It doesn't matter if I type it or use the qr code. I'm pretty sure it is going to the correct url, it just won't work correctly.
It doesn't matter if I type it or use the qr code. I'm pretty sure it is going to the correct url, it just won't work correctly.
I've got a special edition N3DS (not the XL) with pre-installed games. It's on 10.2.0-27U. I want to downgrade to 9.2.*
So far I've used browserhax to install menuhax, and tried sysupdater with both 9.0.0-20U_n3DS and 9.2.0-20U_n3DS and I get the same error everytime:
I've even tried using sysupdater as my boot.3dsx as I heard some people have had success doing that, no dice. My next step is to try system format, but I'm worried I'll lose my pre-installed games. Looking for answers or suggestions please.
So far I've used browserhax to install menuhax, and tried sysupdater with both 9.0.0-20U_n3DS and 9.2.0-20U_n3DS and I get the same error everytime:
Code:
title exception: main.cpp:148 Result: 0xD900182F failed to get CIA file infoI've even tried using sysupdater as my boot.3dsx as I heard some people have had success doing that, no dice. My next step is to try system format, but I'm worried I'll lose my pre-installed games. Looking for answers or suggestions please.
Last edited by jakerman999,
Before any further step I would backup my whole SD cart, so if you don't update your Firmware you can mostly restore every file you have, also the pre installed Games, but I think the safegames from the downloaded games will be vanished, but I didn't know, only work with all this stuff since one day.
A good tutorial for your purposes should be this:
http://wololo.net/2016/01/04/3ds-system-software-downgrade-tutorial/
explained very well and really up2date
I managed to do it with the latest version of Decrypt9WIP. Once decrypted, you can use "makerom -ciatocci file.cia" and "ctrtool -p --exefs=exefs.bin --romfs=romfs.bin --exheader=exheader.bin file.cci"
- Joined
- Jan 11, 2016
- Messages
- 6,032
- Trophies
- 1
- Age
- 24
- Location
- 日本
- Website
- www.facebook.com
- XP
- 3,234
- Country
Hi guys I have 2 questions:
1) I'm trying to move from smaller 32gb micro SD to 128gb. I followed the guides on here, but then for the new 128gb card it doesn't boot into my Rxtools 9.5, but into Sysnand. If I go into homebrew menu from there it load Rxtools (gives that purple screen) and then can work. But not from cold boot.
2) Could someone please give me easy explanation how I can play games online. Do I need Reinand? How can I copy it over Rxtools? I didn't look on here for some time and now it's a bit confusing. Thanks.
1) I'm trying to move from smaller 32gb micro SD to 128gb. I followed the guides on here, but then for the new 128gb card it doesn't boot into my Rxtools 9.5, but into Sysnand. If I go into homebrew menu from there it load Rxtools (gives that purple screen) and then can work. But not from cold boot.
2) Could someone please give me easy explanation how I can play games online. Do I need Reinand? How can I copy it over Rxtools? I didn't look on here for some time and now it's a bit confusing. Thanks.
You're probably best off updating to 9.2 but for 4.x I believe rxtools and pasta are the best
P
PaiiNSteven
Guest
Firmware.bin: Generate it again using the latest rxTools nightly. I believe the python script works still.
"It is also telling me to download another release for o3DS, my device, another rxtools folder.": Just get another nightly from the lavanoid website. Theres a lot, I can edit this comment with the one im using if I can find it.
"It is telling me to download rxtools and then put it onto my sd, but wont that replace my existing rxtools folder?": Basically yes, if its not working on your 3DS. You need to find another nightly release, because some of them wont work. It's happened before.
Sorry, your post was kind of confusing to read. Any questions and I can help you out.
--------------------- MERGED ---------------------------
Call me stupid, but what exactly does the A9LH.3dsx actually do? For someone who just spend two hours doing this I dont know what I got out of it haha.
I'm trying to get my console's OTP. I reached step 2 of this guide https://github.com/Plailect/OTP/blob/master/Old_3DS_Spider.md , which mentions I should format emunand. Been there, done that.
My issue is that, now that emunand is formatted, my cia manager is gone, and I have no way of installing a new one (I planned on using FBI.3dsx through browserhax but that's dead on 10.6). Without a cia manager on Emunand I can't install sysupdater which will allow me to go all the way back to 2.1. So what are my options? Should I just say screw it and make a brand new emunand? Or is there a faster way to get a cia installer on 10.6 emunand? Keep in mind that I'm not using rxTools so I don't think I have a way of injecting FBI to Health and Safety.
My issue is that, now that emunand is formatted, my cia manager is gone, and I have no way of installing a new one (I planned on using FBI.3dsx through browserhax but that's dead on 10.6). Without a cia manager on Emunand I can't install sysupdater which will allow me to go all the way back to 2.1. So what are my options? Should I just say screw it and make a brand new emunand? Or is there a faster way to get a cia installer on 10.6 emunand? Keep in mind that I'm not using rxTools so I don't think I have a way of injecting FBI to Health and Safety.
Not sure if this is the right place to ask.
My save data for Pokemon Red corrupted after fixing Pokemon Blue through the eshop so I decided to delete red through data management (everything is on emuNAND btw) and then install a non cryptofixed version of the legit cia as precaution for the future.
Interestingly, when trying to do this using FBI or the e-shop, it fails at 70% every time, tried with a different game and it installed just fine. Now granted I don't really understand the full workings of the system but if I were to guess, I'm assuming the red I had installed previously wasn't properly deleted and is thus causing problems.
Is there a way to properly clear this up and a better way to go about removing installed cias?
My save data for Pokemon Red corrupted after fixing Pokemon Blue through the eshop so I decided to delete red through data management (everything is on emuNAND btw) and then install a non cryptofixed version of the legit cia as precaution for the future.
Interestingly, when trying to do this using FBI or the e-shop, it fails at 70% every time, tried with a different game and it installed just fine. Now granted I don't really understand the full workings of the system but if I were to guess, I'm assuming the red I had installed previously wasn't properly deleted and is thus causing problems.
Is there a way to properly clear this up and a better way to go about removing installed cias?
I have a N3DS, downgraded and running 9.2. I want to be able to play cartridge copy of Pokemon ORAS with online enabled, however want to still access homebrew so I don't want to bite the bullet and update my N3DS. Is it also possible to run backups on 3DS via CFW at all yet? I've been out of the loop for a while. Thanks!
Yup, you can run backups via CFW now; the functionality for running unsigned cias via CFW was released almost a year ago.
A tutorial to set up CFW/emuNAND on the N3DS can be found here.
Similar threads
-
BigOnYa
-
Xdqwerty
what are you looking at? -
Psionic Roshambo
-
AncientBoi
-
-
-
-
@
BigOnYa:
If your internet speeds are fast enough. Streaming 4k takes alot. I used to only have 20mb sec, and 4k struggled. Now I have 300mb sec and 4k plays fine.+1
-
-
-
-
-
-
-
@
Psionic Roshambo:
I think Game streaming should work like this.... Local Hardware able the run the game fine, game engine and common assets stored locally, all FMV and music and textures could be streaming+1
-
-
@
Xdqwerty:
also @BigOnYa im making some progress on my gdevelop project, implemented various mechanics
-
-
@
BigOnYa:
Or free government supplied high speed internet be nice also. Like Obama care. Xdqwerty that's cool, its time consuming but rewarding once done or playable, to see what you've made from scratch. Animations take forever, but worth it.+1
-
-
-
@
Xdqwerty:
@BigOnYa,+1
and the visual aspect of the game is quite crude (the sprite that looks best is that of the protagonist just because he is a stickman with sunglasses) -
@
BigOnYa:
There is a bullets behaviour you assign to your character, that makes the code easier, under "behaviours"
-
-
@
Xdqwerty:
i meant that when the character is pointing to the right, the bullets spawn where they should, but when he is on the right, they move to the right but the spawn point is incorrect
-
@
BigOnYa:
Itch.io has lots of free assets also. Under the bullets behavior tab, there is a "rotate bullets" option, can try that. Or in the code can try
- fire bullet Player.X(PlayerDirection) -
-
-
@
BigOnYa:
That's cool tho, I'm proud of you going back to it, not giving up. It is difficult at first to learn, but fun once you get the hang of it. I think I've watched every tutorial video there is, but I still struggle sometimes to get stuff to work right. But gotta keep trying dif things, and eventually you will get it right.+1
them