was using a chip that was already used on another console. By changing the chip, it starts perfectly.
  8. N

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi Is it necessary to put the aluminum cover back on v1 and v2?
  9. N

    Oled Kamikaze dat0 error *=* no emmc block 0

    thanks for all reply, the mortherboard is dead.
  10. N

    Oled Kamikaze dat0 error *=* no emmc block 0

    No. before using the kamikaze method I used the adapter but it didn't work as it should. So I did the kamikaze method and since then the console no longer starts at all with a black screen ofw.
  11. N

    Oled Kamikaze dat0 error *=* no emmc block 0

    Hello everyone I wanted to test the kamikaze method on an Oled Switch and I got the code *=* Here are the measurements on the point dat0 0.511 0.620 I'll give you a photo of the suicide bomber I committed. If anyone can give me an idea THANKS
  12. N

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi everybody Is it possible to replace a nand without any information from the old one.
  13. N

    X360 USB Pro V2 Issue

    Thanks for reply My device work fine and he's detected and show in jungle flasher but no drive detected. I detect drive in jungle flasher when i connect the drive to the console and sata in the x360usb pro v2. I think i have a short circuit or a faulty component in the X360 usb pro Sorry for...
  14. N

    X360 USB Pro V2 Issue

    Hello everyone I have a problem with X360 USb Pro v2, it turns on fine but impossible to detect the DVD Player. The Eject button does nothing. If anyone has the diagram or a component to check, thank you.
  15. N

    Hacking Read parental control code from nand

    thanks but i can't have confirmation number.
  16. N

    Hacking Read parental control code from nand

    Hi Sorry for my english. I bought nintendo Wii U, it didn't give me the parental code or the password of the nintendo network identifiers. I can't do anything except try more than one code combination. Do you think that if I dump the nand I could read the parental code or another solution...
  17. N

    Hardware Black Screen after replace LCD

    Hello everyone, Yesterday I wanted to change the lcd screen of my switch because it display horizontal color lines. By dismounting the console, I zapped to remove the battery connector, before removing the LCD. I go up the console with a new screen, and when I turn on the console, the screen...
General chit-chat
Help Users
  • No one is chatting at the moment.
    K3Nv2 @ K3Nv2: https://youtu.be/22tVWwmTie8?si=2CEDZldUW5ODozYh meh