well seems they dont sell and even the controller is out of stock so far ;(
yes, the PRO2 is out of stock, there is only one but no hall effect and the white one. sorry for me
Pro2 will be available soon.yes, the PRO2 is out of stock, there is only one but no hall effect and the white one. sorry for me
Production capacity is tight recently because 8BitDo is completely replacing the Hall joystick.
New Gulikit KK3 MAX Firmware released, as usual available on the official site and on the GBATemp downloads section:
https://gbatemp.net/download/gulikit-kk3-max-ns39-firmware.38417/
Hello Budies, the last April 30th Gullikit released a Firmware Upgrade for the KK3 Max NS39 Bluetooth Module.
A little update increasing the better Wireless transmission speed.
It's very easy to upgrade, as always you can download it from the official page https://gulikit.com/Download
And will be an history of them on the downloads section of GBATemp:
https://gbatemp.net/download/gulikit-kk3-max-ns39-bluetooth-module-firmware.38620/
Also, there is a new Controller Firmware 4.1:
https://gbatemp.net/download/gulikit-kk3-max-ns39-firmware.38417/updates
A little update increasing the better Wireless transmission speed.
It's very easy to upgrade, as always you can download it from the official page https://gulikit.com/Download
And will be an history of them on the downloads section of GBATemp:
https://gbatemp.net/download/gulikit-kk3-max-ns39-bluetooth-module-firmware.38620/
Post automatically merged:
Also, there is a new Controller Firmware 4.1:
https://gbatemp.net/download/gulikit-kk3-max-ns39-firmware.38417/updates
Last edited by impeeza,
Fir me has been super easy and the twizers do not damage the buttons at all.Hi!
On the King Kong 3. Is it easier to swap the buttons? I just did it on my KK2 and man that tool scratched the buttons bad. Because the controller hold down the buttons in its housing like it had threadlocker go on it. (The tool is metal and the buttons are plastic
I apparently have missed the CPU update. The controller even died so hard trying to get it in to the right mode I had to reset it x3
Opsi!
The tweezers of KK2 and KK3 are different. It is really difficult to replace the buttons of KK2 and it is easy to damage them.On the King Kong 3. Is it easier to swap the buttons? I just did it on my KK2 and man that tool scratched the buttons bad. Because the controller hold down the buttons in its housing like it had threadlocker go on it. (The tool is metal and the buttons are plastic
Hello there @AKNES sorry for botter, could you please ask to Gulikit if there is any plan to add to KK3 (and others) the original Nintendo Switch Pro Controller indicator light:
That indicator light is under used on the console but some home-brew uses frequently. By example, the FTPdaemon for Switch tells you when communication is established and when the demon start and stop via that indicator.
That indicator light is under used on the console but some home-brew uses frequently. By example, the FTPdaemon for Switch tells you when communication is established and when the demon start and stop via that indicator.
Figured out the issue. Seems the KingKong2 Pro HATES my laptops Bluetooth. Hell even the Xbox One (controller) hates it as well
I tried an old external USB dongle and its rock solid. So its as I think... Asus cheaped out.
EDIT: Playing for some hours and suddenly its stuck in a rumble mode. Like it connects and disconnects. Resetted it and everything... This quality is really piss poor for a almost 100$ controller. Reflashing doesn't help. Only resetting it with the
button on the back helps.
EDIT2: Seems I'm not alone -
I tried an old external USB dongle and its rock solid. So its as I think... Asus cheaped out.
EDIT: Playing for some hours and suddenly its stuck in a rumble mode. Like it connects and disconnects. Resetted it and everything... This quality is really piss poor for a almost 100$ controller. Reflashing doesn't help. Only resetting it with the
button on the back helps.
EDIT2: Seems I'm not alone -
Last edited by linuxares,
It is difficult for a third-party controller to perfectly match with another third-party adapterFigured out the issue. Seems the KingKong2 Pro HATES my laptops Bluetooth. Hell even the Xbox One (controller) hates it as well
I tried an old external USB dongle and its rock solid. So its as I think... Asus cheaped out.
EDIT: Playing for some hours and suddenly its stuck in a rumble mode. Like it connects and disconnects. Resetted it and everything... This quality is really piss poor for a almost 100$ controller. Reflashing doesn't help. Only resetting it with the
button on the back helps.
EDIT2: Seems I'm not alone -
For sure, sadly it seems like my kk2 isn't even working with its usb-c cable either, so I guess the firmware isn't feeling to well.
Similar threads
- S salazarcosplay
-
Xdqwerty
what are you looking at?
-
-
-
-
-
-
-
-
-
-
-
-
@
Xdqwerty:
@salazarcosplay, if you ask how am I, well... aside from the fact that i cant stop thinking about killing myself i guess im fine, and my throat got better
-
-
S @ salazarcosplay:I was thinking about what to comment in your picture , that is why i didn't
say hello directly to you right away -
-
-
-
-
-
S @ salazarcosplay:I sorry to hear, when I don't feel well myself I come to this forum, I have you all the ones whom I most consistently communicate from time to time+1
-
-
-
-
-
