rumble works for me on R4iSDHC with TrackMania DS. did you forget to set the 'b mode function'?
see p12 of their "User Manual.pdf" which is a part of the EZDE firmware: https://www.ezflash.cn/zip/omegade1.02.zip
paranoia edit: i do own this cart and dumped a backup of it. see pic. yes, i like james may.
Last edited by korbinian,
I wrote it down, but I went into A mode and changed it to Rumble mode. And I operated the switch in B mode. There is a message in the GBA slot called Option Cartridge, which does not work with R4. Is there a ROM that can set the Rumble mode even if it is a supported game?
Last edited by iuready,
i'm not entirely sure i understand, so i'll just lay out what i did to get it to go bzzzzt
- set HW switch to A position, insert EZDE into slot2, boot without anything in slot1
- navigate to options screen of EZDE
- scroll down and select "Set" at the 2nd line labeled "Mode B", activate "Rumble", then select "OK" (where it said "Set" before).
- turn off DS, set switch to B position, insert slot1 cart, boot game and drive into walls
Last edited by korbinian,
Via the goomba emulator yes, but there's no way for it to play them "native". Not 100% compatibility and etc
Goomba Color isn't compatible with Pokemon Crystal. You are likely SOL on this since this is a long-running issue and Goomba Color is very rarely updated.
Yea if u want to play the games that don't work either buy them real cart or a gb/gbc flashcart like the EZ-Flash Jr. Or the Everdrive offerings
I'm confused. Rumble not working for "Drill Dozer (U)" rom, but works perfectly with Japanese version "Screw Breaker - Goushin Dorirurero (J)". Kernel 1.02, FW 3.0. Any help would be appreciated. All other functions work as expected, vibration for DS games, memory pack mode, DS link mode - all fine.
Drill Dozer (U) rom MD5: 14dab12e795098988d46b96885170538 SHA256: 95b8a2b69103dcbc6fae3504d6c8d93609f3e228444749670592cefcd6bcf47f
Screw Breaker - Goushin Dorirurero (J) rom MD5: 1455d99497a4d004aa0edc0e50bd2530 SHA256: 411cc8ffdacd5698a064ee49cf28a531c34c9a746d341ef9c1cb1cdd5fb7a204
Drill Dozer (U) rom MD5: 14dab12e795098988d46b96885170538 SHA256: 95b8a2b69103dcbc6fae3504d6c8d93609f3e228444749670592cefcd6bcf47f
Screw Breaker - Goushin Dorirurero (J) rom MD5: 1455d99497a4d004aa0edc0e50bd2530 SHA256: 411cc8ffdacd5698a064ee49cf28a531c34c9a746d341ef9c1cb1cdd5fb7a204
In Drill Dozer rumble works after a few minutes in the game.
Try to play it a bit to check if the rumble is working or not.
You are absolutely correct. It works. Japanese rom seems to have more rumble effects, but us version works fine too. Even IPS patched us to european verison works with rumble. Thank you for your help.
We have been using the US version for internal testing and have not had any problems.
We just compared the Japanese version, indeed the Japanese version than the U.S. version more rumble, such as the title screen, the driller breaking the wall. JP version has rumble and US have not.
Last edited by EZ-Flash2,
, Reason: Addtional
In Mode A, my Omega Definitive Edition won't boot in my Game Boy Player with GBI. I get no Nintendo logo. It boots on my SP and original GBA. In Mode B, I get a scrambled Nintendo logo.
My Everdrive GBA X5 and my legitimate cartridges boot in the Game Boy Player. I've cleaned the contacts on both the Omega DE cartridge and the Game Boy Player thoroughly using isopropyl alcohol. The Game Boy Player is completely unmodified. The Omega DE has been updated to the latest firmware/kernel. Any ideas?
EDIT:
This is what it looks like in Mode A
This is what it looks like in Mode B
My Everdrive GBA X5 and my legitimate cartridges boot in the Game Boy Player. I've cleaned the contacts on both the Omega DE cartridge and the Game Boy Player thoroughly using isopropyl alcohol. The Game Boy Player is completely unmodified. The Omega DE has been updated to the latest firmware/kernel. Any ideas?
EDIT:
This is what it looks like in Mode A
This is what it looks like in Mode B
Last edited by coolbho3000,
In Mode A, my Omega Definitive Edition won't boot in my Game Boy Player with GBI. I get no Nintendo logo. It boots on my SP and original GBA. In Mode B, I get a scrambled Nintendo logo.
My Everdrive GBA X5 and my legitimate cartridges boot in the Game Boy Player. I've cleaned the contacts on both the Omega DE cartridge and the Game Boy Player thoroughly using isopropyl alcohol. The Game Boy Player is completely unmodified. The Omega DE has been updated to the latest firmware/kernel. Any ideas?
EDIT:
This is what it looks like in Mode A
This is what it looks like in Mode B
You have to clean your GBPlayer contact. The situation is typical bad contact.
That wasn't the problem. I cleaned the pins very thoroughly. The PCB is not making contact with the GB Player, I think it's because the plastic is slightly thinner than a normal game
I removed the screw on the EZ Flash Omega cart and it's booting now. But this is not an ideal solution.
I unscrewed the EZ Flash cart and moved the top part of the shell "lower" then screwed it back in and now it's working. Maybe there's some plastic tolerances difference. Every other cart works in this GB Player :/
It's weird because the cartridge slot should be the exact same part as all the handheld GBAs. The EZ Flash worked in every one of my GBAs without doing this screw thing - two AGB-001, one AGS-001, and one AGS-101.
It's weird because the cartridge slot should be the exact same part as all the handheld GBAs. The EZ Flash worked in every one of my GBAs without doing this screw thing - two AGB-001, one AGS-001, and one AGS-101.
Last edited by coolbho3000,
Hi. Can I know the official Taobao page so I can purchase the EZ-Flash DE ? Thank you
Similar threads
- No one is chatting at the moment.
-
-
@
Veho:
Look, it's China. They know what it's like when you give a poll to half a billion trolls.+1 -
-
-
@
Veho:
I know the pricing of electronics nowadays isn't "how much it actually costs" but "how much we can get away with", but putting up a poll is just cynical.+1
-
-
-
-
-
@
Julie_Pilgrim:
that game's engine is really fucking intensive so it runs like literal shit on xbox 360 and ps3 -
@
Veho:
Nah I'm getting value creep again. I look at a $50 console "but for just a few more dollars you could get XYZ" and I end up considering the Steam Deck.+1
-
-
-
-
@
Julie_Pilgrim:
like you port everything to pc except the one game where it would make the most sense. why. what do you gain from this
-
@
Julie_Pilgrim:
is sega just personally fucking with me? are they laughing while watching me through my kinect camera as i get up to restart my xbox for the third time because the game froze again
-
-
@
K3Nv2:
Valve probably going to do another refresh of the deck this fall with rog ally like specs tbh+1 -
-
-
-
-
-
@
Psionic Roshambo:
Longer battery life cooler temps and faster! What's not to like lol (probably expensive as hell) -
