Tutorial
Updated
PSVita MacBook Pro speakers sound MOD by Simonius007
Guys, I want to share with you what I accomplished today and so far very satisfied.
1. You need 2 speakers and woofer from MacBook Pro 13 2010 (other model may feet as well)
After research I can confirm that any speakers with 4-8 ohm resistance will work.
So basically everything what can fit inside with mentioned above resistance will work.
2. Solder everything as it shown on the pictures (left side, counting from top +/-, right side mirroring -/+)
3. Don't expect miracle from default PSV default audio amplifier.
I did my research installing custom audio amplifier
And that was something!!! Power of sound stronger minimum 2 times and the quality much higher. But not easy to DIY for everyone
But still possible!!
If you are interested?? - I can explain How-To
Best possible way with original audio amplifier
But this will be MONO, cause to connect WOOFER without separate channel you need to take "-" from one channel and "+" from other one. Witch will close the loop and cancel STEREO affect.
But if you remove one MacBooks speaker and connect woofer instead you will have stereo affect.
In this case it will look for example:
Left side original PSV speaker + MacBooks speaker
Right side original PSV speaker + MacBooks Woofer
Follow pictures and enjoy
Last edited by Simonius007,