USB loader gx inconsistencies

[Mikewind]

Me and my friend soft modded my Wii back in 2010/2011 and used wiiflow to play games from a hdd. That old hdd broke but I didn’t do anything modding wise to the Wii. Fast forward to the present, I’m trying to back up my disks to a hdd. I’m using cleanrip to rip them and I’m using Wii back up manger to put the on the hdd. Like the tittle says I’m using usb loader gx to play the games. I only ripped about 11 games before checking to see if they would play. Metroid prime trilogy and naruto clash of ninja revolution 1&2 played normally, xenoblade chronicles would have a black screen that would have reading disc…, mysims, mysims kingdom and mysims agents wouldn’t show the preview channel in usb loader gx and when played would go straight to black screen. Dragon ball bt3 would look like it’s loading but would go to black screen after the online esrb warning, Sonic and the black Knight loads up until you get to the menu select then would freeze. The rest of the games would show the Wii remote safety screen before going to a black screen. I’ve tried using ios249 and 250 as well as forcing ntsc in the options. I’m not sure what else to do.
Here’s my sysreport


SysCheck ME v2.5.0 by blackb0x, JoostinOnline, Double_A, R2-D2199 and Nano
...runs on IOS58 (rev 6175).

Region: NTSC-U
System Menu 4.1U (v449)

Drive date: 12.18.2008
Homebrew Channel 1.1.2 running on IOS58

Console ID: 13424****
Console Type: Wii
Shop Channel Country: United States (49)
Boot2 v4
Found 171 titles.
Found 53 IOS on this console. 6 of them are stubs.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 54321): Trucha Bug
IOS10 (rev 768): Stub
IOS11 (rev 54321): Trucha Bug
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 54321): Trucha Bug
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 54321): Trucha Bug
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 54321): Trucha Bug
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6175): USB 2.0
IOS60 (rev 54321): Trucha Bug
IOS61 (rev 5661): No Patches
IOS70 (rev 54321): Trucha Bug
IOS80 (rev 54321): Trucha Bug
IOS90 (rev 54321): Trucha Bug
IOS202[60] (rev 65535, Info: hermes-v5.1): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 4, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[38] (rev 4, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[37] (rev 65535, Info: hermes-v5.1): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access, Beer Ticket
IOS247 (rev 65535): Trucha Bug, NAND Access, USB 2.0
IOS248[38] (rev 65535, Info: d2x-v11beta1): Trucha Bug, ES Identify, NAND Access
IOS249[56] (rev 65535, Info: d2x-v11beta1): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 65535, Info: d2x-v11beta1): Trucha Bug, NAND Access, USB 2.0
IOS251[58] (rev 65535, Info: d2x-v11beta1): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v65535
Report generated on 05/22/2023.

 

[jeannotte]

Good morning,

check all inconsistencies with this ==>https://gbatemp.net/threads/usb-loader-gx-troubleshooting-guide.617564/

check the format of your USB support, update your loader

 

[CoolMe]

Here’s my sysreport

You're missing Priiloader. Follow this to install it.
As for your games, check them in WiiBackupManager, it's under "tools" and verify the hashes. It should tell you if any of them is corrupt.
Also make sure you're using the latest usbloadergx.
Goes without saying, but your hdd should be formatted as Fat32 32kb cluster size (or ntfs if you want?), and should be set to MBR & have one primary partition.

 

[Mikewind]

Could’ve sworn I had priiloader. I formatted my hdd with guiformat but I’m not sure how to set it to mbr or partitions.

 

[Ouaz]

Could’ve sworn I had priiloader. I formatted my hdd with guiformat but I’m not sure how to set it to mbr or partition

Guiformat? Can you check if the HDD is detected by Nintendont (if you have it)?

I suspect Guiformat to poorly convert HDDs to FAT32, at least in a way some homebrew apps do not like.

Check this topic: https://gbatemp.net/threads/wii-gam...but-gamecube-games-dont.632149/#post-10145093
And here:
https://gbatemp.net/threads/wii-gam...but-gamecube-games-dont.632149/#post-10145172

If you don't mind, test the portable tool I posted there to format your HDD, it could fix your problem.

 

[spikeswan22]

Windows 10's built-in partition manager also works fine

 

[CoolMe]

Use disk management in Windows to see if the hdd has a primary partitions, and if it's set to the MBR (or GPT). Both are important.

 

[Mikewind]

Windows disk management says that its MBR and primary partition