PS4 Firmware revert help

[efini]

I followed modded warfare guide on youtube to try and revert a PS4 firmware, I got the same motherboard as the one from his video SAC-001 but when try to connect using the PS4 Syscon tool I get the error below, I've checked and pin 15 is lifted and not making contact. I've made sure pin 16 is soldered back. Any hints or advise would be apprciated.

I've checked and the voltage across pin 15 was 3.3v but on pin 16 is 0.44v ... Not sure if this is wrong or write as the wiring diagram shows 5+ is connected to pin 16 but modded warefare doesn't do this and says its not needed!

 

[ZeroT21]

This is a mod even I have never done, but I would suggest you check if the solder points the cables are connected to on the ps4 pcb isn't bridging any nearby pads or tracks

 

[HawaiianInTown]

Are you certain the previous firmware is ≤9.00
I'd hate for you to go through all this trouble just to find out the previous firmware version you can revert to isn't jailbreak-able.

 

[efini]

Are you certain the previous firmware is ≤9.00
I'd hate for you to go through all this trouble just to find out the previous firmware version you can revert to isn't jailbreak-able.

I'm not certain but I bought the console cheap and wanted to try it just for fun. I've already got another that is jailbroken, this is just for learning and fun.

 

[HawaiianInTown]

I like your style my guy good luck. I wish I could help you but I've never done this hack.

 

[Hayato213]

Recheck your soldering.