Wii #0592 - Super Smash Bros Brawl (USA)

[Whizz]

One last question:

So I patch the update.inf and replace it with Trucha...
Then I run regionfrii.
Then I burn with imgburn with layer break edit.

So, for my 1.9g Wiikey 3.2E Wii, I don't need brickblocker 1.3R2? This is safe to update now as it is and without dual channels?

You can run regionfrii, you don't have to. It should work. What DVD's will you be using?

 

[dydy]

One last question:

So I patch the update.inf and replace it with Trucha...
Then I run regionfrii.
Then I burn with imgburn with layer break edit.

So, for my 1.9g Wiikey 3.2E Wii, I don't need brickblocker 1.3R2? This is safe to update now as it is and without dual channels?

To remove the updates you now have 2 choices , brickblocker which will remove the entrire update part of the iso and replace it will a whole lot of nothing or you can now use Prophets inf file which empties the actual update out of the wad files...

Since a few game dont run after brickblocker has been used i prefare to us the replacement inf file but i have read that people have got it working after using brickblocker so the choice is yours....either way you wont get duplicate channels on your Wii

gjac1 it is possible i can use WiiUpdatePatcher02???

 

[SpaceJump]

If I already have dual channels from the US-Version of Metroid prime 3, will this get me another two channels after I let it update?

 

[gjac1]

One last question:

So I patch the update.inf and replace it with Trucha...
Then I run regionfrii.
Then I burn with imgburn with layer break edit.

So, for my 1.9g Wiikey 3.2E Wii, I don't need brickblocker 1.3R2? This is safe to update now as it is and without dual channels?

To remove the updates you now have 2 choices , brickblocker which will remove the entrire update part of the iso and replace it will a whole lot of nothing or you can now use Prophets inf file which empties the actual update out of the wad files...

Since a few game dont run after brickblocker has been used i prefare to us the replacement inf file but i have read that people have got it working after using brickblocker so the choice is yours....either way you wont get duplicate channels on your Wii

gjac1 it is possible i can use WiiUpdatePatcher02???

I havent tried the update patcher BUT if it worked for the JPN release then in theory it should work for the US release seeing as the update.inf files are the same

 

[Whizz]

If I already have dual channels from the US-Version of Metroid prime 3, will this get me another two channels after I let it update?

Nope

 

[LOTG]

does US brawl contain any updates?

READ FFS! The anwser is in the post above yours and in atleast 20 other places in this thread!

thats nice. question.. did you miss your protein shake this morning?

I don't take protein shakes, they mess me up even worse. But I DO READ before I post.

 

[dydy]

One last question:

So I patch the update.inf and replace it with Trucha...
Then I run regionfrii.
Then I burn with imgburn with layer break edit.

So, for my 1.9g Wiikey 3.2E Wii, I don't need brickblocker 1.3R2? This is safe to update now as it is and without dual channels?

To remove the updates you now have 2 choices , brickblocker which will remove the entrire update part of the iso and replace it will a whole lot of nothing or you can now use Prophets inf file which empties the actual update out of the wad files...

Since a few game dont run after brickblocker has been used i prefare to us the replacement inf file but i have read that people have got it working after using brickblocker so the choice is yours....either way you wont get duplicate channels on your Wii

gjac1 it is possible i can use WiiUpdatePatcher02???

I havent tried the update patcher BUT if it worked for the JPN release then in theory it should work for the US release seeing as the update.inf files are the same

gjac1 and i see when the inf is patched with WiiUpdatePatcher02 the update is not removed? because de the nfo say this : Insert the game and let it update completely.the update is always here?


???

 

[CockroachMan]

So.. any comments about the game!?

 

[gjac1]

dydy , it will say that it is updating and go through the update procedure but because the file has been patched it wont actually be updating anything, but your game will think it has

 

[KroBa]

Just played it for a bit more than an hour. I forgot to use the layer break. It didn't show any video at 60Hz but I changed my Wii to 50Hz and it ran fine. Hooray for PAL.

I used Prophet's inf file to resign the ISO. 3.2E with WiiKey 1.9g

 

[adiabatic]

OK I HAVE IT WORKING FOR A PAL WII WITH D2PRO!!!!!! THIS IS MY STORY

1. GOT THE GAME
2. WII BRICK BLOCKED
3. REGION FRII'd
Burned with Verbatim DVD+R DL at 4x with ImgBurn and that custom Layerbreak #
4. Inserted
5. Black Screen after start

Second Attempt
1. Got the game
2. Followed the Trucha Signer Instructions available on this site
Burned with Verbatim DVD+R DL at 4x with ImgBurn and that custom Layerbreak #
3. Inserted
4. Wii told me it needed to update
5. Updated to 100%
6. WORKING WOOT!

 

[funkinlesson]

I'm using a WiiKey. Do I have to specify a layerbreak in ImgBurn before burning the ISO?

 

[PabloAM]

Just played it for a bit more than an hour. I forgot to use the layer break. It didn't show any video at 60Hz but I changed my Wii to 50Hz and it ran fine. Hooray for PAL.

I used Prophet's inf file to resign the ISO. 3.2E with WiiKey 1.9g

Can you change the languaje of your console for spanish?

And tell me if SSBB have spanish?

Thanks

 

[ReflEz]

Works on my pal Argon used the wiiupdatepatcher and trucha signer and use regionfrii and video mode changer. I updated and then it runs fine

 

[Redsquirrel]

OK I HAVE IT WORKING FOR A PAL WII WITH D2PRO!!!!!! THIS IS MY STORY

1. GOT THE GAME
2. WII BRICK BLOCKED
3. REGION FRII'd
Burned with Verbatim DVD+R DL at 4x with ImgBurn and that custom Layerbreak #
4. Inserted
5. Black Screen after start

I think the reason why it didnt work was because you used brickblocker.

 

[dydy]

dydy , it will say that it is updating and go through the update procedure but because the file has been patched it wont actually be updating anything, but your game will think it has

OK gjac1

this persuades the game is updated is this? and no risk if if make the complete update no duplicate channel ?

 

[gjac1]

Works on my pal Argon used the wiiupdatepatcher and trucha signer and use regionfrii and video mode changer. I updated and then it runs fine

Did you set all the video modes to PAL60 Interlaced 480I or 3 different PAL modes ??

I ask because mine where all set to PAL60 Interlaced 480I and its playing now with no problems at all

 

[ben_r_]

AGAIN:

Anyone tested this on a D2CKey and if so any problems or anything special have to be done to get it working?

 

[gjac1]

dydy , it will say that it is updating and go through the update procedure but because the file has been patched it wont actually be updating anything, but your game will think it has

OK gjac1

this persuades the game is updated is this? and no risk if if make the complete update no duplicate channel ?

Like a few people and myself have already said, your console will tell you that the update is complete but no actual update took place

 

[dydy]

It is a fictitious ( no real ) update then?..also no risk double channel?