So the console refuses to switch to HDMI mode, claiming that the setting couldn't be applied - which supposedly means it doesn't see the HDMI cable as plugged in.
I can get up to 1080i via component cables, and the console looks fine on the GamePad...
Now, I would just write off the HDMI port as bad, as it is a little bit loose, but the actual pins look fine...
Plus, if I start the "DC Init" Recovery Menu with UDPIH, the console actually outputs via HDMI just fine - in 480p, obviously, but still - that should mean the issue can be at least worked around?
I tried using the WiiU Video Mode changer, but it just crashes when HDMI is set.
I also opened the console and reflowed the connector pins, but this made no difference.
Any ideas?
I can get up to 1080i via component cables, and the console looks fine on the GamePad...
Now, I would just write off the HDMI port as bad, as it is a little bit loose, but the actual pins look fine...
Plus, if I start the "DC Init" Recovery Menu with UDPIH, the console actually outputs via HDMI just fine - in 480p, obviously, but still - that should mean the issue can be at least worked around?
I tried using the WiiU Video Mode changer, but it just crashes when HDMI is set.
I also opened the console and reflowed the connector pins, but this made no difference.
Any ideas?