Search results

  1. C

    Nintendo Switch Oled Stuck at Nintendo Logo

    You can try to remove/redo the clk point. First remove it and test again.. if still persisst then remove dat0 point also.
  2. C

    Hacking Hardware Picofly - a HWFLY switch modchip

    its AON 6554
  3. C

    Hacking Hardware Picofly - a HWFLY switch modchip

    or you can do like this, never failed on me.
  4. C

    Picofly AIO Thread

    If you are sure about your wiring and soldering quality then Try to change/replace the pico/modchip (i solved mine with that). That last part is expected, all is like that, so nothing to worry.
  5. C

    Picofly AIO Thread

    Maybe you can try to move all wires on to emmc points.
  6. C

    Hacking Hardware Picofly - a HWFLY switch modchip

    LOL, want to see it performs : ordered in hundreds.. Like a boss.. Hahaha:grog:
  7. C

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi @abal1000x , I've found an OLED which sometimes can glitch and sometimes cannot .. using an DAT0 adapter.. Continuity is good, but still throws dat0 error code. Just want to know your opinion regarding bellow voltages and ranges test. Can we check it directly on the switch unit to know this...
  8. C

    Hacking Hardware Picofly - a HWFLY switch modchip

    Post some pictures please
  9. C

    Hacking Hardware Picofly - a HWFLY switch modchip

    Based on Firmware 2.75, all 47ohm.. Mariko V2. GOAT.
  10. C

    Hacking Hardware Picofly - a HWFLY switch modchip

    No .. im using green Pi Pico. Maybe with 100ohm dat0 the voltage is on the low side of firmware check so it throws error, as maybe if there is no check inplace it woild boot.. just maybe. 1694271687 At least now its safe to know that pico will go to lowest power mode after glitch. 1694271983...
  11. C

    Hacking Hardware Picofly - a HWFLY switch modchip

    Not sure yet. But both unit are now using 47.. with new firmware they dont raise slow emmc warning at least.
  12. C

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi @abal1000x , just to inform that i have 2 oled unit that throw dat0 error when using 100ohm.. i replace it with 47ohm and its boots. So this resistor value is still not universal for all cases. Will try 2.75 to see if slow issue and sleep battery drain is better. 1694260740 Firmware is...
  13. C

    Picofly AIO Thread

    Its a DAT0 not conected error. First (Hope) : unsolder the D0 wire from pico, check the wire continuity with ground, if still there then try to resolder it again to pico and try. Last Thing (most likely) : Pull out the mobo. then resolder/refix the DAT0 adapter.
  14. C

    Picofly AIO Thread

    Please be patient, no need to double post.. I already reply on other thread.
  15. C

    Hacking Hardware Picofly - a HWFLY switch modchip

    You already succeed. Firmware will will first check and give error rst not connected (short - short) blinks if nothing is connected, so by this then you know that firmware is already running on pico.
  16. C

    Hacking Hardware Picofly - a HWFLY switch modchip

    you are using sysmmc or emummc ? also what switch firmware is based on 16.0.3 or 16.1.0 ? 1694051215 i believe you can find some picture somewhere in this thread, its either traces are cut or via are destroyed.
  17. C

    Hacking Hardware Picofly - a HWFLY switch modchip

    Recheck your atmos version supported firmware and switch firmware should match. Or try default atmos without using any custom packs.
  18. C

    Hacking Hardware Picofly - a HWFLY switch modchip

    Use some kind of magnifier, scratch it until it change color from green(pcb mask) to gold/yellow(copper), after that let the solder tin and flux do the talk.
  19. C

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yup, its kinda dumb, maybe even dumber than kamikaze drill attack.. rofl.. anyway just for thought.
  20. C

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yes .. i think we just need normally open reed switch, also it can be put anywhere. Also anyone knows whether neodim magnet will destroy emmc data or even chip itself, as i also want to put little magnet into dat0 adapter just so somebody can wiggle it using a magnet to solve a potential...
General chit-chat
Help Users
  • Minox @ Minox:
    I'll stick with my kimchi thank you
  • AncientBoi @ AncientBoi:
    lol
  • K3Nv2 @ K3Nv2:
    Triglycerides almost 900
  • Minox @ Minox:
    No idea what any of those things you mention are
     +1
  • K3Nv2 @ K3Nv2:
    Cholesterol and Triglycerides? Basically a way they measure fatty cells in your blood
  • AncientBoi @ AncientBoi:
    Cholesterol is sorta high, according to my doc
     +1
  • K3Nv2 @ K3Nv2:
    I've been taking fiber pills, eating more grapes, switched to wheat bread in hopes to lower it
     +1
  • BigOnYa @ BigOnYa:
    I like wheat bread, I even like the chunky wheat bread with pieces of whole grain in it.
  • K3Nv2 @ K3Nv2:
    Been getting this honey wheat bread from aldis pretty decent not very sweet to out do it
  • K3Nv2 @ K3Nv2:
    Me making any food at home is an improvement to how I use to be
     +1
  • BigOnYa @ BigOnYa:
    I have an bread machine and use it alot, better than breads you buy, but don't last as long, cause no bs preservatives
  • K3Nv2 @ K3Nv2:
    I got compliments about my weight loss and thought well guess I can pig out again now I'm the piggy
  • BigOnYa @ BigOnYa:
    My biggest prob is alcohol, definitely is fattening
  • K3Nv2 @ K3Nv2:
    I know when to stop at least honestly don't get those that go and go with food
  • BigOnYa @ BigOnYa:
    Or those that order 2 big macs , large fry, ice cream sundie, then a diet coke
  • K3Nv2 @ K3Nv2:
    I might get downing two big macs but nah that's it
  • BigOnYa @ BigOnYa:
    Ok that will be $15.99, cash or charge?
  • K3Nv2 @ K3Nv2:
    My go to orders usually a mcdouble and a mcchicken and I'm happy rarely mess with fries
  • K3Nv2 @ K3Nv2:
    Pro tip ask for that clowns jizzmac sauce on your mcdouble
     +1
  • BigOnYa @ BigOnYa:
    Do they charge extra when you add sauce,etc? I know burger king used to not, but don't know nowadays
  • K3Nv2 @ K3Nv2:
    They may squrit it for free if you ask nice
     +1
  • K3Nv2 @ K3Nv2:
    Last time I got bk it was 35c per sauce fuck you king of my nutsack
     +1
  • K3Nv2 @ K3Nv2:
    I'll buy a bottle of baby rays BBQ for $2 and add it from home out of spite
     +1
  • BigOnYa @ BigOnYa:
    I like baby rays, my favorite is KC masterpiece tho. Figured all you could buy is that there.
  • K3Nv2 @ K3Nv2:
    The metro doesn't discriminate good sauce
     +1
    K3Nv2 @ K3Nv2: The metro doesn't discriminate good sauce +1