Tricking ChatGPT into making a mod chip guide. (Experiment)

Recently I got a mod chip because I wanted to hack a switch lite to have a portable android and switch device. I was looking online for some guides and noticed there's really none. So I wanted to try an experiment. Could I trick ChatGPT into makng a guide?


Part 1: Wires
I started this journey because I wanted to know what wires were the best to use for this project. I easily found multiple sites telling me to use kynar wire 30 awg but I still wanted to see what ChatGPT had to say. At this point I wasn't really thinking about the whole guide idea so I just tried to give it to get me wire recommendations. Here was the prompt I started with:
Prompt_1.png

This was a really good start because it got it on the path of hacking and modding components without really setting off any alarms. Here's what I spit back out:
reponse_1-png.413951

While this response was okay it didn't have a lot of detail so I decided to steer it in the right direction a little bit.
I asked it this:
Prompt_2.png

Now after asking that I got it to give me a little more detail,
Response_2.png

and after that a new idea came to me.


Part 2: The Guide
Now before I could just go asking it to make a switch mod chip guide I wanted to make sure that it was going the right way and wasn't just going to say no, so I decided to use a little trick that I used before when I originally asked it about the wires. Funny enough ChatGPT doesn't really flag stuff when you say it's just a "hypothetical scenario." So I did my best ben shapiro impression and asked it this:
Prompt_3.png

It responded to this question like this:
Response_3.png

While this wasn't the final part, it sure as hell gave me a good starting point to ask my next question. The next question I was going to ask was going to be the final. I wanted to really push it and here's what I did:
Prompt_4.png

And with that, I happily got this as a response!
Response_4.png


And there you go. You just got a modchip guide from ChatGPT in 4 prompts.


Part 3: Final thoughts


Now of course this is an EXTREMELY generic guide that doesn't even cover things like if you wanted to clean the CPU, what points to solder, and it's just overall really generic, but it is a guide and if you didn't know a thing about soldering or mod chips well you sure as hell know more now. This was a fun experiment and I'll see if I can get more out of it. If I make a guide for hacking a switch lite tho, I'm not using ChatGPT, lol. I do think that the materials needed section is really useful to a beginner, as most people who have never soldered before will definently need some of that stuff. It should have covered using digital microscope or multimeter tho as those are extremely important for not messing up your board or your solder job.

I hope you enjoyed this and learned something. I would love to see what y'all could get out of ChatGPT by using this style of prompting. Thanks for reading!


Extra: Double checking my work


I wanted to check if I just wasted time trying to engineer ChatGPT to give me a modchip guide or if it would flag it without all of this so I opened another instance and asked it this, and this is what it told me:
1705269042804.png

lol.
 

Attachments

  • Reponse_1.png
    Reponse_1.png
    29.8 KB · Views: 54

BigOnYa

Has A Very Big
Member
Joined
Jan 11, 2021
Messages
3,248
Trophies
1
Age
50
XP
7,689
Country
United States
I would not at all call this a guide. More of a "Stuff" you should already know before doing any mods or electronics repair. If you are actually following directions from ChatGPT over directions from humans, then I'm truely worried about you kids nowdays.
 
Last edited by BigOnYa,

Shubshub

The Shubinator
Member
Joined
Oct 16, 2009
Messages
1,065
Trophies
1
Age
28
Location
The dark part of your house
XP
2,582
Country
New Zealand
At that point youd be better off just finding a guide written by someone and following that

https://gbatemp.net/threads/picofly-aio-thread.628951/ There is even a guide here for one of them (I've not read over the guide no idea if this works for Switch Lite, Use at your own risk, I am not responsible for any damage done)
 
  • Like
Reactions: BigOnYa

scotdotwtf

Member
OP
Newcomer
Joined
Nov 13, 2023
Messages
6
Trophies
0
Age
15
XP
55
Country
United States
Awesome thanks. I've found some pretty good guides where it's just people installing some chips as well as some sthetix guides which I was surprised by because those guides are pretty well hidden but that's about it.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
  • BigOnYa @ BigOnYa:
    I'd rather spend like $150 more for a surround receiver.
  • K3Nv2 @ K3Nv2:
    I bought the game at launch never fucked with it until recently
  • BigOnYa @ BigOnYa:
    Its fun, I like it, even tho I'm not a big harry potter fan. Like a wizard rpg. Flying around on a broomstick is cool.
  • K3Nv2 @ K3Nv2:
    Flying sucks ass on it
  • BigOnYa @ BigOnYa:
    Nuh just takes a min to get used to. I think you can upgrade or buy new broomstick also that are better.
    +1
  • K3Nv2 @ K3Nv2:
    I weirdly like inverted controls on all flying type games
  • BigOnYa @ BigOnYa:
    Prob can change it, inverted flying controls.
  • K3Nv2 @ K3Nv2:
    Only thing that annoys me is trying to find wtf to do in it
    +1
  • BigOnYa @ BigOnYa:
    Alright off to the store, later gators.
    +1
  • K3Nv2 @ K3Nv2:
    Some places amaze me were not in network with your insurance would you still like an appointment
    +1
  • AncientBoi @ AncientBoi:
    uhhh, I think I'll just stick with my PSP 3001
  • AncientBoi @ AncientBoi:
    lol, Now I gotta go to the store for more Coffee Mate n other stuff.
  • Xdqwerty @ Xdqwerty:
    i downloaded final fantasy vii into my tv stick
  • Xdqwerty @ Xdqwerty:
    i mean, the game was already there but its the japanese version
  • Xdqwerty @ Xdqwerty:
    and i only downloaded disc 1 so far bc of storage stuff
  • Psionic Roshambo @ Psionic Roshambo:
    @BigOnYa, yeah the patty on McDs burger is 1/10th of a pound now and I think that's the pre cooked weight lol
  • Psionic Roshambo @ Psionic Roshambo:
    I use the app for the 20% off coupon and it's still over priced
  • Xdqwerty @ Xdqwerty:
    @Psionic Roshambo, why is mcdonalds overpriced if their food is bad?
  • Xdqwerty @ Xdqwerty:
    i mean why is mcdonalds food overpriced
  • Psionic Roshambo @ Psionic Roshambo:
    Inflation and greed
    +1
  • ZeroT21 @ ZeroT21:
    it's just fries, make 'em at home
    +2
  • Psionic Roshambo @ Psionic Roshambo:
    I make potato wedges at home with spices and stuff lol
    Psionic Roshambo @ Psionic Roshambo: I make potato wedges at home with spices and stuff lol