Hey! So I have a patched V1 here that wasn't booting at all after a mod attempt (it was stuck in RCM mode according to TegraRcmGUI). I successfully installed a modchip, and I can now boot into Hekate.
The console still won't boot into OFW if I go into Reboot > OFW in Hekate, it just gives a black screen (still stuck in RCM mode). Same if I hold vol +/- and then power from the off state, or if I remove the SD and press vol +/- on the NO SD screen. All straight to RCM mode.
But interestingly enough, the console will boot completely fine using certain options from the "Launch" menu in Hekate:
Here's a screenshot of the emuMMC boot error:
And the HW & Fuses screen:
The SysMMC is on the FW version 17.0.1
I would assume it's an issue with the fuse count, but the console has never been sucessfully modded or downgraded as far as I know. And this wouldn't cause issues with booting into the emuMMC, right? I even tried re-formatting the SD, re-partitioning, and re-creating the emuMMC but I get the same exact "Unknown pkg1 version" error.
I would try performing an unbrick level 1, but I'm worried this is unecessary if the console can boot completely fine into OFW from the Hekate Launch menu.
I have both a NAND backup and prod.keys dumped. Happy to provide any other details/screenshots I can. Any help is greatly appreciated!!
Oh and I forgot to mention, AutoRCM is off in Hekate.
Update: the EmuMMC boot issues were completely unrelated to the SysMMC boot issues. I tried a different SD card for the EmuMMC, and that seemed to fix that issue. Turns out the SD card that was provided with the console was a generic brand/fake SD card.
(I thought the EmuMMC creation & NAND backups were a little slower than usual! )
However, I'm unfortunately still running into issues with the stock OFW boot.
I was also having issues with the switch not waking from sleep, it would just get stuck on a black screen when attempting to wake from sleep in both the SysMMC and EmuMMC.
But I fixed both issues!! For anyone else running into similar issues, I reinstalled the same firmware (17.0.1 in my case) using Daybreak on SysMMC + CFW and that fixed it. I'm guessing something on the SysMMC somehow got corrupted at some point during the initial mod attempt, and re-installing the same firmware resolved it.
The console still won't boot into OFW if I go into Reboot > OFW in Hekate, it just gives a black screen (still stuck in RCM mode). Same if I hold vol +/- and then power from the off state, or if I remove the SD and press vol +/- on the NO SD screen. All straight to RCM mode.
But interestingly enough, the console will boot completely fine using certain options from the "Launch" menu in Hekate:
- SysMMC OFW - Succeeds (I believe this skips the fuse count, does it skip anything else?)
- SysMMC CFW - Succeeds
- emuMMC CFW - Fails (for whatever reason with the "Unknown pkg1 version" error)
Here's a screenshot of the emuMMC boot error:
And the HW & Fuses screen:
The SysMMC is on the FW version 17.0.1
I would assume it's an issue with the fuse count, but the console has never been sucessfully modded or downgraded as far as I know. And this wouldn't cause issues with booting into the emuMMC, right? I even tried re-formatting the SD, re-partitioning, and re-creating the emuMMC but I get the same exact "Unknown pkg1 version" error.
I would try performing an unbrick level 1, but I'm worried this is unecessary if the console can boot completely fine into OFW from the Hekate Launch menu.
I have both a NAND backup and prod.keys dumped. Happy to provide any other details/screenshots I can. Any help is greatly appreciated!!
Post automatically merged:
Oh and I forgot to mention, AutoRCM is off in Hekate.
Post automatically merged:
Update: the EmuMMC boot issues were completely unrelated to the SysMMC boot issues. I tried a different SD card for the EmuMMC, and that seemed to fix that issue. Turns out the SD card that was provided with the console was a generic brand/fake SD card.
(I thought the EmuMMC creation & NAND backups were a little slower than usual! )
However, I'm unfortunately still running into issues with the stock OFW boot.
Post automatically merged:
I was also having issues with the switch not waking from sleep, it would just get stuck on a black screen when attempting to wake from sleep in both the SysMMC and EmuMMC.
But I fixed both issues!! For anyone else running into similar issues, I reinstalled the same firmware (17.0.1 in my case) using Daybreak on SysMMC + CFW and that fixed it. I'm guessing something on the SysMMC somehow got corrupted at some point during the initial mod attempt, and re-installing the same firmware resolved it.
Last edited by zach__c,