I just got 2 EZ-FLASH Omega editions for me and my boyfriend, I tried setting his up first but I didn't format the SD card. The screen kept saying no_loader_found and wouldn't boot up. I tried another tutorial and formatted the SD card but didn't try to update the kernel, but it did boot up and I could play games on it. However after a while it went back to the same blue safe screen with the same no loader found message. I tried formating the SD card again and it booted back up, but none of his games were saving. So I tried extracting the ezkernel.bin to his sd card and updating the kernel by holding R on start up, and I just got this screen that said the update failed because of "Bad NOR ID". I got confused and tried doing the same process for my EZ-FLASH, I formatted the SD card, and extracted the ezkernel.bin update, and it worked perfectly without any issues. I thought maybe his SD card was corrupted from formatting it twice, so i got a new one and did the same exact process as i did for mine, and still got the same bad NOR ID screen. I was just wondering if theres anything i can do or if I need a new EZ-FLASH OMEGA. Thank you!
The card with Bad NOR ID is indeed faulty, please contact your dealer for replacement.
Im having this issue but its happening after I used the de-recovery file, states bad NOR ID. What should I do
Just opened my cartridge with this failure. Cleaned with Alcohol in the chips and it worked.
Flash the SD with this and the program Win32 Disk Manager:
Power on the console with the sd card in the cartridge, press in update, and then power off the console.
Then, Download the kernel of the EzFlash, and leave in the root the file "ezkernel.bin" of the sd card.
Connect the SD in the cartridge and power on the console with the R button Pressed on.
It will be updating the kernel with the file in the root of the sd card.
At least that worked for me. Good luck!
Flash the SD with this and the program Win32 Disk Manager:
Power on the console with the sd card in the cartridge, press in update, and then power off the console.
Then, Download the kernel of the EzFlash, and leave in the root the file "ezkernel.bin" of the sd card.
Connect the SD in the cartridge and power on the console with the R button Pressed on.
It will be updating the kernel with the file in the root of the sd card.
At least that worked for me. Good luck!
Similar threads
-
Xdqwerty
what are you looking at?
-
-
@
realtimesave:
@SylverReZ that reminds me that my friend sells CRTs he gets cheap or free for hundreds of dollars. people are dumb+1 -
-
@
realtimesave:
man I just washed my shoes and they look exactly the same as before I washed them :|
-
-
-
@
RedColoredStars:
i used to go out to the recycling center every couple weeks and look at the crts and other electronics people would drop off. Usually screens were broken or severely scratched from being tossed around. Did find a good one here and there, but never anything like a 1080i widescreen crt. -
-
-
@
BigOnYa:
I have a few of those boat anchors in my basement I tried giving away but no one wanted them, So anyone close to Columbus, Ohio area that wants them, (26", 2x 19") please come get, for free. -
@
RedColoredStars:
Dont know anyone wants those smaller ones. Most are after larger sizes and the kinda top of the line models
-
-
-
-
-
-
-
-
@
a_username_that_isnt_cool:
Is it piracy if it was released for free? Not in my opinion, but I also think it's not piracy if buying it isn't owning it, and it's not piracy if you can't buy it from the original creators anymore. -
-
-
-
-
-
