problem with ntrboot

[Stan234]

hello
does anybody have a map of the insides of the new 3ds xl? im trying to put it to sleep mode with a magnet but i cant seem to find the right spot. also when its closed the screen is still on , could this mean the sensor is damaged and i cant do ntrboot? the 3ds is bricked with error code

bootrom:8046
errcode: 00f800ee
FFFFFFFF FFFFFFFF
0000000 0000000



also when i try to turn it of i takes like 20s which is pretty annoying while finding the magnet position

 

[Hayato213]

The Magnet are on the right side near the start and select button, so put the magnet on the right side. Depends on the type of brick unless you have a hard brick you should be able to recover with ntrboot.

 

[KleinesSinchen]

also when its closed the screen is still on , could this mean the sensor is damaged and i cant do ntrboot

That is expected. The bootrom error does not check for the sensor and never turns off the screens. If you get the error screen ntrboot was not successful.

Try Rebuilding NSCS Header

Spoiler

 

[Stan234]

what are the symptoms of a hard brick?

 

[Hayato213]

what are the symptoms of a hard brick?

MCU Brick is hard brick, an example of hard brick would be if someone did a hard mod to their 3ds and supply voltage to where the hard mod usb port is it would hard brick the 3ds.

 

[KleinesSinchen]

what are the symptoms of a hard brick?

The given error can be software caused (See the thread I linked above)
Try ntrboot into GodMode9 for an attempt to rebuild NSCD header.

In case this error occurred spontaneously there is a chance the NAND chip is damaged. In this case it will happen again, even if rebuilt is successful. Other problems might be present as well.
But… trying does no harm.

 

[Stan234]

yooo ntrboot worked but i have to do it every single time to boot into home menu and if i dont i get the same error as in the begining does anybody know how to fix this?

 

[KleinesSinchen]

yooo ntrboot worked but i have to do it every single time to boot into home menu and if i dont i get the same error as in the begining does anybody know how to fix this?

Did you rebuild the NSCD header with GodMode9?

in case that fails the NAND chip is probably done for.

 

[Stan234]

imma try it. do you have a image of a good nand, i changed 1 value of sysnand virtual hex like 2 years ago (don't ask why)

Post automatically merged: Feb 13, 2024

and btw how do i rebuild the nscd header?

Post automatically merged: Feb 13, 2024

nvm i see

Post automatically merged: Feb 13, 2024

sucesss!!!

Post automatically merged: Feb 13, 2024

nice it just works FINALLY AFTER 2 YEARS!!

Post automatically merged: Feb 13, 2024