Originally this switch had an Hwfly RP2040 Modchip and it worked fine for a bit when it suddenly caused slow emmc and read/write errors. Then, the switch no longer booted past the Nintendo Switch logo, both on ofw (on ofw the screen dims after sometime but still stays at the logo) and sysnand cfw. Online it was said that maybe the wifi chip could be broken so I booted L4T Ubuntu and the Wifi chip still seemed to work(connected to wifi, played youtube etc.). I then replaced the Hwfly RP2040 with a standard RP2040 Zero install. Then I saw that maybe the emmc got corrupted so I made a nand backup along with prod.keys and BOOT0 and BOOT1 and proceeded with suchmememanyskill's unbrick guide to no avail, switch still did not boot. Afterwards I tried creating an emuNand to see if it would boot from there (still didn't), ran the system and boot.bis restore on the emuNand (still no luck) and eventually gave up which is why I'm now seeking your help. I think maybe it's another hardware issue somewhere on the board, because even if the emmc would be completely dead a restored emuNand should still be able to boot right?
I have the latest atmosphere, hekate and sigpatches, 256gb Fat32 sd card, partition based emuNand.
I have the latest atmosphere, hekate and sigpatches, 256gb Fat32 sd card, partition based emuNand.