- Author lightninjay
- Creation date
lightninjay
To be clear, resistors labeled as "470" in the SMD format are actually 47 ohms.
lightninjay
Should be fixed now. I recompiled it slightly different in an effort to condense file size and get it to load better.
lightninjay
I recently fixed V.4, you should be able to redownload and not only have a smaller file size, but it should load better as well!
lightninjay
Merci beaucoup! I've been seeing my guide pop up unannounced in other languages. So far I saw Italian, Spanish, and a french website that started translating, but then pointed to gbatemp's download of the english guide.
I did attempt to leave all the text selectable in the PDF to attempt making translation easier, as native speakers could just run it through a translator and then modify it to make more sense in their native tongues. Glad you took on the effort, I just want to help spread the info to as many people need it.
I did attempt to leave all the text selectable in the PDF to attempt making translation easier, as native speakers could just run it through a translator and then modify it to make more sense in their native tongues. Glad you took on the effort, I just want to help spread the info to as many people need it.
lightninjay
It is technically included in the OLED graphic how to wire up the CPU pin to the flex, but I do understand your point. Perhaps im V.4 I will explicitly state how to wire up the flex cable.
lightninjay
Thanks for the 5-star review <3 Glad it has become such an invaluable resource :D
lightninjay
I would, but that falls more in the realm of soldering skill. I feel the guide does a decent enough job warning that thicker wires can be difficult to work with, but when working at this micro scale, "bigger" is also still terribly small. I believe it's adequate to state that 30-40awg wire, both kynar and magnet wire are acceptable for use. I do later explain that Rehius has mentioned if you have issues you can check wire thicknesses/lengths, but ultimately a lot of it seems to come down to good solder welds. In cutting and shortening/changing a wire, one would necessarily be resoldering, increasing their chances of improving their solder joint.
lightninjay
Thank you! Hope it helps :)
-
K3Nv2
-
Xdqwerty
what are you looking at? -
BakerMan
I rather enjoy a life of taking it easy. I haven't reached that life yet though. - S salazarcosplay
-
Psionic Roshambo
-
@
Psionic Roshambo:
I think the medication for is is actually what meth is made from, or a form of it.
-
-
-
-
-
-
-
-
-
-
@
Xdqwerty:
@Psionic Roshambo, the sd card has only about 4 gb left so im not gonna add too many games (im only adding ps1 games if you ask)
-
@
Xdqwerty:
@Psionic Roshambo, the tv stick has a built in emulator with some weird config im not gonna tamper with
-
@
Xdqwerty:
@Psionic Roshambo, and im gonna download legend of dragoon to my ps3 cuz i couldnt fix the problem i mentioned you a while ago and idk if the emulator is the problem (only tested it on epsxe)
-
@
Psionic Roshambo:
yeah those sticks can be a pain, a lot of the time you can't change the firmware or do much with them. Sometimes you can mod them and install like Batocera but it's not common.
-
-
@
Psionic Roshambo:
I had one that the firmware was not able to be changed unless I opened it up and soldered a couple of spots and a wire, but I didn't feel like that so I just bout an Android TV Box
-
-
-
-
@
Xdqwerty:
@Psionic Roshambo, im also gonna download danganronpa 1 to my tv stick (its the psp version of the game, a spanish translation of it)
-
-
-
-
-