Hi everyone,
First thank you for all you share here, I've learned a lot! But now is the time to open my own thread; I can't figure out how to fix it.
I got a FAT Original XBOX ONE 500Gb
version os 22621.4912.amd64fre.xb_flt_2303ni.230608-0120 (so version from 2023-June)
10.0.22621.4918
It was bought in AU- and I'm now in FR > I'm not sure if there is an impact on the OSU1 file for the next steps so I prefer to write this here.
HDD is dead, sometimes it starts but I cannot get anything out of it.
I'm trying to replace it by a HDD 500Gb.
I used the xboxonehdd-master using (a) and it worked perfectly to build this (old) new xboxone HDD with 500gb.
I've created the OSU1 usb stick with the latest version downloaded from xbox website, and the link in the "Original XBOXONE" at the bottom of the page. Which should be more recent than the one on my xbox, because it seems to be from Apr-2024.
The USB Stick is formatted NTFS.
I plug the HDD in the xbox, got the E106 error.
I do factory reset, xbox factory reset then shut down.
I plug in the usb stick, start xbox, E106 error.
Repair > Do OSU from the usb stick.
Loading Version > OK
Verification Version > NOK Crash at 39-40% and xbox shuts down with no warning.
I also tried the optional recommendation to upload directly OSU files in the SystemUpdate folders A & B.
This is where I'm currently stuck, when I start again I got error E101.
I really cannot find a way to fix it.
Any help is welcome!
Thank you
I tried to increase the Update part to be able to copy the OSU1 full content in folder A and B + update file at the root.
Still same error.
I'm gonna try to "slow" format NTFS the usb stick and copy again the OSU1. That's all I can think about.
First thank you for all you share here, I've learned a lot! But now is the time to open my own thread; I can't figure out how to fix it.
I got a FAT Original XBOX ONE 500Gb
version os 22621.4912.amd64fre.xb_flt_2303ni.230608-0120 (so version from 2023-June)
10.0.22621.4918
It was bought in AU- and I'm now in FR > I'm not sure if there is an impact on the OSU1 file for the next steps so I prefer to write this here.
HDD is dead, sometimes it starts but I cannot get anything out of it.
I'm trying to replace it by a HDD 500Gb.
I used the xboxonehdd-master using (a) and it worked perfectly to build this (old) new xboxone HDD with 500gb.
I've created the OSU1 usb stick with the latest version downloaded from xbox website, and the link in the "Original XBOXONE" at the bottom of the page. Which should be more recent than the one on my xbox, because it seems to be from Apr-2024.
The USB Stick is formatted NTFS.
I plug the HDD in the xbox, got the E106 error.
I do factory reset, xbox factory reset then shut down.
I plug in the usb stick, start xbox, E106 error.
Repair > Do OSU from the usb stick.
Loading Version > OK
Verification Version > NOK Crash at 39-40% and xbox shuts down with no warning.
I also tried the optional recommendation to upload directly OSU files in the SystemUpdate folders A & B.
This is where I'm currently stuck, when I start again I got error E101.
I really cannot find a way to fix it.
Any help is welcome!
Thank you
Post automatically merged:
I tried to increase the Update part to be able to copy the OSU1 full content in folder A and B + update file at the root.
Still same error.
I'm gonna try to "slow" format NTFS the usb stick and copy again the OSU1. That's all I can think about.
Last edited by akastyl,
