PS5 EDM 020 TPM Issue

[FiXiNGA]

Hi,

I have a PS5 on my workbench with 2Sec Blod. All voltages look good, RAM and APU are getting warm for 1sek and then shutdown. I read out the errlog as you and only had those two problems:

80800014 TPM 2.0 chip / Power failure
808F0002 TPM 2.0 chip / Power failure
I swapped it with a donor and then got

8080001A

So it seems that TPM is married which makes sense cause the reason of this chip is encryption. But now I have no idea to fix this.

Best regards!
Andi

 

[antop095]

Ho, have you solved this error? I have the same error with a ps5

 

[FiXiNGA]

Ho, have you solved this error? I have the same error with a ps5

No sadly not yet.

Post automatically merged: Feb 17, 2024

You cannot use another TPM, the problem is rather with power going to YOUR TPM.

Good luck!

Okay. I measured around and got 3,3V as well through the PullUp voltage for the Enable line. So I cannot understand what is wrong. The Southbridge ist getting a signal from that TPM. Maybe there is an issue.

 

[jacobtc]

Hey, did you solve the issue? I too have the same errors on a PS5 with 1sec blod.

 

[FiXiNGA]

Hey, did you solve the issue? I too have the same errors on a PS5 with 1sec blod.

No not yet. It was soo time consumption that I stopped working on it.

At the end the SB was soldered and reballed 3-4 times by me and that was many work. It is a donor now.