Recent content by MatinatorX

  1. MatinatorX

    Homebrew Discussion ALC5639 Datasheet for Nintendo Switch Sound IC for Linux Development

    In my research I found that the 5639 is pretty much identical to the 5640. Same footprint, same pinout etc. I confirmed this looking at what runs to and from the 5639 on the Switch mobo. https://pdf1.alldatasheet.com/datasheet-pdf/view/1132327/REALTEK/ALC5640.html Never did find a proper...
  2. MatinatorX

    Hardware Nintendo Switch - SD CARD Alternative Points

    Unfortunately, that ground pin isn't your problem - there are 7 ground pins on the connector, so unless all of them are broken it's something else. It's pretty common for those pins to break away from the PCB but not the connector, so even if a pin is still there it doesn't mean it's doing its...
  3. MatinatorX

    Hardware sd card port issue

    Open the "Spoiler: Pinout SD daughter board to points on the front" spoiler in the post I linked to see what goes where.
  4. MatinatorX

    Hardware sd card port issue

    https://gbatemp.net/threads/nintendo-switch-sd-card-alternative-points.579623/ Good place to start. Your sense pin is the one that's missing. As long as the others are fine you could either solder a jumper wire from the test pad to the SD board as a quick fix or tie that point to ground to make...
  5. MatinatorX

    Hardware Nintendo Switch - SD CARD Alternative Points

    You're correct, purple is CMD. I haven't probed elsewhere on the motherboard but I'm fairly certain all the SD lines go straight to the SoC. You could check the Switchbrew wiki to see if any of the known pad clusters have it but I don't think so. Here's the pinout:
  6. MatinatorX

    Hardware Nintendo Switch - SD CARD Alternative Points

    FYI a lot of pins on the connector are ground, so if one of them goes missing it does not necessarily mean you are stuck as long as it was a ground pin that went missing. Then again, you probably aren't reading up on missing pins unless you can no longer read MicroSD cards. :P Can confirm that...
  7. MatinatorX

    Hoping you're well and come back soon!

    Hoping you're well and come back soon!
  8. MatinatorX

    Homebrew Discussion ALC5639 Datasheet for Nintendo Switch Sound IC for Linux Development

    No worries, thanks for trying. Hopefully @uyjulian can dig it up!
  9. MatinatorX

    Homebrew Discussion ALC5639 Datasheet for Nintendo Switch Sound IC for Linux Development

    Based on some expired links I found, I think the filename is "ALC5639 DataSheet_0.9961.pdf".
  10. MatinatorX

    Homebrew Discussion ALC5639 Datasheet for Nintendo Switch Sound IC for Linux Development

    I don't suppose either of you still happen to still have this datasheet? I've been looking everywhere and can't find it. The link above is gone as is every other link I found. Trying to see if the Lite has test pads for I2S exposed.
  11. MatinatorX

    Hacking MatinatorX, creator of DragonInjector and DragonMMC, has been hit by a C&D by Nintendo.

    The LCD in the Lite uses the MIPI DSI protocol. There are ICs that exist to convert MIPI DSI to HDMI. My plan is to use the Lontium LT8912B to do so, with a supporting chip to add in headphone audio downstream using a good ADC chip built for that. I'd be using the HDMI hotplug detect feature to...
  12. MatinatorX

    Hacking SD car reader down.

    Sorry to hear yours died, it seems to be a design defect with the connector. Many, many people have had this happen. MOLEX 504208-1610 is the P/N, you can find at least one seller on Ali who did a listing for me if you want to try fixing it. I'd talk with your local shops and see if they're set...
  13. MatinatorX

    Hacking DEAD [Shutdown]DragonInjector - Game Cart Payload Injector (Trinket M0 Clone)

    That's the plan! They won't fit quite as well as the v20 boards since I moved the hole inwards on the PCB to line it up better with the hole on the shell, but they will work. If you've ever taken apart your v19 you'll understand - it's doable, but it can be a pain to put the screw back in.
General chit-chat
Help Users
  • No one is chatting at the moment.
    K3Nv2 @ K3Nv2: https://youtube.com/shorts/wZgjSNb-o4c?si=ajt4Lgq_LTYcXxs2 +1