GuliKit KK3 MAX NS39 V3.3 Firmware
Changelog
- Refined the trigger mechanism to enable faster and more accurate triggering in digital trigger mode.
- Fixed the problem where the controller would enter APG sharing mode when power on if the USB cable was not disconnected after flashing the firmware on XINPUT mode.
- Fixed the problem where the controller would have USB cable disconnected on XINPUT wired mode when setting the joystick star-ring lighting mode.
Upgrade Method:
- With the controller powered off, connect it to the computer using the provided USB cable.
- Press and hold the APG button(double-square icon button) on the controller, then press A button to power it on. A "GuliKit" USB drive will appear on the computer.
- After extracting the downloaded upgrade firmware file, copy the corresponding "***.bin" file to the root directory of the USB drive.
After a few seconds, the upgrade will be completed, and the controller will automatically power off.
The USB drive will disappear from the computer, indicating that the upgrade is finished.
Note: The controller will automatically power off after the upgrade is completed. Do not unplug the USB cable before that.
If you do not need to upgrade, you can long-press the Mode button to turn off the controller and then press the Mode button again to power it on to exit the upgrade mode and resume normal operation.
After the upgrade is completed, it is recommended to calibrate the joysticks on the controller. With the controller powered on, simultaneously press and hold the "L, R, D-pad Left, and A" buttons for 6 seconds.
Then fully move the left and right joysticks in complete circles for several times. The controller will vibrate once to indicate that calibration is complete.