I just tested by launching Wiistation with my 1GB hard drive and it works, be sure to press the PS button to activate the controller, LED 1 should light up.Thanks for the answer, I can't get the DS3 to work on usb port 1, while Wiistation is launched from usb port 0.
Maybe it's not possible, then.
Hi friend, how did you get the controller to work? because I only see the usb hid icon but the controller does not respond or do anything, although on Nintendo it does work for me. Any help would be appreciated ^^I just tested by launching Wiistation with my 1GB hard drive and it works, be sure to press the PS button to activate the controller, LED 1 should light up.
Hi friend, how did you get the controller to work? because I only see the usb hid icon but the controller does not respond or do anything, although on Nintendo it does work for me. Any help would be appreciated ^^
When I plug the DS3 and press the home button, the 4 leds keep blinking, and the controller does not respond. 054C_0268.ini is correctly placed in usb://wiisxrx/controllers.I just tested by launching Wiistation with my 1GB hard drive and it works, be sure to press the PS button to activate the controller, LED 1 should light up.
When I plug the DS3 and press the home button, the 4 leds keep blinking, and the controller does not respond. 054C_0268.ini is correctly placed in usb://wiisxrx/controllers.
With HIDTest, the 4 leds blink too, but the controller responds (though it doesn't find the controller.ini file at the USB root)
I tried with 2 different DS3, and 2 different usb cables. No luck.
I never tried HID controllers with my Wii, as I have genuine GC controllers et Classic Controllers (V1). I'll try on Nintendont to see if it works here.
Thanks for the test and the help! (I know the problem is on my side now ^^)
Post automatically merged:
Edit:
I tested the Dualshock 3 on Nintendont (launched from the same USB device on port 0, and the DS3 on port 1) and...
it works!
After pressing the home button, the LED 1 lights up, and the controller responds.
Still no luck with Wiistation.
Ah, thanks for the info.Apparently Wiistation always look for files in SD path even when launching it via USB, I've removed sdcard and it no longer detects controllers even with the presence of ini files in wiisxrx/controllers usb folder, So I confirm that HID controllers only work with sdcard
Hi friends @Ouaz and @takashiii likewise, I still can't get the PS2 controller to work in wiistation, my VID is: 0E8F and my PID is: 0031. Anyway, I'm sharing my ini file here so you can see it, on Nintendo that's always bothered me. It worked perfectly but in Wiistation it still doesn't work for me. PD: The file that I uploaded here in the forum does not have the .ini extension since it did not let me upload it ^^When I plug the DS3 and press the home button, the 4 leds keep blinking, and the controller does not respond. 054C_0268.ini is correctly placed in usb://wiisxrx/controllers.
With HIDTest, the 4 leds blink too, but the controller responds (though it doesn't find the controller.ini file at the USB root)
I tried with 2 different DS3, and 2 different usb cables. No luck.
I never tried HID controllers with my Wii, as I have genuine GC controllers et Classic Controllers (V1). I'll try on Nintendont to see if it works here.
Thanks for the test and the help! (I know the problem is on my side now ^^)
Post automatically merged:
Edit:
I tested the Dualshock 3 on Nintendont (launched from the same USB device on port 0, and the DS3 on port 1) and...
it works!
After pressing the home button, the LED 1 lights up, and the controller responds.
Still no luck with Wiistation.
This ini should work:Hi friends @Ouaz and @takashiii likewise, I still can't get the PS2 controller to work in wiistation, my VID is: 0E8F and my PID is: 0031. Anyway, I'm sharing my ini file here so you can see it, on Nintendo that's always bothered me. It worked perfectly but in Wiistation it still doesn't work for me. PD: The file that I uploaded here in the forum does not have the .ini extension since it did not let me upload it ^^
Any help I would appreciate please guys @xjsxjs197 @SaulFabre @Jokippo , I really want to be able to use my playstation 2 controller in wiistation as a hid controller <3
[PS2 Controller For WiiStation]
VID=0E8F
PID=0031
Polltype=1
DPAD=1
DigitalLR=1
MultiIn=1
MultiInValue=01
KeyA=5,80
KeyB=5,40
KeyX=5,20
KeyY=5,10
KeyL1=6,04
KeyR1=6,08
KeyL2=6,01
KeyR2=6,02
KeyStart=6,20
KeySelect=6,10
KeyLeft=5,06
KeyDown=5,04
KeyRight=5,02
KeyUp=5,00
RightUp=5,01
DownRight=5,03
DownLeft=5,05
UpLeft=5,07
StickX=3,1A,100
StickY=4,1A,100
CStickX=2,1A,100
CStickY=1,1A,100
LAnalog=0
RAnalog=0
Rumble=1
RumbleType=0
RumbleDataLen=05
RumbleDataOn=01,00,00,7F,7F
RumbleDataOff=01,00,00,00,00
RumbleTransferLen=05
RumbleTransfers=1
If you want to use it only with USB you can simply replace SD with USB in the source code and compile your own dolAh, thanks for the info.
So finally, the problem is not my end. ^^
The code for reading the .ini file from the USB port is already implemented, but it seems there's a bug with it.
If xjsxjs197 read this, maybe he will fix it easily.
Okay friend I'll try this ini file to see how it goes :3This ini should work:
[PS2 Controller For WiiStation] VID=0E8F PID=0031 Polltype=1 DPAD=1 DigitalLR=1 MultiIn=1 MultiInValue=01 KeyA=5,80 KeyB=5,40 KeyX=5,20 KeyY=5,10 KeyL1=6,04 KeyR1=6,08 KeyL2=6,01 KeyR2=6,02 KeyStart=6,20 KeySelect=6,10 KeyLeft=5,06 KeyDown=5,04 KeyRight=5,02 KeyUp=5,00 RightUp=5,01 DownRight=5,03 DownLeft=5,05 UpLeft=5,07 StickX=3,1A,100 StickY=4,1A,100 CStickX=2,1A,100 CStickY=1,1A,100 LAnalog=0 RAnalog=0 Rumble=1 RumbleType=0 RumbleDataLen=05 RumbleDataOn=01,00,00,7F,7F RumbleDataOff=01,00,00,00,00 RumbleTransferLen=05 RumbleTransfers=1
Post automatically merged:
If you want to use it only with USB you can simply replace SD with USB in the source code and compile your own dol
@takashiii my friend the .ini file that you sent me here on the forum worked for me, thanks to you and all of you I can play perfectly with my PS2 controller and my Gamecube controller in Wiistation ^^ I'm super happy and very hopeful that they will continue improving the emulator even more, keep working well <3 @xjsxjs197 I would like to ask you to try Spanish PAL games with enable force NTSC since they have aspect ratio and fonts problems, the revision 17 of the wiistation emulator carried out by @Jokippo perfectly solved all these aspect ratio problems It would be interesting if you took a look at the code so you can see how he was able to solve all the aspect ratio problems when the force NTSC option is activated ^^ Without further ado, I send you all a hug and greetings from my beautiful country Venezuela :3This ini should work:
[PS2 Controller For WiiStation] VID=0E8F PID=0031 Polltype=1 DPAD=1 DigitalLR=1 MultiIn=1 MultiInValue=01 KeyA=5,80 KeyB=5,40 KeyX=5,20 KeyY=5,10 KeyL1=6,04 KeyR1=6,08 KeyL2=6,01 KeyR2=6,02 KeyStart=6,20 KeySelect=6,10 KeyLeft=5,06 KeyDown=5,04 KeyRight=5,02 KeyUp=5,00 RightUp=5,01 DownRight=5,03 DownLeft=5,05 UpLeft=5,07 StickX=3,1A,100 StickY=4,1A,100 CStickX=2,1A,100 CStickY=1,1A,100 LAnalog=0 RAnalog=0 Rumble=1 RumbleType=0 RumbleDataLen=05 RumbleDataOn=01,00,00,7F,7F RumbleDataOff=01,00,00,00,00 RumbleTransferLen=05 RumbleTransfers=1
Post automatically merged:
If you want to use it only with USB you can simply replace SD with USB in the source code and compile your own dol
Glad it worked for you, have fun.Okay friend I'll try this ini file to see how it goes :3
Post automatically merged:
@takashiii my friend the .ini file that you sent me here on the forum worked for me, thanks to you and all of you I can play perfectly with my PS2 controller and my Gamecube controller in Wiistation ^^ I'm super happy and very hopeful that they will continue improving the emulator even more, keep working well <3 @xjsxjs197 I would like to ask you to try Spanish PAL games with enable force NTSC since they have aspect ratio and fonts problems, the revision 17 of the wiistation emulator carried out by @Jokippo perfectly solved all these aspect ratio problems It would be interesting if you took a look at the code so you can see how he was able to solve all the aspect ratio problems when the force NTSC option is activated ^^ Without further ado, I send you all a hug and greetings from my beautiful country Venezuela :3
The problem I mentioned about forcing 60Hz persists, so I went back to version 3.1, where it doesn't occurLatest WiiStation build until git 8e34107
https://github.com/xjsxjs197/WiiSXRX_2022/commit/8e341079e861a2d299be6b4a158bb6a41b5118a3
What's new:
Please test this game, thanks!
- Update GNU Lightning until latest of 28/04/2024
- Update to latest changes from upstream PCSX-ReARMed until git 87a0a63.
- revert controller in autoboot changes. caused some issues.
- attempt to improve speed in CTR: Crash Team Racing, by adding that game to the cycle multiplier override database in 200 (instead of default 175). Suggested by @Zorg07 and helped by @xjsxjs197.
- Update Chinese translation.
- Some more HID controller handling updates.
- some more other things and updates...
Wow, thank you (and xjsxjs197 too), I hope it will work!What does this mean? Because it is necessary to read the HID INI (.ini) configuration file of the USB, it is always necessary to initialize the USB.
Maybe this fixes the issues of HID controllers that cannot be used if we're loading WiiStation from USB?