Homebrew is there an Volume Management homebrew?

[Zerel]

Hello everyone, i've broke the volume switch of my o3dsxl, so i can't turn up or down the volume. Is there some kind of homebrew or maybe an option for rosalina that allow me to change the volume without the switch?

 

[jockep]

I think it's on the todo for rosalina.

Edit: It's appearently under consideration to be added.

 

[Zerel]

I think it's on the todo for rosalina.

Edit: It's appearently under consideration to be added.

oh i see, nice to hear that but it's out there another homebrew that allow me that? (apart of a future rosalina update)

 

[jockep]

oh i see, nice to hear that but it's out there another homebrew that allow me that? (apart of a future rosalina update)

Tried looking around, sadly can't find any brew for that. Maybe someone else knows one but i didn't find any

 

[SomeGamer]

Try any of those alarm clock DSiWare. I remember I could set the volume with a glitch.

 

[Sono]

Hello everyone, i've broke the volume switch of my o3dsxl, so i can't turn up or down the volume. Is there some kind of homebrew or maybe an option for rosalina that allow me to change the volume without the switch?

too bad I have already documented this before it looks like I know what my next minihomebrew will be

 

[Zerel]

Try any of those alarm clock DSiWare. I remember I could set the volume with a glitch.

what do you mean?

too bad I have already documented this before it looks like I know what my next minihomebrew will be

i would love you eternally if you do something like this lol xD

 

[link270]

too bad I have already documented this before it looks like I know what my next minihomebrew will be

Sorry to bump an old thread.

Does anyone know if there is a way to do this yet? My friend has a 2DS with a broken volume slider and I would like to know if there’s a way to do this software side or not?

 

[Sono]

Sorry to bump an old thread.

Does anyone know if there is a way to do this yet? My friend has a 2DS with a broken volume slider and I would like to know if there’s a way to do this software side or not?

yes, it was brought up a few days ago, but I wasn't able to find this thread...
btw, when the volume slider breaks, the volume goes silent or extremely loud? if it goes completely silent then there's a very low chance it can be helped... basically the louder the volume slider gets stuck, the finer adjustments you can make by software (I guess this is a DSi leftover "functionality" for hardware backwards compatibility)

edit: nope, it's not possible... if it's stuck on the loudest or the quietest state then it's ded, and the only other way (which is to patch MCU_FIRM) is not yet(?) possible :/

 

[link270]

yes, it was brought up a few days ago, but I wasn't able to find this thread...
btw, when the volume slider breaks, the volume goes silent or extremely loud? if it goes completely silent then there's a very low chance it can be helped... basically the louder the volume slider gets stuck, the finer adjustments you can make by software (I guess this is a DSi leftover "functionality" for hardware backwards compatibility)

edit: nope, it's not possible... if it's stuck on the loudest or the quietest state then it's ded, and the only other way (which is to patch MCU_FIRM) is not yet(?) possible :/

Bummer. It's luckily stuck in the middle at a pretty decent volume.

 

[1basti1]

Hi, is there still no Homebrew? I recently bought a very cheap 2DS XL with a broken volume slider. Its stuck at the highest volume.

The metal from the slider is gone but i have this little piece to control the volume. But I have to open the device everytime because everytime I restart the 2DS XL the volume is at the maximum level again...

This will never be added to Rosalina I guess...? Its in consideration since two years..

 

[Sono]

Hi, is there still no Homebrew? I recently bought a very cheap 2DS XL with a broken volume slider. Its stuck at the highest volume.

The metal from the slider is gone but i have this little piece to control the volume. But I have to open the device everytime because everytime I restart the 2DS XL the volume is at the maximum level again...

This will never be added to Rosalina I guess...? Its in consideration since two years..

Damn, I completely forgot to release that homebrew... I'll quickly look into it, and try to release it a few days (which most likely means in a few hours, but if something happens then I can only do it a few days later).

Also, I will not add this into Rosalina, but the volume settings do persist between reboots, so you can just set it at boot time.

 

[1basti1]

Damn, I completely forgot to release that homebrew... I'll quickly look into it, and try to release it a few days (which most likely means in a few hours, but if something happens then I can only do it a few days later).

Also, I will not add this into Rosalina, but the volume settings do persist between reboots, so you can just set it at boot time.

Wow nice, thanks.

But Rosalina would be nice though. (to change it on the fly, like in Twilight menu ++ for example, because you have to close this if you want to go to the home menu)

Whatever, thanks again, looking forward to this!

 

[Sono]

Sorry for the delay, it's hard to work on 22month old (2017/08/29) code in the heatwave.

Usage:
SELECT - exit
UP/DOWN - change the volume in 1/64 steps
LEFT - change volume to 0
RIGHT - change volume to 0F / 1F / 2F / 3F / 40 (100%)
L+R - pause music
X/Y - speed up / slow down music

Every time you start this prorgam, it resets your volume to 0, so you don't get blasted again by the loud menu music in case your slider got stuck on a high volume.

Meaning of the text:
- SET: this is what percentage you plan on setting your volume to
- VOL: the first value should be as close to the SET value as much as possible
- VOL: the second value is what value your slider is stuck at; if you can still move your volume slider, try to place it into the 40 to C0 range for maximum adjustment possibilities
- RNG: these are the raw values used for generating the raw VOL value
- OUT: the actual volume outputted by the hardware, should be as close as possible to SET

Downloads:
- without music: https://puu.sh/DNg3S/244c03044a.cia
- with music: https://puu.sh/DNg1e/805d7a95dc.cia

 

[SomeGamer]

Sorry for the delay, it's hard to work on 22month old (2017/08/29) code in the heatwave.

Usage:
SELECT - exit
UP/DOWN - change the volume in 1/64 steps
LEFT - change volume to 0
RIGHT - change volume to 0F / 1F / 2F / 3F / 40 (100%)
L+R - pause music
X/Y - speed up / slow down music

Every time you start this prorgam, it resets your volume to 0, so you don't get blasted again by the loud menu music in case your slider got stuck on a high volume.

Meaning of the text:
- SET: this is what percentage you plan on setting your volume to
- VOL: the first value should be as close to the SET value as much as possible
- VOL: the second value is what value your slider is stuck at; if you can still move your volume slider, try to place it into the 40 to C0 range for maximum adjustment possibilities
- RNG: these are the raw values used for generating the raw VOL value
- OUT: the actual volume outputted by the hardware, should be as close as possible to SET

Downloads:
- without music: https://puu.sh/DNg3S/244c03044a.cia
- with music: https://puu.sh/DNg1e/805d7a95dc.cia

Literally the best thing since DSi Photo Clock. (It could do essentially the same but with much more taps.)

 

[1basti1]

Very nice! Next step is to change the volume on the fly/ingame. If thats even somehow possible.

 

[Sono]

Very nice! Next step is to change the volume on the fly/ingame. If thats even somehow possible.

Without integrating it into HzMod, NTR, or Rosalina, it's not possible.

 

[1basti1]

Im fairly new to the homebrew scene. Soooo, you cant integrate it, I guess? Or how does this work? Submit it to the developers?
Too bad, that "on the fly" feature would be amazing.

But great work though. Thanks again.

 

[toxic9]

what about replace the switch?!
disassembling the 3ds is the most difficult part.
replacing it, it's not too difficult.

 

[1basti1]

what about replace the switch?!
disassembling the 3ds is the most difficult part.
replacing it, it's not too difficult.

I cant solder. And I know nobody who can to that. ‍