Get the latest version from here.How do I update usb loader gx if I use an installed channel and have an autoforwarder on boot up?
Just don't want to mess it up, but want to use the new deflicker options.
Hope it's not the below (have a read & compare with your issues) :Then I placed the Wii in storage for several months and only recently pulled it back out and fired it up, only to find that all WADs that had previously worked now crash the Wii, all in the exact same way
Please post a syscheckTried searching for answers, but can't seem to find anything that answers properly... I modded my Wii a while back and managed to successfully add some WADs that worked fine. Then I placed the Wii in storage for several months and only recently pulled it back out and fired it up, only to find that all WADs that had previously worked now crash the Wii, all in the exact same way. Frankly, I don't know what diagnostic steps to take as most mention bad WADs or a error in the cIOS, but I don't think those are my issues. Maybe the cIOS, but I don't know how to determine that.
Any advice is greatly appreciated.
SysCheck ME v2.5.0 by blackb0x, JoostinOnline, Double_A, R2-D2199 and Nano ...runs on IOS58 (rev 6176). Region: NTSC-U (original region: JAP) System Menu 4.3U (v513) Priiloader installed Drive date: 07.14.2008 Homebrew Channel 1.1.2 running on IOS58 Hollywood v0x21 Console ID: 90532388 Console Type: Wii Shop Channel Country: United States (49) Boot2 v4 Found 101 titles. Found 49 IOS on this console. 7 of them are stubs. IOS3 (rev 404): Stub IOS4 (rev 404): Stub IOS9 (rev 1034): No Patches IOS10 (rev 404): Stub IOS11[60] (rev 65535, Info: ModMii-IOS60-v6174): Trucha Bug, NAND Access IOS12 (rev 526): No Patches IOS13 (rev 1032): No Patches IOS14 (rev 1032): No Patches IOS15 (rev 1032): No Patches IOS16 (rev 404): Stub IOS17 (rev 1032): No Patches IOS20[60] (rev 65535, Info: ModMii-IOS60-v6174): Trucha Bug, NAND Access IOS21 (rev 1039): No Patches IOS22 (rev 1294): No Patches IOS28 (rev 1807): No Patches IOS30[60] (rev 65535, Info: ModMii-IOS60-v6174): Trucha Bug, NAND Access IOS31 (rev 3608): No Patches IOS33 (rev 3608): No Patches IOS34 (rev 3608): No Patches IOS35 (rev 3608): No Patches IOS36 (rev 3608): No Patches IOS37 (rev 5663): No Patches IOS38 (rev 4124): No Patches IOS40[60] (rev 65535, Info: ModMii-IOS60-v6174): Trucha Bug, NAND Access IOS41 (rev 3607): No Patches IOS43 (rev 3607): No Patches IOS45 (rev 3607): No Patches IOS46 (rev 3607): No Patches IOS48 (rev 4124): No Patches IOS50[60] (rev 65535, Info: ModMii-IOS60-v6174): Trucha Bug, NAND Access IOS51 (rev 404): Stub IOS52[60] (rev 65535, Info: ModMii-IOS60-v6174): Trucha Bug, NAND Access IOS53 (rev 5663): No Patches IOS55 (rev 5663): No Patches IOS56 (rev 5662): No Patches IOS57 (rev 5919): No Patches IOS58 (rev 6176): USB 2.0 IOS60 (rev 65535, Info: ModMii-IOS60-v6174): Trucha Bug, NAND Access IOS61 (rev 5662): No Patches IOS62 (rev 6430): No Patches IOS70[60] (rev 65535, Info: ModMii-IOS60-v6174): Trucha Bug, NAND Access IOS80[60] (rev 65535, Info: ModMii-IOS60-v6174): Trucha Bug, NAND Access IOS222 (rev 404): Stub IOS223 (rev 404): Stub IOS248[38] (rev 21011, Info: d2x-v11beta1): Trucha Bug, ES Identify, NAND Access IOS249[56] (rev 21011, Info: d2x-v11beta1): Trucha Bug, NAND Access, USB 2.0 IOS250[57] (rev 21011, Info: d2x-v11beta1): Trucha Bug, NAND Access, USB 2.0 IOS251[38] (rev 21011, Info: d2x-v11beta1): Trucha Bug, ES Identify, NAND Access IOS254 (rev 65281): BootMii BC v6 MIOS v10 Report generated on 01/14/2024.
Please note that not all games are compatible with Emunand, both WiiWare and VC titles, so do your research.Please, help. I want to have a library of Wiiware games on the SD card.
When you start emunand games or?I turn on emunand in the usbloader, make a dump nand, install the games. But when I start it, it throws me into the system menu.
For clarification, Sneek is sd emunand, and Uneek is usb/ext hdd. I'd recommend the latter (for loading speed, reducing wear & tear on the sd card reader etc).I tried Sneek and the Wiiware worked!
But I have an external HDD drive with WII games (WBFS) and an SD card with Gamecube games and I used a usbloaderGX...
Install what? Sneek? I thought you already had it working? Wii/GC games? You don't need to install them as they should appear/work on both Sneek/Uneek emunand and sysnand.How can I install it now?
So you know GC games don't work with NTFS formatted drives, only Fat32.Format the HDD disk in NTFS?
You should request this feature in the official USB loader gx thread I want this option too.Hey, I'm sorry if this is a silly question, but I'd like to know: is there a way to have USB Loader GX automatically load the GameCube memory cards if they're inserted but use a virtual memory card if the physical GameCube memory card slots are empty?
I'd like to have the option for both without having to manually turn memory card emulation on and off for individual games or between individual gaming sessions. It seems like it would just be easier to remove the memory cards if I don't want to use them but that doesn't seem to be an option in the USB Loader GX GameCube settings. The only options are "On (Multi)", "Individual", and "Off".
Here is my SysCheck:Please post a syscheck
Looks fine. Though you have to update your cIOSs, to do that, drag and drop this syscheck onto , and it'll tell you what to do.
Or follow the guide.
If you're talking about usbloadergx, just download it from the link i posted above, and copy/paste in sd:/apps folder.When I check my SD card I only see this.
Is it possible the program is located somewhere else?
Usbloadergx? No. Only the channel forwarder, which doesn't contain any data other than to redirect you to usbloadergx etc.Or installed on the wii memory?
This shouldn't be an issue, usbloadergx should work from your sd card.Or using my external drive directly in some way???
This one is the forwarder, if you have it installed it should appear in the Wii's home menu, otherwise you don't have it installed.EDIT: I also found this old wad of the forwarder I'm using: "USB Loader GX-UNEO_Forwarder_5_1_AHBPROT"
Looks like a forwarder, but might not work with the latest version i linked above.and this one "USBLoaderGX_v3.0_IOS249.wad".
Figured it out. USB loader gx files needed to go on my external HDD and not on my SD.If you're talking about usbloadergx, just download it from the link i posted above, and copy/paste in sd:/apps folder.
Usbloadergx? No. Only the channel forwarder, which doesn't contain any data other than to redirect you to usbloadergx etc.
This shouldn't be an issue, usbloadergx should work from your sd card.
This one is the forwarder, if you have it installed it should appear in the Wii's home menu, otherwise you don't have it installed.
Looks like a forwarder, but might not work with the latest version i linked above.
This is pretty straightforward, i don't think i can make it any simpler than it already is.