Search results

  1. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    I've had good results with SK and Samsung reballs, but Toshiba seems to be more sensitive. Two went bust after trying to reball. I do 350C one minute then 400C for 10 sec to remove it, 350C to put it back on. Any suggestions are appreciated.
  2. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    This is a dat0 error.. The reason you "sometimes" don't get a glitch is because of the dat0 adaptor. If you want a reliable constant glitch you need to either reball the emmc and solder a direct wire underneath it, or drill that point out. Both are challenging in their respective ways. I...
  3. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    You really are the real deal. Thanks. I'm used to adding a resistor when I get "slow emmc" error, this was a new learning curve for me. Thanks again.
  4. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    I'd appreciate any intake on this: I Modded an OLED with reballing and the back mosfet method. I got a glitch and was able to dump a full backup on hekate. eMMc info intact. The issue is that it does not boot to OFW. I get the Nintendo logo then black screen. No Switch logo. It's also a black...
  5. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    if it boots to OFW. Double-check CLK.
  6. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello guys, Any incidents of consoles getting bricked after updating to 17.00 ?
  7. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thanks, Are you using the latest 2.75fw?
  8. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello, How's everyone doing? For the first time I got a Toshiba OLED, Installed Picofly normally but I'm getting all sorts of mixed up errors and purple screens. Checked all wires and CMD is giving 4.7ko. I'm reading old posts that Picofly is having issues with Toshiba, has this been fixed in...
  9. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    It really is weird that many report a failure to glitch in a one-MOSFET setup. I've stopped using two MOSFETs since 20ish OLEDS ago. It's particularly strange because your last pic shows meticulous work and a great solder amount. I can only think of Solder wire conductivity as the reason for...
  10. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    This is pretty good amount, weird it didnt wotk. I’ve done 10+ back installations all worked nicely, I recommend trying Mechanic TY-V866 solder wire
  11. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello guys, What is the difference between these two errors? **= No eMMC block 1 read (should not happen) *=* No eMMC block 0 read (eMMC init failure?) Based on a couple of OLEDs, it seems to me that block 1 is dead eMMC, and block 0 is related to poor reballing. Could anyone confirm?
  12. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thanks, brother. Appreciate it.
  13. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thanks. I did that and got mmcblk0, mmcblk0boot0, and mmcblk0boot1. I attacked each with dd and was able to inject boot0 and boot1to my eMMC, but rawnand is giving me all sorts of headaches. sometimes I'd get "input/output error occured" and others it'd just give no space available. I should...
  14. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thanks. How do I make sure of that? Do you see anything wrong in the commands I shared? 1695420105 Neat. I got to say I'm in love with your microscope.
  15. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thanks, Snaker. I followed all your restore steps, but after doing the sudo dd of=/dev/mmcblk0 if=rawnand.bin. It runs for a minute then gives an error " no space left" I'm using an eMMC from another broken Switch. Please advise.
  16. F

    Help restoring Switch eMMC with mmcbllk-NX

    I see. How can I completely format a broken switch's eMMC and use it to restore another Switches' eMMC?
  17. F

    Help restoring Switch eMMC with mmcbllk-NX

    Hello, I got the mmcblk-NX tool that allows reading boot0 and boot1. I'd appreciate your help on this: I got plenty of eMMCs from broken switches, and I wanted to use one to restore my Lite ( I got all the backup for it). so I picked a random eMMC from another switch and executed: sudo dd...
  18. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yes, it happened to me in both CLK and Dat0. Readings ok but boots to OFW. That's always an installer issue. I no longer do Dat0 adaptors because it's a hit-and-miss at this point. Even good Aliexpress vendors would later ship shitty adaptors. Nothing beats a good reball, be a reballer!
  19. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    I've been doing a single mosfet on the back ever since it came out. Works great. I like to think the issue is almost always not enough solder. I'm always generous with the amounts on D and S. Maybe some pics? Here's a fast-glitching install:
  20. F

    Hacking Hardware Picofly - a HWFLY switch modchip

    I got the 'slow emmc" message that was fixed by adding a 100ohm resistor only twice in my 100+ installations. That's why I don't choose to do it regularly.
General chit-chat
Help Users
  • No one is chatting at the moment.
  • K3Nv2 @ K3Nv2:
    I mean for 1st party routers iirc linksys use to support it
  • Sicklyboy @ Sicklyboy:
    ahhhh that I have no idea
  • Sicklyboy @ Sicklyboy:
    pretty cool though if so
  • K3Nv2 @ K3Nv2:
    Or from what ive heard ways to set custom imgs for 1st party routers so locked down now days
  • Sicklyboy @ Sicklyboy:
    OPNsense VM and specs and specs of system it's running on. https://imgur.com/a/S9wgGUD
  • Sicklyboy @ Sicklyboy:
    I've turned more features on in OPNsense lately and it's getting kind of high on RAM usage, I see. Probably bump that up to 4GB soon
  • K3Nv2 @ K3Nv2:
    I wanna make a 8core router with support for 20gbps doesn't even sound that silly lol
  • Sicklyboy @ Sicklyboy:
    I only have 1 gig internet but internally I have 10 gig connectivity for everything on my lan lol
  • Sicklyboy @ Sicklyboy:
    fiber connection from my desktop PC back to my core network switch
  • Sicklyboy @ Sicklyboy:
    2 port HPE SFP+ PCIE NIC in my desktop and all of my servers
  • Sicklyboy @ Sicklyboy:
    silly shit
  • Sicklyboy @ Sicklyboy:
    eventually this desktop is going to act as a server too, just for the hell of it. Because this PC is WAY fucking overkill for how little I use it.
  • Sicklyboy @ Sicklyboy:
    And once I do that, my desktop OS that I interact with is just going to be a virtual machine and use GPU passthrough to connect everything
  • K3Nv2 @ K3Nv2:
    Send it to me ffs
  • Sicklyboy @ Sicklyboy:
    No because it's my desktop lol
  • Sicklyboy @ Sicklyboy:
    The most use this PC is getting right now is 979 Chrome tabs open right now
  • K3Nv2 @ K3Nv2:
    This is my desktop there are many like it but it is mine alone
  • K3Nv2 @ K3Nv2:
    Enabled PPPoE on router now no wifi connection lul
  • Sicklyboy @ Sicklyboy:
    F
  • HiradeGirl @ HiradeGirl:
    Anyone knows
    where is Juan?
  • K3Nv2 @ K3Nv2:
    Taken by the feet police
  • HiradeGirl @ HiradeGirl:
    Horny jail?
  • K3Nv2 @ K3Nv2:
    It was a nationwide vote
  • K3Nv2 @ K3Nv2:
    https://store.steampowered.com/app/...-qBzOyr3-fSvsVAhElgxxtT-00dbjbFZCEzw2NhrSJwPD looks solid
     +1
  • BigOnYa @ BigOnYa:
    That does look good
    BigOnYa @ BigOnYa: That does look good