So, I know that some people don't know how to google or unfortunately updated to 11.0.
So, i'l just put here a link that I found saying how to downgrade your 3DS from 11.0 since I haven't found anything mentioning 11.0 Downgrade here

LINK


​

GODDAMN JUST FIND OUT IT WAS POSTED ON CFW AND FLASHCARDS https://gbatemp.net/threads/downgrade-from-11-0-is-now-possible-hardmod-required.426058/ but anyway it's on another forum

 

[The Catboy]

Called it

I predict another hardmod related downgrade to follow this update. Why? Crystal powers.

 

[Spore2]

I should try this once I get a hardmod on my 2ds

 

[motezazer]

If you are on 11.0, I recommend that you follow that tutorial quickly because the next update will probably prevent it. (They just have to update Home Menu)

 

[Dimensional]

Interesting. What if someone found a way to release a custom CIA file to replace the update? Remove/change the hard coded list and change the version data to something the updated 3DS will accept, and then use that to downgrade?

Edit: Thought it over, and realized I wasn't thinking about signatures.

 

[Spore2]

I was going to start this but looks like I have to wait for a OOT3DHax update

 

[agus]

What QR should is use? I on fw 11.0.0 native firm 10.4..
What entry point homebrew?,

 

[Johnal Khow]

I was going to start this but looks like I have to wait for a OOT3DHax update

Where did you get your 3ds hardmodded? cant seem to find anyone in our country )

 

[alkatraz91]

is possibile to do hardmod without using soldering iron(hope is the right name cause i am not english)?

 

[Davidosky99]

is possibile to do hardmod without using soldering iron(hope is the right name cause i am not english)?

N O
O

https://gbatemp.net/threads/list-of-hardmod-installers-by-region.414224/
https://gbatemp.net/threads/tutorial-noob-friendly-nand-dumping-2ds-3ds-3ds-xl-n3ds-n3ds-xl.414498/

 

[alkatraz91]

N O
O

https://gbatemp.net/threads/list-of-hardmod-installers-by-region.414224/
https://gbatemp.net/threads/tutorial-noob-friendly-nand-dumping-2ds-3ds-3ds-xl-n3ds-n3ds-xl.414498/

i have to use it only on the microssd-->sd adapter on on th 3ds too?

 

[Davidosky99]

i have to use it only on the microssd-->sd adapter on on th 3ds too?

what?

 

[alkatraz91]

what?

i have to use the solderin only on the microsd adaptor or on the 3ds too?

 

[Davidosky99]

i have to use the solderin only on the microsd adaptor or on the 3ds too?

just follow the tutorial very, very, very carefully.
if you don't have experience, follow the first link, for someone to hardmod it for yourself
If you have, follow the second very carefully

 

[alkatraz91]

just follow the tutorial very, very, very carefully.
if you don't have experience, follow the first link, for someone to hardmod it for yourself
If you have, follow the second very carefully

i know how to use the soldor,bt i am always scared,and never used on expensive things..only on cheap integrated or so...i hoped there may be a way to avoid the use of the soldor

 

[Davidosky99]

i know how to use the soldor,bt i am always scared,and never used on expensive things..only on cheap integrated or so...i hoped there may be a way to avoid the use of the soldor

nope, you have to use a solder. if you are scared ask someone(first link) to hardmod it for you. It's really not that expensive, considering that a mistake can cost you $200

 

[LeifEricson]

I was going to start this but looks like I have to wait for a OOT3DHax update

Your welcome, just follow the directions below and you should be able to do it.


Did you make sure your using the right files for the system? Yes, each one is for new 3ds and old 3ds.
Start by doing this

1. Insert Legend of zelda Ocarina of time into your system.
2. Start the game and hold A,B,X,Y
3. A menu to format the system will load upon boot, proceed to confirm format game card.
4. Download this archive.https://gbatemp.net/attachments/oot3dhax_11_0-zip.54167/
5. *Extract the archive that reperesents your setup and put the files in the folders on to the sd card with cfw (Homebrew enabled)
6. Use the latest version of FBI installer 2.3.1 Or the SVDT (I used fbi) And inject the "SAVE00.BIN" And "PAYLOAD.BIN" Files to the game card.
7. Download the homebrew starter pack from here. https://smealum.github.io/ninjhax2/starter.zip
8. Extract the contents and put it on the sd card. Make sure the "BOOT.3DSX" file is on the root of the sdcard (Not iniside any folders) And that there is a 3DS folder on there too (DO not confuse with "NINTENDO 3DS Folder, as they both serve different Purposes)
9. Insert game card into the any 3ds with firmware 11.0.0-33, and proceed to load the save file hax as normal and press A button.
10. WELCOME TO THE HOMEBREW

For step 5 Please note there are 3 folders, USA EUR JAN Inside is NEW OLD folders. Use the one that represents your setup. For example i use a USA OLD so i would use that, But depending on the system and country you are, it may be different. Check system menu for what system you have

By looking at the firmware version (Mine is 11.0.0-33-U) the letter will tell you what region your system is.
USA = U (NTSC-U)
EUR = E (PAL-E)
JAP = J (NTSC-J)

In addition to the system the old and new ones are as followed.
Old = Nintendo 3ds, Nintendo 2ds, Nintendo 3ds XL
New = NEW Nintendo 3ds, NEW Nintendo 3ds XL
This should be obvious and not needed to be explained but why not?

I'm sure you're aware at this point since this is kinda old but if you aren't OoTHax is available now for 11.0

 

[alkatraz91]

nope, you have to use a solder. if you are scared ask someone(first link) to hardmod it for you. It's really not that expensive, considering that a mistake can cost you $200

i read that electric tape can be used but u have to be careful,,well in my town there is some pc centre with people able to use the solder,so if i decide i can ask..but i am hoping for a software way

 

[LeifEricson]

i read that electric tape can be used but u have to be careful,,well in my town there is some pc centre with people able to use the solder,so if i decide i can ask..but i am hoping for a software way

Using electric tape in place of solder is never a good idea, especially considering the rather small solder points on the 3DS board. It might work if you're extremely careful about it, but it's not worth the overall insecurity of trying to hold it together with tape. One accidental tug and you could disconnect the wire or worse, short something important out.

That being said, it's not like the soldering itself is particularly difficult, so yes, you could even borrow the tools or have someone make the solders for you.

 

[alkatraz91]

Using electric tape in place of solder is never a good idea, especially considering the rather small solder points on the 3DS board. It might work if you're extremely careful about it, but it's not worth the overall insecurity of trying to hold it together with tape. One accidental tug and you could disconnect the wire or worse, short something important out.

That being said, it's not like the soldering itself is particularly difficult, so yes, you could even borrow the tools or have someone make the solders for you.

i know..i hope really for a software downgrade version instead of hardmod..