Hardware PS5 HDMI missing components

[flabbaba]

Hi people,

I have a PS5 here, that went through a hell of a repair-attempt from someone watching too much Youtube and never held a soldering iron.

So to make it short, there are components missing....

I not have another board to compare with.

I changed the diode with one from a PS4 board. And I also took a random capacitor and put close to the HDMI-port, after someone in here just said that a PS4 was crowded with 0.1 uF capacitors.

But if we could identify all these, I will make two new photos with the values, so that the community have it for future reference.





F is not missing, but it would be nice to have the value there anyway.

Thanks for all help.

EDIT: Heres a picture of the underside:

The component in white is a mystery. No readings on my multimeter. No continuity. No Ohms. No readings in capacitor-mode (I can not go lower than a few nF) . The component was tested out of circuit. What can it be?

 

[jkyoho]

If last PICTURE IS referring A and B . I believe A diode is CDZ 5.6B Rohm zener diode. Then B should be 100nf capacitor

 

[flabbaba]

If last PICTURE IS referring A and B . I believe A diode is CDZ 5.6B Rohm zener diode. Then B should be 100nf capacitor

Yes, you are correct about the picture. Probably about the values too :-) Thank you so much. Highly appriciated!

 

[flabbaba]

Found out this: Its working perfectly. Had to do a special bridge for the diode that I got. Same specs as mentioned above but way too big (SOT-323).

 

[jkyoho]

IF theDZ2705600L is correct part#, it should be SOD723 but I think this part has been discontinued for long time, may need similar spec alternative.

 

[Nagaa]

I found this on aliexpress : https://fr.aliexpress.com/item/1005001360042980.html?
Is it gonna work for PS5 / PS4 ? because on mouser it's 20$ for shipping :/

And for the 100nF capacitor the size is 0402 ?

 

[jkyoho]

I found this on aliexpress : https://fr.aliexpress.com/item/1005001360042980.html?
Is it gonna work for PS5 / PS4 ? because on mouser it's 20$ for shipping :/

And for the 100nF capacitor the size is 0402 ?

The zener diode voltage spec is a bit low, try to get maybe this https://www.aliexpress.com/item/1005002634658701.html

and 100nF cap szie is 01005 (0402 Metric) 0.016" L x 0.008" W (0.40mm x 0.20mm)

 

[Nagaa]

The zener diode voltage spec is a bit low, try to get maybe this https://www.aliexpress.com/item/1005002634658701.html

and 100nF cap szie is 01005 (0402 Metric) 0.016" L x 0.008" W (0.40mm x 0.20mm)

Thanks i ordered it

 

[Publicpolicyadvocate]

Please fix that picture with the part numbers.

The original pin 13 diode wasn't a DZ2705600L. That was the "DJ" diode. The pin 13 diode was a DA2J101, but Sony is using a combination of "Nexperia BAS 316, 115" (A6 code) and some other general purpose fast-switching diode marked "C1" these days.

It would be great if someone had a part number for the 27kohm resistor too.

 

[jkyoho]

Please fix that picture with the part numbers.

The original pin 13 diode wasn't a DZ2705600L. That was the "DJ" diode. The pin 13 diode was a DA2J101, but Sony is using a combination of "Nexperia BAS 316, 115" (A6 code) and some other general purpose fast-switching diode marked "C1" these days.

It would be great if someone had a part number for the 27kohm resistor too.

27Kohm resistor size is 0402, parts number varies from brands you pick

 

[allservice1981]

Work with ordinary zener diode.

 

[Mariofomil10]

Hi people,

I have a PS5 here, that went through a hell of a repair-attempt from someone watching too much Youtube and never held a soldering iron.

So to make it short, there are components missing....

I not have another board to compare with.

I changed the diode with one from a PS4 board. And I also took a random capacitor and put close to the HDMI-port, after someone in here just said that a PS4 was crowded with 0.1 uF capacitors.

But if we could identify all these, I will make two new photos with the values, so that the community have it for future reference.

View attachment 258699

View attachment 258698

F is not missing, but it would be nice to have the value there anyway.

Thanks for all help.

EDIT: Heres a picture of the underside:
View attachment 260632
The component in white is a mystery. No readings on my multimeter. No continuity. No Ohms. No readings in capacitor-mode (I can not go lower than a few nF) . The component was tested out of circuit. What can it be?

I have a question if d is missing is that a big thing or would it make the hdmi port doesn’t work

 

[RoobySooqy2]

You guys helped me!

 

[jkyoho]

I've looked up the "C1 diode" from China marketplace, and I believe its TOSHIBA 1SS352.
And the "A6 diode" like @Publicpolicyadvocate said. should be nxp bas316

 

[Abdul2]

Hello greetings
Please i need help with the direction for
the pads on ps5 hdmi ripped pads connection details.

 

[Pcb247]

Hi guys ive got a short on a small cap very near hdmi and also short on diode on other side, i removed both, also port and encoder ic but short is still present. Any ideas pls?

 

[k28]

can i find the cap F pn a ps4 motherboard?

 

[boy447374]

If last PICTURE IS referring A and B . I believe A diode is CDZ 5.6B Rohm zener diode. Then B should be 100nf capacitor

Anyone know a good source to buy the diode?

 

[jkyoho]

Anyone know a good source to buy the diode?

mouser or digikey

 

[acez9k]

27Kohm resistor size is 0402, parts number varies from brands you pick

0402 inch correct? as i see it's much larger than the 100nF cap