Hacking [Release] PS-Phive! (ForPS4 6.72) Exploit Host Menu

[Pasqui]

Firmware spoofer works fine. I just tested it now to check. spoofed to 9.05, entered then resumed from rest mode and it said 9.05 in sytem info.
Also to use rest mode you must have 'keep applications suspended' checked in rest mode settings or hen will not stay.

Did you restore your profile backup using the official restore app in system settings straight after you installed the recovery firmware on your new HDD. If not that is why the profileIDs are different.

Also How big is the profile backup (archive.dat) on your USB? PS4\EXPORT\BACKUP\xxxxxxx\archive.dat

my ps4/export/backup folder is empty

 

[viggen66]

ESP8266 version

https://mega.nz/file/Utg00DhT#aF07SabHAtmmkEzzRi2f08rl_Z3QItiFtwLOPvNFlrQ

access point: ps4exploit
password : hackmyps4
custom primary DNS :10.13.37.1

 

[Leeful]

my ps4/export/backup folder is empty

Then that means that you did not make a backup of your profile using the backup/restore in system settings.
This is an important step.


All is not lost if you still have your old HDD. You can plug it back in, make the proper backup, restore it to your new hdd then restore the save and trophy backups using the payloads.

EDIT: if your profile is not activated do not include saves in the profile backup!

 

[Pasqui]

Then that means that you did not make a backup of your profile using the backup/restore in system settings.


All is not lost if you still have your old HDD. You can plug it back in, make the proper backup, restore it to your new hdd then restore the save and trophy backups using the payloads.

EDIT: if your profile is not activated do not include saves in the profile backup!

ok, I try

 

[Leeful]

ok, I try

Thinking about it, my payloads may only restore one of your profiles. I only ever had one profile when I made the payloads.
You might have to run the backup payloads when you are logged in on each profile seperatly.

 

[Pasqui]

Thinking about it, my payloads may only restore one of your profiles. I only ever had one profile when I made the payloads.
You might have to run the backup payloads when you are logged in on each profile seperatly.

ok, now it has become a challenge!

 

[Pasqui]

@Leeful

your payload backed up both users because I logged them both. So, if both are still logged in, the payload should load both. now i'm restoring the PS4 with the backup done on the USB (it really slipped my mind).

Edit: restore not working, check USB drives then nothing.

--------------------- MERGED ---------------------------

I... am... a dumb....

 

[godreborn]

no, not dumb. just something overlooked. happens to me all the time.

 

[Leeful]

no, not dumb. just something overlooked. happens to me all the time.

yeah, me too. We all have off days.

 

[Pasqui]

yeah, me too. We all have off days.

Done!

 

[Leeful]

excellent. Did both profiles restore OK?

 

[Pasqui]

excellent. Did both profiles restore OK?

Yes exactly.
Ouh... one more thing .... FTPS4 does not give me any ip. I used 9b ftp before.

 

[godreborn]

Yes exactly.
Ouh... one more thing .... FTPS4 does not give me any ip. I used 9b ftp before.

is the internet disabled? I know ftp on xproject won't give one if the internet is disabled or the sandisk connect isn't broadcasting. it won't mention it, so I just left the internet enabled, since I'm completely offline anyway.

 

[Leeful]

Yes exactly.
Ouh... one more thing .... FTPS4 does not give me any ip. I used 9b ftp before.

Just checked and the payload in PS-Phive! is working OK.
As @godreborn said, check your network settings on the PS4. They should be the same as they were before but it will do no harm to set them up again.

 

[Pasqui]

Just checked and the payload in PS-Phive! is working OK.
As @godreborn said, check your network settings on the PS4. They should be the same as they were before but it will do no harm to set them up again.

the fact is that with v9b it works perfectly...

 

[Msafari98]

hey Sir.

This UI is better by far from PS-Phwoar. Great Work
The only request I have from you is updating GTA V Lotus modMenu for 1.32 , FW 6.72-7.02
and customizable "Main" section. for example, I want add WebRTE to "Main".

 

[bluntman420]

@Leeful, your talent is definitely needed for 7.02. There is simply nothing close to any of your previous exploit pages available. Currently I am loading the Fan-Threshold bin manually and that sets my PS4 Pro to stay at 60c which makes it sound like a jet engine. Please release an exploit host page for 7.02 if you can. Thanks for everything, much appreciated.

 

[viggen66]

For sure I agree with bluntman420, leeful is very talented to do these exploits, they have been by far the most stables ones, and the most simple ones, thanks leeful

 

[LookaZD]

Ok I decided to move on finnaly from 5.05 to 6.72 with this PS-Phive beauty...
But just a few questions about jailreaking cause last time I did it was 5.05 2 years ago so I forgot almost everything...
1) first thing first I guess I need to mannualy install 6.72 official firmware on top of this one
2) after that I want to self host this PS-Phive from my PC, and in order to do that I need to download it and run Exploit host server and follow instructions
3) enable Internet connection on PS4 and connect to the same WIfi as my PC is..
4) In internet explorer on PS4 I need to delete cookies, browsing history and in URL enter the one from Exploit host server...

and that should be it...?
Did I miss something?

 

[Prb]

Ok I decided to move on finnaly from 5.05 to 6.72 with this PS-Phive beauty...
But just a few questions about jailreaking cause last time I did it was 5.05 2 years ago so I forgot almost everything...
1) first thing first I guess I need to mannualy install 6.72 official firmware on top of this one
2) after that I want to self host this PS-Phive from my PC, and in order to do that I need to download it and run Exploit host server and follow instructions
3) enable Internet connection on PS4 and connect to the same WIfi as my PC is..
4) In internet explorer on PS4 I need to delete cookies, browsing history and in URL enter the one from Exploit host server...

and that should be it...?
Did I miss something?

first enable updates on ps4 if you disable them via 5.05 expolit
then update via usb (best keep wifi off on ps4 when updating fw)
yes ps4 and pc on same network
clear cache
then use Exploit host server with your ps-phive
dont forget disconnect from wifi when done