PS1/2 Emulator WiiStation - Another Fork of WiiSXRX released

[Ouaz]

Thanks for the answer, I can't get the DS3 to work on usb port 1, while Wiistation is launched from usb port 0.

Maybe it's not possible, then.

 

[takashiii]

Thanks for the answer, I can't get the DS3 to work on usb port 1, while Wiistation is launched from usb port 0.

Maybe it's not possible, then.

I just tested by launching Wiistation with my 1GB hard drive and it works, be sure to press the PS button to activate the controller, LED 1 should light up.

 

[BoozUchiha]

I just tested by launching Wiistation with my 1GB hard drive and it works, be sure to press the PS button to activate the controller, LED 1 should light up.

Hi friend, how did you get the controller to work? because I only see the usb hid icon but the controller does not respond or do anything, although on Nintendo it does work for me. Any help would be appreciated ^^

 

[takashiii]

Hi friend, how did you get the controller to work? because I only see the usb hid icon but the controller does not respond or do anything, although on Nintendo it does work for me. Any help would be appreciated ^^

You must put 054C_0268.ini file in wiisxrx/controllers folder.

ini files can be downloaded in the link that was mentioned in previous messages

 

[Ouaz]

I just tested by launching Wiistation with my 1GB hard drive and it works, be sure to press the PS button to activate the controller, LED 1 should light up.

When I plug the DS3 and press the home button, the 4 leds keep blinking, and the controller does not respond. 054C_0268.ini is correctly placed in usb://wiisxrx/controllers.

With HIDTest, the 4 leds blink too, but the controller responds (though it doesn't find the controller.ini file at the USB root)
I tried with 2 different DS3, and 2 different usb cables. No luck.

I never tried HID controllers with my Wii, as I have genuine GC controllers et Classic Controllers (V1). I'll try on Nintendont to see if it works here.

Thanks for the test and the help! (I know the problem is on my side now ^^)

Post automatically merged: Apr 24, 2024

Edit:

I tested the Dualshock 3 on Nintendont (launched from the same USB device on port 0, and the DS3 on port 1) and...

it works!
After pressing the home button, the LED 1 lights up, and the controller responds.

Still no luck with Wiistation.

 

[takashiii]

When I plug the DS3 and press the home button, the 4 leds keep blinking, and the controller does not respond. 054C_0268.ini is correctly placed in usb://wiisxrx/controllers.

With HIDTest, the 4 leds blink too, but the controller responds (though it doesn't find the controller.ini file at the USB root)
I tried with 2 different DS3, and 2 different usb cables. No luck.

I never tried HID controllers with my Wii, as I have genuine GC controllers et Classic Controllers (V1). I'll try on Nintendont to see if it works here.

Thanks for the test and the help! (I know the problem is on my side now ^^)

Post automatically merged: Apr 24, 2024

Edit:

I tested the Dualshock 3 on Nintendont (launched from the same USB device on port 0, and the DS3 on port 1) and...

it works!
After pressing the home button, the LED 1 lights up, and the controller responds.

Still no luck with Wiistation.

Apparently Wiistation always look for files in SD path even when launching it via USB, I've removed sdcard and it no longer detects controllers even with the presence of ini files in wiisxrx/controllers usb folder, So I confirm that HID controllers only work with sdcard

 

[Ouaz]

Apparently Wiistation always look for files in SD path even when launching it via USB, I've removed sdcard and it no longer detects controllers even with the presence of ini files in wiisxrx/controllers usb folder, So I confirm that HID controllers only work with sdcard

Ah, thanks for the info.

So finally, the problem is not my end. ^^

The code for reading the .ini file from the USB port is already implemented, but it seems there's a bug with it.

If xjsxjs197 read this, maybe he will fix it easily.

 

[BoozUchiha]

When I plug the DS3 and press the home button, the 4 leds keep blinking, and the controller does not respond. 054C_0268.ini is correctly placed in usb://wiisxrx/controllers.

With HIDTest, the 4 leds blink too, but the controller responds (though it doesn't find the controller.ini file at the USB root)
I tried with 2 different DS3, and 2 different usb cables. No luck.

I never tried HID controllers with my Wii, as I have genuine GC controllers et Classic Controllers (V1). I'll try on Nintendont to see if it works here.

Thanks for the test and the help! (I know the problem is on my side now ^^)

Post automatically merged: Apr 24, 2024

Edit:

I tested the Dualshock 3 on Nintendont (launched from the same USB device on port 0, and the DS3 on port 1) and...

it works!
After pressing the home button, the LED 1 lights up, and the controller responds.

Still no luck with Wiistation.

Hi friends @Ouaz and @takashiii likewise, I still can't get the PS2 controller to work in wiistation, my VID is: 0E8F and my PID is: 0031. Anyway, I'm sharing my ini file here so you can see it, on Nintendo that's always bothered me. It worked perfectly but in Wiistation it still doesn't work for me. PD: The file that I uploaded here in the forum does not have the .ini extension since it did not let me upload it ^^


Any help I would appreciate please guys @xjsxjs197 @SaulFabre @Jokippo , I really want to be able to use my playstation 2 controller in wiistation as a hid controller <3

 

[takashiii]

Hi friends @Ouaz and @takashiii likewise, I still can't get the PS2 controller to work in wiistation, my VID is: 0E8F and my PID is: 0031. Anyway, I'm sharing my ini file here so you can see it, on Nintendo that's always bothered me. It worked perfectly but in Wiistation it still doesn't work for me. PD: The file that I uploaded here in the forum does not have the .ini extension since it did not let me upload it ^^


Any help I would appreciate please guys @xjsxjs197 @SaulFabre @Jokippo , I really want to be able to use my playstation 2 controller in wiistation as a hid controller <3

This ini should work:
[PS2 Controller For WiiStation] VID=0E8F PID=0031 Polltype=1 DPAD=1 DigitalLR=1 MultiIn=1 MultiInValue=01 KeyA=5,80 KeyB=5,40 KeyX=5,20 KeyY=5,10 KeyL1=6,04 KeyR1=6,08 KeyL2=6,01 KeyR2=6,02 KeyStart=6,20 KeySelect=6,10 KeyLeft=5,06 KeyDown=5,04 KeyRight=5,02 KeyUp=5,00 RightUp=5,01 DownRight=5,03 DownLeft=5,05 UpLeft=5,07 StickX=3,1A,100 StickY=4,1A,100 CStickX=2,1A,100 CStickY=1,1A,100 LAnalog=0 RAnalog=0 Rumble=1 RumbleType=0 RumbleDataLen=05 RumbleDataOn=01,00,00,7F,7F RumbleDataOff=01,00,00,00,00 RumbleTransferLen=05 RumbleTransfers=1

Post automatically merged: Apr 25, 2024

Ah, thanks for the info.

So finally, the problem is not my end. ^^

The code for reading the .ini file from the USB port is already implemented, but it seems there's a bug with it.

If xjsxjs197 read this, maybe he will fix it easily.

If you want to use it only with USB you can simply replace SD with USB in the source code and compile your own dol

 

[BoozUchiha]

This ini should work:
[PS2 Controller For WiiStation] VID=0E8F PID=0031 Polltype=1 DPAD=1 DigitalLR=1 MultiIn=1 MultiInValue=01 KeyA=5,80 KeyB=5,40 KeyX=5,20 KeyY=5,10 KeyL1=6,04 KeyR1=6,08 KeyL2=6,01 KeyR2=6,02 KeyStart=6,20 KeySelect=6,10 KeyLeft=5,06 KeyDown=5,04 KeyRight=5,02 KeyUp=5,00 RightUp=5,01 DownRight=5,03 DownLeft=5,05 UpLeft=5,07 StickX=3,1A,100 StickY=4,1A,100 CStickX=2,1A,100 CStickY=1,1A,100 LAnalog=0 RAnalog=0 Rumble=1 RumbleType=0 RumbleDataLen=05 RumbleDataOn=01,00,00,7F,7F RumbleDataOff=01,00,00,00,00 RumbleTransferLen=05 RumbleTransfers=1

Post automatically merged: Apr 25, 2024

If you want to use it only with USB you can simply replace SD with USB in the source code and compile your own dol

Okay friend I'll try this ini file to see how it goes :3

Post automatically merged: Apr 25, 2024

This ini should work:
[PS2 Controller For WiiStation] VID=0E8F PID=0031 Polltype=1 DPAD=1 DigitalLR=1 MultiIn=1 MultiInValue=01 KeyA=5,80 KeyB=5,40 KeyX=5,20 KeyY=5,10 KeyL1=6,04 KeyR1=6,08 KeyL2=6,01 KeyR2=6,02 KeyStart=6,20 KeySelect=6,10 KeyLeft=5,06 KeyDown=5,04 KeyRight=5,02 KeyUp=5,00 RightUp=5,01 DownRight=5,03 DownLeft=5,05 UpLeft=5,07 StickX=3,1A,100 StickY=4,1A,100 CStickX=2,1A,100 CStickY=1,1A,100 LAnalog=0 RAnalog=0 Rumble=1 RumbleType=0 RumbleDataLen=05 RumbleDataOn=01,00,00,7F,7F RumbleDataOff=01,00,00,00,00 RumbleTransferLen=05 RumbleTransfers=1

Post automatically merged: Apr 25, 2024

If you want to use it only with USB you can simply replace SD with USB in the source code and compile your own dol

@takashiii my friend the .ini file that you sent me here on the forum worked for me, thanks to you and all of you I can play perfectly with my PS2 controller and my Gamecube controller in Wiistation ^^ I'm super happy and very hopeful that they will continue improving the emulator even more, keep working well <3 @xjsxjs197 I would like to ask you to try Spanish PAL games with enable force NTSC since they have aspect ratio and fonts problems, the revision 17 of the wiistation emulator carried out by @Jokippo perfectly solved all these aspect ratio problems It would be interesting if you took a look at the code so you can see how he was able to solve all the aspect ratio problems when the force NTSC option is activated ^^ Without further ado, I send you all a hug and greetings from my beautiful country Venezuela :3

 

[takashiii]

Okay friend I'll try this ini file to see how it goes :3

Post automatically merged: Apr 25, 2024

@takashiii my friend the .ini file that you sent me here on the forum worked for me, thanks to you and all of you I can play perfectly with my PS2 controller and my Gamecube controller in Wiistation ^^ I'm super happy and very hopeful that they will continue improving the emulator even more, keep working well <3 @xjsxjs197 I would like to ask you to try Spanish PAL games with enable force NTSC since they have aspect ratio and fonts problems, the revision 17 of the wiistation emulator carried out by @Jokippo perfectly solved all these aspect ratio problems It would be interesting if you took a look at the code so you can see how he was able to solve all the aspect ratio problems when the force NTSC option is activated ^^ Without further ado, I send you all a hug and greetings from my beautiful country Venezuela :3

Glad it worked for you, have fun.

 

[spielvan]

@takashiii All right, could you send me the wiisxrx data folder, already with the controllers folder so I can test, I tested it with my controllers that I use on my Nintendo and it didn't work, the ps3 control even fixes the red LED but The buttons don't work, but the same PS3 controller on Nintendo with the ini file works normally.

 

[GustavoReis]

Hi @SaulFabre
Can you compile new changes?
Thank's

 

[SaulFabre]

Latest WiiStation build until git 8e34107
https://github.com/xjsxjs197/WiiSXRX_2022/commit/8e341079e861a2d299be6b4a158bb6a41b5118a3

What's new:

• Update GNU Lightning until latest of 28/04/2024
• Update to latest changes from upstream PCSX-ReARMed until git 87a0a63.
• revert controller in autoboot changes. caused some issues.
• attempt to improve speed in CTR: Crash Team Racing, by adding that game to the cycle multiplier override database in 200 (instead of default 175). Suggested by @Zorg07 and helped by @xjsxjs197.
• Update Chinese translation.
• Some more HID controller handling updates.
• some more other things and updates...

Please test this game, thanks!

 

[spielvan]

Finally, I managed to make the PS3 controller work on the Wiistation, it only works via sdcard, it doesn't work via USB, what happened, I was using the Nintendo controllers folder and the nomenclature was different from the Wiistation, now it's perfect, I'll leave it here Complete, just play.

 

[Amuro-san]

Latest WiiStation build until git 8e34107
https://github.com/xjsxjs197/WiiSXRX_2022/commit/8e341079e861a2d299be6b4a158bb6a41b5118a3

What's new:

• Update GNU Lightning until latest of 28/04/2024
• Update to latest changes from upstream PCSX-ReARMed until git 87a0a63.
• revert controller in autoboot changes. caused some issues.
• attempt to improve speed in CTR: Crash Team Racing, by adding that game to the cycle multiplier override database in 200 (instead of default 175). Suggested by @Zorg07 and helped by @xjsxjs197.
• Update Chinese translation.
• Some more HID controller handling updates.
• some more other things and updates...

Please test this game, thanks!

The problem I mentioned about forcing 60Hz persists, so I went back to version 3.1, where it doesn't occur

 

[SaulFabre]

Latest WiiStation until git ffcc801
https://github.com/xjsxjs197/WiiSXRX_2022/commit/ffcc80183ca0aedf4b4bec5259018ced4d0cd0c3

Latest change is always prioritize initializing USB.
What does this mean? Because it is necessary to read the HID INI (.ini) configuration file of the USB, it is always necessary to initialize the USB.
Maybe this fixes the issues of HID controllers that cannot be used if we're loading WiiStation from USB?

Please test this, thanks!

 

[Ouaz]

What does this mean? Because it is necessary to read the HID INI (.ini) configuration file of the USB, it is always necessary to initialize the USB.
Maybe this fixes the issues of HID controllers that cannot be used if we're loading WiiStation from USB?

Wow, thank you (and xjsxjs197 too), I hope it will work!

I'll test this ASAP.

 

[GustavoReis]

I tested two tracks in Crash team racing (crash cove and roo's tube) and so far it has worked without slowdowns

 

[MeXen]

Tested it, and sorry to say but the frame stutter has gotten worse, it aint no longer just a micro stutter.