Marcel100 said:It doesn't work on my EZV v.1 :/ Even after I've done downgrade to 1.70.
Did you make the ini file?
Marcel100 said:It doesn't work on my EZV v.1 :/ Even after I've done downgrade to 1.70.
Onelouder said:SamusKnight2K said:Unfortunately I'm having no luck getting this thing to work... Even if I'm using an SCDS1.
Specs:
SCDS1 (SDHC) (SuperCard DS ONE(SDHC) OS 3.0 SP5 Firmware)
Kingston 2GB SD Card (JAPAN)
Nintendo DS Lite (Black/Red)
GTA CTW (Clean, Untrimmed)
SD Speed set to custom speed 25
Using the above and with all boxes unticked (I mean every box, I even made sure to untick any greyed out font boxes.) the game just hangs at a black screen above, white screen below. If I tick:
"Enable DMA" (Can check it, even if the option's greyed out.)
I still get the black screen above, white screen below. If I tick in "Enable Patch" it still yields the same results. But if I do:
"Enable Patch"
"Patch Speed"
"Enable DMA"
The game loads, gets to the save select screen, then ultimately hangs at a black screen after selecting it. Even turning off "Enable DMA" and leaving "Patch Speed" yields the same results. Using a program called Rominator I DID comfirm the CRC on the rom file is correct.
I have done as another post recommended and set the save types to both 64KB AND 1MB with the 1MB setting just resulting in a black screen upon rom load. I even made CERTAIN my firmware was up-to-date by downloading then re-installing it. I'm at a complete loss here why it's failing to work...
I just tried it again with a new BLANK sdhc card, loaded with brand new firmware sp5, and the XPA rom. I had NOTHING checked, no custom speed, no boxes checked, NOTHING ENABLED, the game loaded, I chose YES for autosave at the first screen, and then boom, the Jet cutscene started. Dunno what you did, but it can't get simpler than that.
arnt we alldsttuser said:sorryComplicatioN said:stop asking and waitdsttuser said:ahh! does anyone know how to run this on a dstt?im too excited for this game
cornaljoe said:Taker2 said:i have EZV v1(kenrel1.70) and EZV+(kernel 1.90B9) and i can't play with it
i don't understand.
because i have see here that he work with EZVv1
You have to enable clean mode by making an "game name.ini" file. The contents of the ini file was in my original post way back. Also make sure you delete the old save first.
elixirdream said:cornaljoe,
Thanks for the details! we need that.. it just get lost ASAP
anyway, GTA doesn't work on ak2i, ak2, dstt, m3real, r4 ... and anything else?
elixirdream said:cornaljoe,
Thanks for the details! we need that.. it just get lost ASAP
anyway, GTA doesn't work on ak2i, ak2, dstt, m3real, r4 ... and anything else?