Switch-OC-Suite

MonieGold2426 · Apr 16, 2024

guily6669 said:
I don't know exactly if they allow me to post here on GBATemp or not since they all don't care for this forum anymore...

So I kinda posted a image if you know what I mean

ps: But whatever here it is... though for me on Firefox the image keeps working fine though doesn't seem to work on Edge and maybe any other Chromium based browser, no idea...

Hi, I would like to know if the loader.kip included here was already preconfigured? or do I still need to edit some things this to undervolt my CPU and GPU aswell as the RAM speed. Thank you.

jnl1 · Apr 17, 2024

guily6669 said:
I don't know exactly if they allow me to post here on GBATemp or not since they all don't care for this forum anymore...

So I kinda posted a image if you know what I mean

ps: But whatever here it is... though for me on Firefox the image keeps working fine though doesn't seem to work on Edge and maybe any other Chromium based browser, no idea...

Thanks!
So for Erista with 17.0.1 and AMS 1.7.0 I take "EOS 1.1 - atmosphere 1.7.0 pre" and "lineon conf5 (best for Erista)"?

guily6669 · Apr 17, 2024

MonieGold2426 said:
Hi, I would like to know if the loader.kip included here was already preconfigured? or do I still need to edit some things this to undervolt my CPU and GPU aswell as the RAM speed. Thank you.

All is stock with the latest updated stuff, you can use the built-in configurator html page (kinda like OC suite online configurator) in a PC or use the wizard to able to configure it on-the-fly from switch overlay and just reboot to apply.

jnl1 said:
Thanks!
So for Erista with 17.0.1 and AMS 1.7.0 I take "EOS 1.1 - atmosphere 1.7.0 pre" and "lineon conf5 (best for Erista)"?

EOS is one thing and Lineon Conf5 is a different one... EOS is the updated OC suite and the Conf5 was specially made for erista by Lineon and allows very low CPU voltage at high clocks with no performance loss, EOS sadly still doesn't have that yet for Erista...

You can try "sys_clk..." + "EPV+Wizard" (which is Lineon Conf5 loader.kip but with the overlay to be able to configure from switch without needing Conf5 PC configurator.

If it doesn't work sadly you will have to use EOS instead or just use atmosphere 1.6.2 instead for now...

Also on my Erista I'm currently using GPU UV table which allows to chose voltage per each GPU frequency but I still haven't finished the whole setup on mine.

I'm currently using:

998mhz = 920mv;
921mhz = 885mv;
844mhz = 855mv;
768mhz = 820mv;
691mhz = 790mv;

Still need to find the lowest frequencies but that's the lowest I could go before having issues or lower performance on mine and somehow I'm getting even higher FPS with GPU UV compared to stock which doesn't make much sense on frequencies that I'm not both power or temp limited

Ram I'm currently using 2131mhz at EMC DVB 875mv with timings auto_adj_all (4-2-5-5-3-5-2) but at high voltage of 1.3125v...

I recommend using ram set to No_adj_all and set max voltage of 1.175 and go for the highest frequency you can get at that voltage which is the max "factory spec" safe voltage for the ram chips, some lucky Eristas can actually do 2131mhz at that voltage but most will need like 1.25v or more specially when using gpu_uv seems to require more voltage to be stable.

Ps: in my opinion it's totally fine going above 1.175v on the ram and almost everyone achieving the highest will always use a lot more, but I recommend at least some cooling on the mems and mems are one of the things that usually bring the highest FPS as switch is severely mem bandwidth capped on most games and by far what brings highest performance per lowest power consumption, I measured around 0.6w more from stock mem voltage at 1600mhz to mine at 2131mhz higher voltage which higher CPU\GPU clocks it jumps quickly pretty high.

4IFIR mod 4 example uses crazy 1.35v for 2133mhz on Erista which I totally don't recommend...

EDIT: Attached is an example of the wizard that allows you to configure your loader.kip from switch overlay (this is the conf5 wizard "EPV + Wizard" but the EOS toolkit one should be similar...)

EDIT2: Added testing apps and a nice overlay to test in-game performance on my previous post, removed the picture and put the ".rar" files.

jnl1 · Apr 19, 2024

guily6669 said:
You can try "sys_clk..." + "EPV+Wizard" (which is Lineon Conf5 loader.kip but with the overlay to be able to configure from switch without needing Conf5 PC configurator.

This worked with my Erista on 17.0.1 and AMS 1.7.0! Thank you! Now I can finally use 1862 MHZ again. And the power consumption is really low! Thanks again! (BTW: i installed sys-patch in parallel, I am not sure if this was necessary).

guily6669 · Apr 19, 2024

jnl1 said:
This worked with my Erista on 17.0.1 and AMS 1.7.0! Thank you! Now I can finally use 1862 MHZ again. And the power consumption is really low! Thanks again! (BTW: i installed sys-patch in parallel, I am not sure if this was necessary).

I recommend going to at least 1996mhz, try it with ram set to No_adjust_all without changing any timings value and just memtest and just keep increasing mem voltage a bit until you find stability, when you find it, you should do like a memtest for a entire night when you go to sleep and only after start testing in games, if it crashes in some games, just add 1 step more voltage (EMC Vdd2 Voltage)...

1996mhz is fine for all Eristas and will give you a nice speed bump to both CPU and GPU and it's the lowest power consumption thing that will give you by far the biggest jump in performance while increasing CPU and GPU frequency increases power a lot depending on the frequency... the ram from what you have to 1996mhz will likely be something like 0.1 or 0.2w more...

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
B3711 is currently testing Erista CPU UV, but it's beta testing only...

..::EDITED::..

jnl1 · Apr 19, 2024

I am not really sure. For me GPU frequency increasing always gives me the best boost, at least this is how it looks like to me.
At the moment I am on 1996 MHz Ram, 1175 EMC Vdd2, 0 mV EMC DVB Shift, DRAM Timing 0 and 0 for all other timings.
For demanding games like FC 24 with 60 FPS I get mostly <8W power consumption. But I am not sure if this is the best I can get out of my system. There are so much variants to try and change.

guily6669 · Apr 19, 2024

jnl1 said:
I am not really sure. For me GPU frequency increasing always gives me the best boost, at least this is how it looks like to me.
At the moment I am on 1996 MHz Ram, 1175 EMC Vdd2, 0 mV EMC DVB Shift, DRAM Timing 0 and 0 for all other timings.
For demanding games like FC 24 with 60 FPS I get mostly <8W power consumption. But I am not sure if this is the best I can get out of my system. There are so much variants to try and change.

Sure GPU frequency has a big impact on performance but it eats power like I said, ram is the highest boost for the lowest amount of power consumption option...

Also if you lock a game to 60FPS and let's say it works there perfectly at like 768mhz on GPU the more ram speed and timings you have the GPU usage will get lower with the ram boost while staying at 60fps same thing... it leaves basically more CPU and GPU headroom for games the higher the ram speed and is likely to even make power draw to become lower since at same frequency there's less GPU usage, but I'm guessing that would be game dependent and if you have enough performance to maintain "X" FPS cause if it always lack a lot of GPU no matter how much ram speed you have GPU will be always maxed out...

Sure you can try 2133mhz, maybe you could be one of the few whit a Erista that can do 2133mhz at 1.175v however it will likely need much more.

AND REMEMBER ALWAYS MAKE A BACKUP OF YOUR EMUNAND OR AT LEAST GAME SAVES specially when messing with ram timmings (use Auto_adjust_all and then set timmings, timing P6 should always be maxed out, the others you have to keep increasing, the highest boost is on P1, P5 and P7 related to P1, P5 is probably the most dangerous one).

On mine 2133mhz with ram set to auto_adjust_all and timings 4-2-5-5-3-5-2 gives me a huge boost over 1996mhz and OKish boost over 2133mhz with no_adjust_all, but mine is already above 1.3V due to the high GPU UV I have it requires more voltage on the ram to get stable...

But with the GPU UV I can also use much higher clocks without going over the board power limit, not consuming battery and much lower Fan noise...

ps: With Lineon Conf5 on high CPU frequencies you already save quite a lot of power, I measured with my watt-o-meter but can't remember however I know it was a good saving over any OC suite since EVER and I tested only with the 3 cores at 100% with 4th idle but 4 example Kingdom Come Deliverance game specially on a fast horse when going fast trough towns at 1581mhz that I use the 4 cores are almost maxed out which will be a big power saving to increase GPU frequency instead...

ps2: But soon things will likely change when EOS 1.2 final version come out it will be the first time "OC suite" will feature Erista CPU undervolting and goes beyond Lineon Conf5, but still under testing...

DimitriMaia · Apr 20, 2024

guily6669 said:
All is stock with the latest updated stuff, you can use the built-in configurator html page (kinda like OC suite online configurator) in a PC or use the wizard to able to configure it on-the-fly from switch overlay and just reboot to apply.

EOS is one thing and Lineon Conf5 is a different one... EOS is the updated OC suite and the Conf5 was specially made for erista by Lineon and allows very low CPU voltage at high clocks with no performance loss, EOS sadly still doesn't have that yet for Erista...

You can try "sys_clk..." + "EPV+Wizard" (which is Lineon Conf5 loader.kip but with the overlay to be able to configure from switch without needing Conf5 PC configurator.

If it doesn't work sadly you will have to use EOS instead or just use atmosphere 1.6.2 instead for now...

Also on my Erista I'm currently using GPU UV table which allows to chose voltage per each GPU frequency but I still haven't finished the whole setup on mine.

I'm currently using:

998mhz = 920mv;
921mhz = 885mv;
844mhz = 855mv;
768mhz = 820mv;
691mhz = 790mv;

Still need to find the lowest frequencies but that's the lowest I could go before having issues or lower performance on mine and somehow I'm getting even higher FPS with GPU UV compared to stock which doesn't make much sense on frequencies that I'm not both power or temp limited

Ram I'm currently using 2131mhz at EMC DVB 875mv with timings auto_adj_all (4-2-5-5-3-5-2) but at high voltage of 1.3125v...

I recommend using ram set to No_adj_all and set max voltage of 1.175 and go for the highest frequency you can get at that voltage which is the max "factory spec" safe voltage for the ram chips, some lucky Eristas can actually do 2131mhz at that voltage but most will need like 1.25v or more specially when using gpu_uv seems to require more voltage to be stable.

Ps: in my opinion it's totally fine going above 1.175v on the ram and almost everyone achieving the highest will always use a lot more, but I recommend at least some cooling on the mems and mems are one of the things that usually bring the highest FPS as switch is severely mem bandwidth capped on most games and by far what brings highest performance per lowest power consumption, I measured around 0.6w more from stock mem voltage at 1600mhz to mine at 2131mhz higher voltage which higher CPU\GPU clocks it jumps quickly pretty high.

4IFIR mod 4 example uses crazy 1.35v for 2133mhz on Erista which I totally don't recommend...

EDIT: Attached is an example of the wizard that allows you to configure your loader.kip from switch overlay (this is the conf5 wizard "EPV + Wizard" but the EOS toolkit one should be similar...)

EDIT2: Added testing apps and a nice overlay to test in-game performance on my previous post, removed the picture and put the ".rar" files.

hey, i installed on my OLED but now the max RAM i can get is 1600, what i do to unlock up to 2133 again?

jnl1 · Apr 20, 2024

For me I had to use the package EPV-Wizard and only after rebooting via this package the clocks higher than 1600 worked.

DimitriMaia · Apr 20, 2024

jnl1 said:
For me I had to use the package EPV-Wizard and only after rebooting via this package the clocks higher than 1600 worked.

i tried that, and nothing =/

guily6669 · Apr 21, 2024

DimitriMaia said:
i tried that, and nothing =/

For Mariko use EOS 1.1 + Mariko wizard + latest sys_clk.

You might need to change settings to unrestrict clocks or maybe you can try setting up the EOS loader.kip in the PC using it's configurator instead of using the wizard and see if works.

Anxiety_timmy · Apr 21, 2024

guily6669 said:
1996mhz is fine for all Eristas and will give you a nice speed bump to both CPU and GPU and it's the lowest power consumption thing that will give you by far the biggest jump in performance while increasing CPU and GPU frequency increases power a lot depending on the frequency... the ram from what you have to 1996mhz will likely be something like 0.1 or 0.2w more...

Man I wish 1.996ghz was fine for every Erista because quite simply its not.
I've come across plenty of units that can barely scrape past 1.868ghz without overvolting, some very unlucky people can't push past 1.728ghz.

guily6669 · Apr 21, 2024

IF YOU NEED HELP WITH OC JOIN: NSWITCH 60 FPS CHEATS & MODS DISCORD -> https://discord.com/invite/VndKxFg7EE

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Anxiety_timmy said:
Man I wish 1.996ghz was fine for every Erista because quite simply its not.
I've come across plenty of units that can barely scrape past 1.868ghz without overvolting, some very unlucky people can't push past 1.728ghz.

Mine sucks but always did 1996mhz with stock voltage since old Kazushime OC suite, with auto_adjust_all, now it doesn't, on the newer OC suite I need to use No_adjust_all and actually performs better than auto_adj_all without setting timmings...

But what do you mean by overvoltaging, going above 1.175v??? cause upto that voltage is totally in spec for LPDDR4, above is overvoltaging...

Bricked · Apr 22, 2024

guily6669 said:
SOURCE: NSWITCH 60 FPS CHEATS & MODS DISCORD -> https://discord.com/invite/VndKxFg7EE

Would you mind attaching the source code here? I don't use discord. Why isn't the project on github or something?

guily6669 · Apr 22, 2024

Bricked said:
Would you mind attaching the source code here? I don't use discord. Why isn't the project on github or something?

Did you come from Dominator on Discord??

OC suite is DEAD, no more open source on anything likely due to old

drama, everything is private now...

There's nothing I can do about it other than remove it from here or just keep using the outdated dead OC suite that won't receive more updates, features or fixes anymore

ps: I bet the lion clearly want's the source code so badly...

EDIT: anyway I just asked permission from SciresM, will wait for his reply...

Bricked · Apr 22, 2024

guily6669 said:
Did you come from Dominator on Discord??

OC suite is DEAD, no more open source on anything likely due to old

drama, everything is private now...

There's nothing I can do about it other than remove it from here or just keep using the outdated dead OC suite that won't receive more updates, features or fixes anymore

ps: I bet the lion clearly want's the source code so badly...

EDIT: anyway I just asked permission from SciresM, will wait for his reply...

I don't understand most of what you said there... you said the source was on discord in your previous post so I just asked if you could cross post the source code here along with the release that you posted.

Atmosphere is licensed under GPLv2 so the source code should be readily available to you along with the release. I don't know why you are asking SciresM, you said it was made by someone called B3711?

guily6669 · Apr 22, 2024

Bricked said:
I don't understand most of what you said there... you said the source was on discord in your previous post so I just asked if you could cross post the source code here along with the release that you posted.

Atmosphere is licensed under GPLv2 so the source code should be readily available to you along with the release. I don't know why you are asking SciresM, you said it was made by someone called B3711?

The source I posted was just the source of the info not the source code (already edited and removed source to not mislead anyone)... and you sound like Dominator to me :rofl2:

It's not mine so no, I have no source code but you already likely knew that...

And I'm not 100% sure but it's likely that the source code passed from Kazushime to meha and from meha to B3711 but both and others all went private for that one person not to steal the new latest improved code...

ps: anyway if SciresM replies and it's fine by him my post will stay, if he wants me to remove it, I will, but it's spread all over the internet anyway, I just posted here cause there's no more love for GBATEMP users for some time and was also approved by B3711 now the new latest official dev of the new OC EOS passed to him by meha/Hanai3Bi the official dev of the latest dead OC suite and surely the new improved code is likely mostly the same as the old on github with big improvements...

From B3711:
----------------------------------------------------------------------------------------------------------------

Special thanks to meha, b0rd2dEAth, lineon, KazushiMe, ZatchyCatGames.

----------------------------------------------------------------------------------------------------------------

Bikkies · Apr 22, 2024

I'm trying to figure out how much I should be pushing my OLED switch with this. I'm new to switch overclocking and have been reading everything I can get my hands on. So far I've been using the status monitor overlay to get an idea of where the bottlenecks are in a game, just cranking the RAM straight to 1996 on everything, then bumping up the CPU a little in CPU demanding games to usually 1428 or 1581 if I also have to bump up GPU. But I've found mostly it's really just GPU that needs to be raised to get better performance and visuals out of most things.

There are some games where I've used FPSLocker to unlock 60fps I have to push to 921 on the GPU, but I've now got a game where 921MHz on the GPU juuust isn't enough for a stable 60fps, but 998 is, with a CPU overclock to 1428MHz. My question is what should I be looking out for when going over the "safe" max values and should I drop the CPU clock if I'm bumping the GPU up this high? Because that's kind of what I've been doing, keeping the CPU clock a bit lower if I have to push the GPU higher. Do I check the mV number sitting under the SOC temperature in the sys-clk overlay to make sure that doesn't get too high? How high is too high? Or do I just look at battery power draw and temperatures? But I also don't really know 100% what to look for here in terms of values that might not be good.

And sorry, more questions, someone earlier in this thread posted their speedo values and were also wondering what is considered good there. I've searched and come up empty on what speedo values are considered good. Mine are CPU: 1686 GPU: 1698 SOC: 1721 and LPDDR4X RAM. Can anyone tell me if these are decent and what the normal value range looks like? And when testing the undervolt levels 1-4, what's the go there? Just try them out and see if it crashes/loses performance? I haven't yet tried any of the undervolting settings.

emcintosh · Apr 22, 2024

NX-Venom seems to be another overclocking suite, on GitHub, updated recently. Has anyone tried it?

guily6669 · Apr 22, 2024

emcintosh said:
NX-Venom seems to be another overclocking suite, on GitHub, updated recently. Has anyone tried it?

It's an All-in-one package, for someone who doesn't know how to setup the needed stuff it includes everything and it's also fine...

Bikkies said:
I'm trying to figure out how much I should be pushing my OLED switch with this. I'm new to switch overclocking and have been reading everything I can get my hands on. So far I've been using the status monitor overlay to get an idea of where the bottlenecks are in a game, just cranking the RAM straight to 1996 on everything, then bumping up the CPU a little in CPU demanding games to usually 1428 or 1581 if I also have to bump up GPU. But I've found mostly it's really just GPU that needs to be raised to get better performance and visuals out of most things.

There are some games where I've used FPSLocker to unlock 60fps I have to push to 921 on the GPU, but I've now got a game where 921MHz on the GPU juuust isn't enough for a stable 60fps, but 998 is, with a CPU overclock to 1428MHz. My question is what should I be looking out for when going over the "safe" max values and should I drop the CPU clock if I'm bumping the GPU up this high? Because that's kind of what I've been doing, keeping the CPU clock a bit lower if I have to push the GPU higher. Do I check the mV number sitting under the SOC temperature in the sys-clk overlay to make sure that doesn't get too high? How high is too high? Or do I just look at battery power draw and temperatures? But I also don't really know 100% what to look for here in terms of values that might not be good.

And sorry, more questions, someone earlier in this thread posted their speedo values and were also wondering what is considered good there. I've searched and come up empty on what speedo values are considered good. Mine are CPU: 1686 GPU: 1698 SOC: 1721 and LPDDR4X RAM. Can anyone tell me if these are decent and what the normal value range looks like? And when testing the undervolt levels 1-4, what's the go there? Just try them out and see if it crashes/loses performance? I haven't yet tried any of the undervolting settings.

GPU will be the thing that pushes more FPS most of the times but consumes a lot more power, if you increase the ram a lot usually no matter what frequency you are on the GPU you will always get much better performance at any GPU frequency while not consuming almost any power.

The objective is achieving the max performance without going over the board power limit, if it starts drawing battery while plugged, you are over the board limit, lowering voltages help a lot to reduce power and be able to go higher...

Or to lower voltages a lot to have less power consumption and be able to increase frequencies while playing portable on battery while using around the same power as normal or even underclock for some 2D easy games you can sometimes use even lower clocks than stock and play fine giving even more battery life + lower voltage...

Mariko/OLED can do much more frequencies than Erista at much lower voltages.

Some references:

OCS Version	Ram type	CPU Speedo / low-high vmin	GPU Speedo / vmin	SOC Speedo / DVB	Ram Voltage (Vdd2 / Vddq)	Frequency	Timings	L4T Max	User
2.0.0 RC ul 0.7.0	Samsung AM-MGCJ	1661	1675 / 600mV	1682	1350 / 650	2666	4-4-4-4-3-4-2		MestreYodaRossi
2.0.0 RC ul 0.7.0	Samsung AM-MGCJ	1690	1719 / 630mV	1733/ DVB 4	1212.5 / 650	2566	4-5-5-5-4-6-2		near
2.0.0 RC ul 0.7.2	Samsung AM-MGCJ	1661 / 550mV / 750mV	1675 / 500mV	1682 / DBV 0 (500mV)	925 / 500	1331	4-5-5-5-4-6-3		MestreYodaRossi
2.0.0 RC ul 0.7.2	Samsung AM-MGCJ	1661 / 580mV / 750mV	1675 / 590mV	1682 / DBV 0 (725 mV)	1175 / 600	2400	4-5-5-5-4-6-3		MestreYodaRossi
2.0.0 RC ul 0.7.2	Samsung AM-MGCJ	1661 / 580mV / 750mV	1675 / 600mV	1682 / DBV 0 (775mv)	1187 / 580	2500	4-5-5-5-4-6-3		MestreYodaRossi
2.0.0 RC ul 0.7.2	Samsung AM-MGCJ	1661 / 580mV / 750mV	1675 / 620mV	1682 / DBV 1 (800mV)	1212 / 610	2533	4-5-5-5-4-6-3		MestreYodaRossi
2.0.0 RC ul 0.7.2	Samsung AM-MGCJ	1661 / 580mV / 750mV	1675 / 620mV	1682 / DBV 1 (800mV)	1212 / 610	2533	4-5-5-5-4-6-3		MestreYodaRossi
2.0.0 RC ul 0.7.3	Samsung AM-MGCJ	1661 / 580mV / 750mV	1675 / 610mV	1682 / DBV 2 (825mV)	1200 / 635	2466	4-5-5-5-3-6-3		MestreYodaRossi
2.0.0 RC ul 0.7.3	Samsung AM-MGCJ	1661 / 580mV / 750mV	1675 / 630mV	1682 / DBV 0 (800mV)	1250 / 650	2600	4-5-5-5-4-6-3		MestreYodaRossi
2.0.0 RC5	Samsung AM-MGCJ	1672	1688	1702 / DVB 1 (750mV)	1175/600	2400	4-3-4-4-3-5-3		ChanseyIsTheBest
2.0.0 RC5	Micron WT:F	1700	1717	1731		2400	6-4-4-4-4-5-3		muha
2.0.0 RC6_2	Samsung AA-MGCL	1695 / 590mV / 700mV	1710/ 625 mV	1733/ DVB 1 (750 mV)	1225 / 630	2566	5(22)-5-5-5-5-6-3	2733	хыыыыыыыы
2.0.0 RC6-2	Samsung AM-MGCJ	1627	1634 / 610mV	1663	1200 / 650	2400	4-2-2-2-2-2-2		MasaGratoR
EOS 0.2	Samsung AA-MGCL	1564 / 550mV / 750mV	1570 / 570mV	1577 / DVB 0	1100 / 600	2133	4-2-2-2-2-2-2	3033	Alvise
EOS 0.2	Samsung AA-MGCL	1564 / 550mV / 750mV	1570 / 630mV	1577 / DVB 0	1100 / 600	2400	4-2-2-2-2-2-2	3033	Alvise
EOS 0.2	Samsung AM-MGCJ	1566	1566 / 635mV	1581 / DVB 0 (775mV)	1175 / 600	2400	3-2-0-5-2-5-4		meha
EOS 0.3	Hynix NME	1633 / 550mv / 0	1635 / 590 mv	1653 / DVB 2	1212 / 650	2333	4-2-3-3-5-2		efosamark
EOS 0.3	Micron WT:F	1654	1661 / 610mV	1690 / DVB 0	1175 / 640	2400	5-3-4-3-5-3	2666	jovies
EOS 0.3	Micron WT:F	1643	1658	1677				2700	NaGa
EOS 0.3	Hynix NEE Eco	1696 / 560mV / 750mV	1708 / 645mV	1715 / DVB 0 (800mV)	1187 / 550	2766	4-3-5-2-5-4	3300 (461)	NaGa
EOS 0.3	Hynix NEE	1696 / 610mV / 750mV	1708 / 715mV	1715 / DVB 0 (900mV)	1337 / 550		4-3-5-2-5-4	3300 (461)	NaGa
EOS 0.3	Hynix NEI 8GB Eco	1707 / 560mV / 750mV	1724 / 645mV	1747 / DVB 0 (900mV)	1175 / 550		4-3-5-2-5-4	3266 (461)	NaGa
EOS 0.3	Hynix NEI 8GB	1707 / 600mV / 750mV	1724 / 715mV	1747 / DVB 0 (900mV)	1325 / 550		4-3-5-2-5-4	3266 (461)	NaGa
EOS 0.3	Hynix NME	1606 / 550mV / 0	1618 / 610mV	1639 / DVB 2	1212 / 630	2400	4-2-5-3-5-3		t a s h i
EOS 0.3	Micron WT:F	1670	1690 / 590mV	1705	1175 / 600	2400	5-2-3-3-5-4	2900	Teamoon
EOS 0.3	Micron WT:F	1670 / 600mV / 750mV	1690 / 620mV	1705 / DVB 1	1212 / 620	2566	5-2-3-3-5-4	2900	Teamoon
EOS 0.3	Micron WT:F	1670 / 600mV / 750mV	1690 / 625mV	1705 / DVB 2	1212 / 625	2600	5-2-3-3-5-4	2900	Teamoon
EOS 0.3	Samsung AA-MGCL	1653 / 600mV / 750mV	1653 / 610mV	1683 / DVB 0	1125 / 600	2400	4-4-4-4-5-4		usagi
EOS 0.3	Micron WT:F	1655 / 580mV / 750mV	1678 / 620mV	1710 / DVB 2	1175 / 600	2466	5-2-3-3-5-4		zasx
EOS 0.4	Samsung AA-MGCL	1564 / 550mV / 750mV	1570 / 570mV	1577 / DVB 0	1062 / 570	2133	4-4-4-4-3-3	3033	Alvise
EOS 0.4	Samsung AA-MGCL	1564 / 610mV / 750mV	1570 / 680mV	1577 / DVB 2	1175 / 640	2666	4-4-4-4-3-3	3033	Alvise
EOS 0.4	Samsung AA-MGCL	1630 / 550mV / 750mV	1661 / 610mV	1674 / DVB 1 (800mV)	1150 / 600	2400	4(22)-4-4-4-5-4 AUTO	3100	B3711
EOS 0.4	Samsung AA-MGCL	1630 / 560mV / 750mV	1661 / 625mV	1674 / DVB 1 (800mV)	1162.5 / 635	2500	4(22)-4-4-4-5-4 AUTO	3100	B3711
EOS 0.4	Samsung AA-MGCL	1630 / 550mV / 750mV	1661 / 640mV	1674 / DVB 1 (825mV)	1187.5 / 640	2566	4(23)-4-4-4-5-4 AUTO_HP	3100	B3711
EOS 0.4	Micron WT:F	1669 / 550mV / 750mV	1685 / 600mV	1699 / DVB 0	1175 / 600	2400	5-3-4-3-5-3		hackerman
EOS 0.4	Hynix NME	1614 / default / default	1619 / 610mV	1634 / DVB 3	1175 / 600	2333	3-2-3-2-4-3	2700	landepro
EOS 0.4	Samsung AA-MGCL	1653 / 600mV / 750mV	1653 / 590mV	1683 / DVB 0	1100/600	2333	4-4-4-4-5-4		usagi
EOS 1.0	Hynix NEE	1650	1663 / 660mV	1682 / DVB 0	1175 / 600	2666	(4-4-4)-2-5-3-5-(4-3)		jovies
EOS 1.0 Unlocked	Micron WT:F	1670 / 580mV / 750mV	1690 / 590mV	1705 / DVB 0	1175 / 600	2400	5(13-13-29)5-4-3-5(6-5)	2900	teamoon
EOS/SC 1.1	Micron WT:F	1669 / 550mV / 750mV	1685 / 600mV	1699 / DVB 0	1175 / 600	2400	(5-5-4)-5-4-3-5-(6-5)		hackerman
EOS/SC 1.1	Samsung AA-MGCL	1630 / 550mV / 750mV	1661 / 610mV	1674 / DVB 2 (775mV)	1150 / 600	2400	(13-14-21)-4-4-4-5-(4-4) AUTO	3100	B3711
EOS/SC 1.1	Samsung AA-MGCL	1630 / 550mV / 750mV	1661 / 640mV	1674 / DVB 2 (825mV)	1187.5 / 640	2566	(14-14-25)-4-4-4-5-(4-4) AUTO	3100	B3711
EOS/SC 1.1	Samsung AA-MGCL	1656 / 550mV / 725mV	1654 / 610mV	1684 / DVB 1 (750mV)	1150 / 625	2400	AUTO_ADJ_ALL		MiSi 원스
EOS/SC 1.1	Samsung AA-MGCL	1656 / 550mV / 700mV	1654 / 560mV	1684 / DVB 0 (650mV)	1050 / 550	1600	NO_ADJ_ALL		MiSi 원스
EOS/SC 1.1.1	Micron WT:E	1672 / 550mV / 710mV	1685 / 610mV	1713 / DVB 1	1175 / 640	2400	(15-14-29)-4-4-3-5-5-5 AUTO		Alexthereek
EOS/SC 1.1.1	Micron WT:E	1672 / 580mV / 710mV	1685 / 635mV	1713 / DVB 4 (875mV)	1337.5 / 640	2700	(16-14-30)-2-4-3-5-5-6 AUTO		Alexthereek
OC-SC 0.8	Samsung AA-MGCL	1630 / 550mV / 750mV	1661 / 510mV	1674 / DVB 0 (650mV)	950 / 600	1600	NO_ADJ_ALL	3100	B3711
OC-SC 0.8	Samsung AA-MGCL	1630 / 550mV / 750mV	1661 / 610mV	1674 / DVB 2 (775mV)	1150 / 600	2400	2	3100	B3711
OC-SC 0.8	Samsung AA-MGCL	0	1661 / 625mV	1674 / DVB 1 (800mV)	1162.5 / 635	2500	4(14-15-22)-5-5-5-5-6-4 CUST	3100	B3711
OC-SC 0.8	Samsung AA-MGCL	1630 / 550mV / 750mV	1661 / 640mV	1674 / DVB 1 (825mV)	1187.5 / 640	2566	5(13-14-24)-5-5-5-5-6-4 CUST	3100	B3711
OC-SC 0.8	Hynix NEE	1635 / 560mV / 750mV	1657 / 655mV	1677 / DVB 0	1175 / 610	2666	5-3-5-5-4-6-3		zasx
OC-SC 0.8	Hynix NEE	1635 / 560mV / 750mV	1657 / 680mV	1677 / DVB 4	1175 / 640	2800	5-3-5-5-4-6-3		zasx
Old	Samsung AM-MGCL	1591	1616	1633	1250 / 610	2666	5(20)-5-5-5-5-4-4		mailigorua
Old	Samsung AM-MGCJ	1591	1624	1637	1350 / 620	2630	4(20)-5-4-4-3-4-4		NaGa
Old	Samsung AA-MGCR 8GB	1626	1643	1667 / DVB 0	1250 / 630	2438	5(20)-5-5-5-5-5-4	2966	NaGa
Old	Samsung AA-MGCR 8GB	1655	1661	1683 / DVB 0	1250 / 640	2502	5(20)-5-5-5-5-5-4	3033	NaGa
Old	Samsung AM-MGCL	1707	1724	1747	1350 / 630	2592	4(20)-5-4-5-5-5-4	3033	NaGa
Old	Samsung AM-MGCJ	1680	1695 / 610mV	1718	1200 / 600	2474	4(20)-3-4-4-3-5-3	2700	rynnegatamante
Old	Samsung AM-MGCL	1621	1640	1668	1225 / 610	2666	4-4-5-4-5-5-4		Topuz
	Samsung AM-MGCJ	1661	1675 / 610mV	1682	1200 / 630	2500	4-5-5-5-4-5-2		MestreYodaRossi
EOS 1.0 Unlocked	Micron WT:F	1670 / 610mV / 750mV	1690 / 650mV	1705 / DVB 2 (875mV)	1350 / 640	2733	5(13-13-29)-4-4-3-5-(6-5)	2900	teamoon
EOS 1.0 Unlocked	Micron WT:F Eco	1670 / 570mV / 750mV	1690 / 500mV	1705 / DVB 0 (650mV)	912.5 / 370	1600	AUTO_ADJ_All	2900	teamoon

For best help join the discord:https://discord.com/invite/VndKxFg7EE

Join the discord go to overclocking section and many people will help you, I only have Erista my self.

ps: And to maintain power limits you have to check what the game mostly needs, if it has 97 or more GPU % usage all the time and barely uses CPU it means the game is heavily GPU bound and increasing CPU will likely not do much, if a game uses heavy CPU but not GPU, you push the CPU more and just add the needed GPU power for "X" performance while pushing the ram will be constantly better in giving both CPU and GPU scores, kinda helping them achieve better performance at any frequency, but will always be a point which there's no much gains risking higher cause the performance won't massively go up much and will require a lot more voltage.

Switch-OC-Suite

New Member

Well-Known Member

GbaTemp is my Drug

Attachments

Well-Known Member

GbaTemp is my Drug

Well-Known Member

GbaTemp is my Drug

Member

Well-Known Member

Member

GbaTemp is my Drug

Average Asura

GbaTemp is my Drug

Well-Known Member

GbaTemp is my Drug

Well-Known Member

GbaTemp is my Drug

New Member

On the internet, everyone knows I'm a cat

GbaTemp is my Drug

Similar threads

Popular threads in this forum