Big Thankyou to c0z for update and continued support!
Overview - what it does
================================================================================
- It will launch a XeX or CON file from the path you specified in launch.ini
as long as it's valid
- Depending on the button you hold when the xbox is trying to load the NXE, it
will divert to the xex/con tied to that button or return to default as
defined in launch.ini
- At boot time it is possible to subvert default item and/or NXE loading, but
you must wait until the controller syncs to do so
- Depending which button is held when closing miniblade in NXE (use Y button to
close, release then hold a QL button) it will quick launch a CON or XEX
from your ini file
- allows one to patch kernel/xam at bootup with a freeBOOT patch style bin file
from usb or hdd (in that order) must be in root of the device and be named
"kxam.patch" and be no larger than 0x4000 bytes. Again, kxam.patch binary
format is the same as a compiled freeboot patch bin, but uses real virtual
addresses rather than offsets - as of 2.22 the first 32bit value must instead
be the version of the kernel the patches apply to
- with the included patch set, launch.xex acts as a helper to detect when
xbox1 emulator loads, allowing memory unlock patch and xbox1 emulator
to function together
================================================================================
Installation
================================================================================
- have the required hacked kernel version installed on the console
- get the installer to a place where you can run it, and do so. Follow onscreen
instructions if any. The installer will prompt you if it needs to update the
kernel/hv patches and will give you an opportunity to configure stuff.
- edit the options, and dont forget to save them somewhere if you want them to
be applied next boot. Don't forget to set configapp to the installer, so
you can go to it any time via miniblades' system settings (hold RB to go to
real system settings)
- the back button is your friend if you are wondering what button to push
Overview - what it does
================================================================================
- It will launch a XeX or CON file from the path you specified in launch.ini
as long as it's valid
- Depending on the button you hold when the xbox is trying to load the NXE, it
will divert to the xex/con tied to that button or return to default as
defined in launch.ini
- At boot time it is possible to subvert default item and/or NXE loading, but
you must wait until the controller syncs to do so
- Depending which button is held when closing miniblade in NXE (use Y button to
close, release then hold a QL button) it will quick launch a CON or XEX
from your ini file
- allows one to patch kernel/xam at bootup with a freeBOOT patch style bin file
from usb or hdd (in that order) must be in root of the device and be named
"kxam.patch" and be no larger than 0x4000 bytes. Again, kxam.patch binary
format is the same as a compiled freeboot patch bin, but uses real virtual
addresses rather than offsets - as of 2.22 the first 32bit value must instead
be the version of the kernel the patches apply to
- with the included patch set, launch.xex acts as a helper to detect when
xbox1 emulator loads, allowing memory unlock patch and xbox1 emulator
to function together
================================================================================
Installation
================================================================================
- have the required hacked kernel version installed on the console
- get the installer to a place where you can run it, and do so. Follow onscreen
instructions if any. The installer will prompt you if it needs to update the
kernel/hv patches and will give you an opportunity to configure stuff.
- edit the options, and dont forget to save them somewhere if you want them to
be applied next boot. Don't forget to set configapp to the installer, so
you can go to it any time via miniblades' system settings (hold RB to go to
real system settings)
- the back button is your friend if you are wondering what button to push
- Change log
- V3.19 - add 17526
