Hacking Sys-Clk module not running

[MelvinSmiley]

Seems that messages like this are being ignored here, there's already a thread from a user with the same problem that nobody answered. WTF is wrong with this module? I spent 6 hours trying to make it work, overclocking the switch was the only reason I event tried to mess with CFW so I kinda need this to work. First it didn't work, then it did, and now it just won't run no matter what I do. I'm on latest atmosphere 13.2 and FW 14.2, trying to install sys-clk 1.0.2. Uninstalled and reinstalled it countless times to no avail.

sys-clk does not seem to be running, please check that it is correctly installed and enabled​

This module is the bane of my existence.

 

[binkinator]

Seems that messages like this are being ignored here, there's already a thread from a user with the same problem that nobody answered. WTF is wrong with this module? I spent 6 hours trying to make it work, overclocking the switch was the only reason I event tried to mess with CFW so I kinda need this to work. First it didn't work, then it did, and now it just won't run no matter what I do. I'm on latest atmosphere 13.1 and FW 14.2, trying to install sys-clk 1.0.2. Uninstalled and reinstalled it countless times to no avail.

sys-clk does not seem to be running, please check that it is correctly installed and enabled​

This module is the bane of my existence.

Yeah, not sure man. Just a data point and answer for you but no solutions I’m afraid.

I’m on 14.1.2 | AMS 1.3.2 | E and sync lock is running without issues.

Haven’t had enough issues with this module to be able to duplicate this issue.

e: did spot one difference…I’m still on 1.0.1-5 rather than 1.0.2



Going to upgrade and see if I can break it.

 

[MelvinSmiley]

I tried sys-clk-1.0.1 from their github page and have the same issue, seems this module is just incompatible with atmosphere 13.2, at least for me.

 

[binkinator]

I tried sys-clk-1.0.1 from their github page and have the same issue, seems this module is just incompatible with atmosphere 13.2, at least for me.

Yeah…I think it’s something else with your setup. I’m on 1.3.2 as well. Latest and greatest everything. Perhaps you have a bad config in place that’s causing it to fail regardless of the version?

 

[MelvinSmiley]

Yeah…I think it’s something else with your setup. I’m on 1.3.2 as well. Latest and greatest everything. Perhaps you have a bad config in place that’s causing it to fail regardless of the version?

My hekate.ini config is just the usual stuff they recommend in cfw guides, nothing extraordinary. It used to work with my system too, for about 5 minutes, and then after a reboot it wouldn't load anymore. Had no issues running other homebrew software, just this sys clk module. Well, I guess there's nothing I can do atm except wait for an update.

 

[binkinator]

My hekate.ini config is just the usual stuff they recommend in cfw guides, nothing extraordinary. It used to work with my system too, for about 5 minutes, and then after a reboot it wouldn't load anymore. Had no issues running other homebrew software, just this sys clk module. Well, I guess there's nothing I can do atm except wait for an update.

How about your sys-clk config? Any kruft stored there perhaps?

 

[MelvinSmiley]

It's just the usual stuff in their config.ini.template, [values] temp_log_interval_ms=0 csv_write_interval_ms=0
and 2 overclocking examples that are formatted as comments so they don't work anyway. Tried changing the config.ini.template to config.ini, didn't do anything.

 

[binkinator]

It's just the usual stuff in their config.ini.template, [values] temp_log_interval_ms=0 csv_write_interval_ms=0
and 2 overclocking examples that are formatted as comments so they don't work anyway. Tried changing the config.ini.template to config.ini, didn't do anything.

Is there anything in /config/sys-clk/log.txt?

e: looks like you need to have /config/sys-clk/log.flag set to get logs, but it might be worth a clue.

I see you opened a ticket on github. Good stuff.

I was thinking github or the official gbatemp thread for it: https://gbatemp.net/threads/sys-clk-under-overclocking-sysmodule.531372/page-58

 

[MelvinSmiley]

[2022-06-26 17:17:33.007] === sys-clk 1.0.1 ===
[2022-06-26 17:17:37.728] Ready
[2022-06-26 17:17:37.751] [mgr] sys-clk status: enabled
[2022-06-26 17:17:37.764] [mgr] TitleID change: 0100000000001000
[2022-06-26 17:17:37.776] [mgr] CPU clock change: 1020.0 Mhz
[2022-06-26 17:17:37.788] [mgr] GPU clock change: 307.2 Mhz
[2022-06-26 17:17:37.801] [mgr] Memory clock change: 1331.2 Mhz
[2022-06-26 17:17:37.822] [!] ASSERT_RESULT_OK: tsGetTemperatureMilliC
RC: [0xf601] 0001-0123
in /home/sam/workspace/switch/sys-clk/sysmodule/src/clocks.cpp:325
[2022-06-26 17:17:37.881] Exit
[2022-06-26 17:19:10.004] === sys-clk 1.0.1 ===
[2022-06-26 17:19:14.689] Ready
[2022-06-26 17:19:14.705] [mgr] sys-clk status: enabled
[2022-06-26 17:19:14.721] [mgr] TitleID change: 0100000000001000
[2022-06-26 17:19:14.733] [mgr] CPU clock change: 1020.0 Mhz
[2022-06-26 17:19:14.744] [mgr] GPU clock change: 307.2 Mhz
[2022-06-26 17:19:14.757] [mgr] Memory clock change: 1331.2 Mhz
[2022-06-26 17:19:14.770] [!] ASSERT_RESULT_OK: tsGetTemperatureMilliC
RC: [0xf601] 0001-0123
in /home/sam/workspace/switch/sys-clk/sysmodule/src/clocks.cpp:325
[2022-06-26 17:19:14.783] Exit

Hm, it looks like the module itself is working, it's just the overlay that is broken for some reason.

 

[binkinator]

[2022-06-26 17:17:33.007] === sys-clk 1.0.1 ===
[2022-06-26 17:17:37.728] Ready
[2022-06-26 17:17:37.751] [mgr] sys-clk status: enabled
[2022-06-26 17:17:37.764] [mgr] TitleID change: 0100000000001000
[2022-06-26 17:17:37.776] [mgr] CPU clock change: 1020.0 Mhz
[2022-06-26 17:17:37.788] [mgr] GPU clock change: 307.2 Mhz
[2022-06-26 17:17:37.801] [mgr] Memory clock change: 1331.2 Mhz
[2022-06-26 17:17:37.822] [!] ASSERT_RESULT_OK: tsGetTemperatureMilliC
RC: [0xf601] 0001-0123
in /home/sam/workspace/switch/sys-clk/sysmodule/src/clocks.cpp:325
[2022-06-26 17:17:37.881] Exit
[2022-06-26 17:19:10.004] === sys-clk 1.0.1 ===
[2022-06-26 17:19:14.689] Ready
[2022-06-26 17:19:14.705] [mgr] sys-clk status: enabled
[2022-06-26 17:19:14.721] [mgr] TitleID change: 0100000000001000
[2022-06-26 17:19:14.733] [mgr] CPU clock change: 1020.0 Mhz
[2022-06-26 17:19:14.744] [mgr] GPU clock change: 307.2 Mhz
[2022-06-26 17:19:14.757] [mgr] Memory clock change: 1331.2 Mhz
[2022-06-26 17:19:14.770] [!] ASSERT_RESULT_OK: tsGetTemperatureMilliC
RC: [0xf601] 0001-0123
in /home/sam/workspace/switch/sys-clk/sysmodule/src/clocks.cpp:325
[2022-06-26 17:19:14.783] Exit

Hm, it looks like the module itself is working, it's just the overlay that is broken for some reason.

Yeah, that looks good.

side note: the version is still 1.0.1…I don’t think they bumped the revision For 1.0.2

E: attaching my working overlay in a zip file if you want to temporarily try it and see if that fixes things…

 

[MelvinSmiley]

Yeah, that looks good.

side note: the version is still 1.0.1…I don’t think they bumped the revision For 1.0.2

E: attaching my working overlay in a zip file if you want to temporarily try it and see if that fixes things…

Thx, will try that.

 

[StringIsNullOrEmpty]

Have you tried rebooting the machine?
I had problems with sys-clk, too, even with a very bare-bones setup. I discovered that rebooting the machine was necessary.

 

[MelvinSmiley]

I tried the "uncapped gpu and other extras" sys clk fork and now the overlay works for some reason, hope it stays that way.

 

[MelvinSmiley]

Have you tried rebooting the machine?
I had problems with sys-clk, too, even with a very bare-bones setup. I discovered that rebooting the machine was necessary.

Reboots did nothing for me unfortunately but the 10.2a "uncapped gpu and other extras" sys clk fork works for now.

 

[binkinator]

I tried the "uncapped gpu and other extras" sys clk fork and now the overlay works for some reason, hope it stays that way.

Was just looking at that guy…it’s ahead of main. Why not? Glad you’re sorted!

…for those following along: https://github.com/jope82/sys-clk-uncapped-gpu-and-other-extras

 

[MelvinSmiley]

Was just looking at that guy…it’s ahead of main. Why not? Glad you’re sorted!

…for those following along: https://github.com/jope82/sys-clk-uncapped-gpu-and-other-extras

I'm very happy too, will keep my system as it is now for the foreseeable time so it doesn't break again, lol.

 

[Metoroid0]

How did you solved the issue, cause i have the same error?

 

[binkinator]

How did you solved the issue, cause i have the same error?

What issue are you seeing and what have you done thus far to try and fix it?

 

[Metoroid0]

What issue are you seeing and what have you done thus far to try and fix it?

"sys-clk does not seem to be running, please check that it is correctly installed and enabled"​

In Tesla overlay and in app. I have a suspicion that app itself is broken. Im on latest update and atmosphere.​

 

[binkinator]

sys-clk does not seem to be running, please check that it is correctly installed and enabled​

Did you install sys-clk? how did you go about that?

did you enable sys-clk? Is it actually running?