==============================================
WASABI DVD UPGRADE AND CONFIG DISC 1.4B BETA
==============================================
What's new in 1.4B ?
===================
+ Supports SPI flash (for Wasabi DX Zero mode)
What's new in 1.4 ?
===================
+ Configuration Menu :
+ Wii Region Free On/Off
+ GC Audio Fix On/Off
+ Drive Read Speed 6x/3x
+ Update Blocker for Imports
+ Update Blocker for Domestic Games
+ Improved Upgrade GUI
+ Improved D2E drivecode (now fully symmetric with other versions)
Upgrade instructions :
======================
Burn the ISO with your favorite tool, run it and follow the instructions!
Don't turn off your Wii in the programming phase.
Once you upgraded, run the disc again to access the Configuration Menu.
If you have to move the Wasabi chip from one Wii drive to another, we
suggest downgrading to 1.3 prior to the move as information specific to your
drive is written to the flash when upgrading to 1.4.
Configuration instructions :
============================
Once you upgraded, run the disc again to access the Configuration Menu.
Press the Reset button quickly to toggle selection or validate. Hold it
to go down. Alternatively you can use a GC controller in port 1.
Recovery Mode :
===============
In case the upgrade is not successful (if you turned off your Wii too early for
example), you must run upgrade again, but this time you have to boot in
"Recovery Mode". The optional "J" wire must be connected to Wasabi in order to
boot in recovery mode:
1) Make sure your Wii is turned off
2) Hold the RESET button on your Wii (don't release it)
3) Turn on your Wii and go to the main menu
4) Insert Updgrade disc and started it
5) You can release the RESET button once the upgrade disc started
Acknowlegements :
=================
Special thanks to the beta testers!
WASABI DVD UPGRADE AND CONFIG DISC 1.4B BETA
==============================================
What's new in 1.4B ?
===================
+ Supports SPI flash (for Wasabi DX Zero mode)
What's new in 1.4 ?
===================
+ Configuration Menu :
+ Wii Region Free On/Off
+ GC Audio Fix On/Off
+ Drive Read Speed 6x/3x
+ Update Blocker for Imports
+ Update Blocker for Domestic Games
+ Improved Upgrade GUI
+ Improved D2E drivecode (now fully symmetric with other versions)
Upgrade instructions :
======================
Burn the ISO with your favorite tool, run it and follow the instructions!
Don't turn off your Wii in the programming phase.
Once you upgraded, run the disc again to access the Configuration Menu.
If you have to move the Wasabi chip from one Wii drive to another, we
suggest downgrading to 1.3 prior to the move as information specific to your
drive is written to the flash when upgrading to 1.4.
Configuration instructions :
============================
Once you upgraded, run the disc again to access the Configuration Menu.
Press the Reset button quickly to toggle selection or validate. Hold it
to go down. Alternatively you can use a GC controller in port 1.
Recovery Mode :
===============
In case the upgrade is not successful (if you turned off your Wii too early for
example), you must run upgrade again, but this time you have to boot in
"Recovery Mode". The optional "J" wire must be connected to Wasabi in order to
boot in recovery mode:
1) Make sure your Wii is turned off
2) Hold the RESET button on your Wii (don't release it)
3) Turn on your Wii and go to the main menu
4) Insert Updgrade disc and started it
5) You can release the RESET button once the upgrade disc started
Acknowlegements :
=================
Special thanks to the beta testers!
