Hardware Xbox One X - BGA piece NFD740, please help me to find it !

Z

zreperowane

New Member
Newbie
Level 1
Joined
Oct 27, 2023
Messages
1
Trophies
0
Age
30
XP
3
Country
Poland
testerfan said:
For those looking to use HDMI2C1-6C1 in place of original U21 chip to have full functionality/video output capabilities, use the following guide to fix your system. Not all pins of the chip will be used, since we don't really care about CEC and HEAC/Utility lines (those lines are already protected on the motherboard by TVS diodes), all we care about is boosting CLK, DATA and HPD lines from 3.3V to 5V and getting 5V OUT on Pin 18 of HDMI port.
Difficulty: Advanced
Parts required: 1. HDMI2C1-6C1 chip. 2. QFN-16 breakout board or similar board capable of handling QFN-18 chip with 0.5mm pitch. 3. 0.1uF 10V (or 16V) 0402 capacitor and two 1.8k resistors. 4. Optional: Power Switch IC (found on PS4 board for 5V OUT/Pin 18 of HDMI port).
STEP 1. Prep: A) Secure HDMI2C1-6C1 chip to the breakout board with Pin 1 (FAULT) and Pin 14 (VDD_CEC) of the chip floating and not connected. B) On the breakout board: solder one side of the 1.8k resistors to the SDA and SCL points and link the other side of the resistors to the 5V_OUT rail. C) on the motherboard: replace C14 (for 5V_OUT) with 0.1uF 10V capacitor. D) link SCL_IC (E4) to R_SCL_IC (E5) and SDA_IC (E2) to R_SDA_IC (D5).
STEP 2. (OPTIONAL) HDMI2C1-6C1 chip is enabled as soon as VDD_5V comes in (which is a standby rail and always on when AC cord is plugged in to the power supply), so even if the system is not turned on - you will be getting 5V on Pin 18 (5V_OUT) of the HDMI port, and your TV will be constantly getting power and searching/awaiting video signal when the system is off. To remedy this - use Power Switch IC and wire it according to the diagram, this way our new VDD_5V will come in only when HDD is on.
STEP 3. Wire the motherboard to the breakout board (the way the chip is placed on the breakout board, the following pinout will be used: New TP1 is CEC_IC and TP16 is VDD_IC). Connect combined SDA_IC (E2/D5) to TP3, combined SCL_IC (E4/E5) to TP2, HPD_IC (B5) to TP4, HPD (A1) to TP8, SDA (C1) to TP9, SCL (D2) to TP 10, 5V_OUT (A3) to TP13, new VDD_5V to TP14, VDD_IC to TP16, and link TP11 to GND.
This guide is for Xbox One X motherboard, but obviously can be easily applied to Xbox Series S and X systems as well.

View attachment 323749View attachment 323750View attachment 323751
Click to expand...
Hello, what model of power switch are you using for this method?
 
testerfan

testerfan

Well-Known Member
Member
Level 10
Joined
May 28, 2013
Messages
179
Trophies
1
Age
45
Website
www.fixxmaster.com
XP
2,293
Country
United States
zreperowane said:
Hello, what model of power switch are you using for this method?
Click to expand...
it's taken from PS4 HDMI port circuitry, so i don't have part number for it. Can use any power switching IC with similar capabilities, something like this TI TPS2001DDBVR, should work just fine, only note that EN and OUT on this IC are swapped (see datasheet), so rewire circuitry appropriately according to the datasheet.
 

Site & Scene News

Go to forum More news

Popular threads in this forum

Xbox One/Series dumping exploit AND Xbox One hardware-level exploit discovered!

Game refuses to start no matter what I've tried to do

General chit-chat
Help Users
  • BakerMan @ BakerMan:
    iu
  • K3Nv2 @ K3Nv2:
    Sirloin sounds good tonight
     +1
  • BakerMan @ BakerMan:
    yeah it does
  • BakerMan @ BakerMan:
    RIP Vimm's Lair (most of the games anyway), you will be missed

    also i think this is a great time and reason to bring back a hashtag previously used about ubisoft
  • BakerMan @ BakerMan:
    #stopkillinggames
  • BigOnYa @ BigOnYa:
    #mailmesomesirloinsteak
  • K3Nv2 @ K3Nv2:
    Mail you deeze nuts
  • BigOnYa @ BigOnYa:
    That be cheap, flat rate small envelope. Me- "Hey this envelope is empty, oh that makes since."
  • K3Nv2 @ K3Nv2:
    Still fits in your mouth the same way
  • BigOnYa @ BigOnYa:
    I was looking at steaks other day at grocery, can't believe some cuts (angus) are like $25 a pound. Crazyness. Price of good fish is just as bad.
  • K3Nv2 @ K3Nv2:
    https://youtu.be/S2ekJrhMltw?si=HBd-jbW2O-mdhzUp
     +1
  • BakerMan @ BakerMan:
    when i go to college,what do you guys think i should major?
  • BakerMan @ BakerMan:
    inb4 computer science
  • BigOnYa @ BigOnYa:
    Fake Leg scratching 101
  • K3Nv2 @ K3Nv2:
    IT support you can act like your own farts smell like cherries that way
  • K3Nv2 @ K3Nv2:
    Odin 2s $300 lol no
  • Scarlet @ Scarlet:
    The Mini is even more lol
  • K3Nv2 @ K3Nv2:
    That RG cube is starting to look like the better value price creep option
     +1
  • BigOnYa @ BigOnYa:
    I want a handheld gaming system with a tablet sized screen, like a 8 or10" screen, with controllers that can detach like the Switch.
  • BakerMan @ BakerMan:
    @BigOnYa i was legitimately trying to scratch my leg, this is reminding me of that cylinder post
  • Scarlet @ Scarlet:
    I don't see the buzz about a square screen personally. I think there will be a review on the site within a few weeks though if you are interested.
     +1
  • Scarlet @ Scarlet:
    I've put down the money on the Odin 2 Mini since I just love that Vita form factor. Loved the power of the Odin 2 but the size always put me off, this one seems exactly what I've been wanting.
  • K3Nv2 @ K3Nv2:
    I don't care about the square screen it's just nice to hold something you don't have to stretch your arms a foots length
  • K3Nv2 @ K3Nv2:
    All these things expecting to be super huge is overrated just run a type c cable to your TV if you want a big display or in my case screen mirror it
  • BigOnYa @ BigOnYa:
    On the go tho I meant, I use my tablet and a Bluetooth controller for retro gaming while sitting on my porch or on long car rides sometimes.
    BigOnYa @ BigOnYa: On the go tho I meant, I use my tablet and a Bluetooth controller for retro gaming while sitting...